| General Information |
| Title block with sheet number/title; name, address and telephone number of the applicant and firm or individual who prepared the plans; and date(s) of submission and any revisions |
| Legal and common description of property |
| Scale of site plan and North point |
| Location map drawn at scale of 1 inch = 2,000 feet with North point indicated, including proximity to major thoroughfares and section corners |
| Architect engineer, surveyor, landscape architect, or planner's seal |
| Zoning classification of petitioner's parcel; zoning and use of all abutting parcels |
| Gross acreage |
| Plan narrative (may be separate) including the following information: |
| | General description of any access easements, deed restriction, protective covenants, master deed or association bylaws, and attached copies of same, thereto. |
| | A description of how the proposed final site plan meets the final site plan review standards of § 340-152 of this article. |
| Physical Features |
| Buildings and structures | Location and dimensions of all proposed structures within the site and within 100 feet of the site |
| Dimensioned floor plans and typical elevation views. Include finished floor elevations and contact grade elevations. |
| Location and dimensions for proposed lot lines and boundary property lines. Center line of existing and proposed right-of-way line of any street. Setback and yard dimensions shall be included on each lot. |
| Streets, drives and parking areas | Location and dimensions of proposed parking lots; numbers of spaces in each lot; dimensions of spaces and aisles. Calculation methods shall be shown. |
| Location and alignment of all proposed streets and drives; rights-of-way where applicable; surface type and width, and typical cross-section of same showing surface, base, and subbase materials and dimensions; location and typical details of curbs, with details (where applicable); location, width, surface elevations and grades of all entries and exits; curve radii. |
| Acceleration, deceleration and passing lanes and approaches. |
| Locations of all curb openings within 100 feet of the site, including those across the street. |
| Designation of fire lanes. |
| Landscaping and screening | A detailed landscape plan shall be submitted meeting all the requirements of § 340-163, Landscaping, buffering and screening. |
| Utilities and stormwater | Septic systems and other wastewater treatment systems. The location of the septic tank and the drain field (soil absorption system) should be clearly shown. |
| Sanitary sewers and pumping stations, where applicable. |
| Well sites. |
| Water mains, hydrants, pump houses, standpipes and building services and sizes, where applicable. |
| All site lighting, including building and parking areas and other security areas. Plans shall show height and type of light fixture. |
| Stormwater control facilities and structures including storm sewers, retention and detention basins, drainageways and other facilities, including calculations for size. |
| Environmental | Chemical and fuel storage tanks and containers. |
| Storage, loading, and disposal areas for chemicals, hazardous substances, salt and fuels. |
| Other site features | Sign locations and size. |
| Trash receptacles and transformer pad locations and method of screening. |
| Entrance details for plats or other major developments (as applicable). |
| Location and size of underground tanks, where applicable. |
| Any other pertinent physical features |
| Natural Features |
| Topography, grading and drainage | Location of existing drainage courses and associated bodies of water on and off site, and their elevations. |
| Existing topography with a maximum contour interval of two feet. Topography on the site and beyond the site for a distance of 100 feet in all directions should be indicated. Grading plan, showing finished contours at a maximum interval of two feet, correlated with existing contours so as to clearly indicate required cutting, filling and grading. |
| Natural areas | The plan shall clearly indicate those natural features to remain and to be removed. Mitigation plans, if deemed necessary by the Planning Commission, shall be provided to compensate for the loss of significant natural features, including but not limited to wetlands, floodplain areas, and tree stands. |
| Location of woodlands. Groups of trees shall be shown by an approximate outline of the total canopy. |
| Location and size of proposed improvements of open spaces and recreation areas. |
| Location of existing wetlands, regardless of size. Provide estimated size for each wetland area. |
| Location, type, and size of all proposed landscaping, and the location, height and type of existing and proposed fences and walls. |
| Setbacks | Setbacks from all natural features, as defined in Article XV of this chapter, shall be shown |
| Additional Regulations for Residential Developments |
| Density calculations by type of unit by bedroom counts |
| Designation of units by type and number of units in each building |
| Carport locations and details where proposed |
| Specific amount and location of recreation spaces |
| Type of recreation facilities to be provided in recreation space |
| Detail of community building and fencing of swimming pool, if proposed |
| Additional Requirements for Commercial and Industrial Developments |
| Loading/unloading areas |
| Total of usable floor area |
| Number of employees at peak use |
| Other |
| Any other information deemed necessary by the Planning Commission to adequately review the application, in accordance with the purpose of this chapter. |