A.Â
The industrial district is listed below. When this Zoning Ordinance
refers to industrial, manufacturing, or I zoning districts, it is
referring to the following:
Table 22-1
| ||
---|---|---|
Industrial District
| ||
District Name
|
Map Symbol
| |
Industrial
|
I
|
B.Â
The district name and map symbol are intended to provide a general
indication of what is allowed in the district, with the "I" denoting
the industrial or manufacturing uses.
The purpose of the Industrial District is to encourage a wide
range of industrial, manufacturing, and distribution activities in
order to support the goals and objectives contained in the Unified
Comprehensive Plan. Developments in this district shall employ techniques
to minimize negative impacts (including traffic, parking, glare, noise,
etc.) on adjacent nonindustrial uses, especially established residential
districts and environmentally sensitive areas. New residential uses
are not permitted in this district.
Uses are allowed in the industrial zoning district in accordance
with Table 22-2.
A.Â
Uses identified with a "P" in Table 22-2 are permitted as-of-right
in the subject zoning district, subject to compliance with all other
applicable standards of this Zoning Ordinance.
B.Â
Uses identified with a "SP" in Table 22-2 may be allowed if reviewed
and approved in accordance with the special permit procedures contained
in Article 66.
C.Â
Uses not listed and those identified with a "-" are expressly prohibited.
Table 22-2
| |||
---|---|---|---|
Permitted and Specially Permitted Uses
| |||
P
|
=
|
Permitted
| |
SP
|
=
|
Specially permitted
| |
—
|
=
|
Prohibited
|
Zoning District
| |||
---|---|---|---|
Land Use
|
I
| ||
Industrial
| |||
Lumberyard
|
SP
| ||
Warehousing and enclosed storage
|
P
| ||
Food processing, baking, and packaging plants
|
P
| ||
Enclosed assembly of previously manufactured goods and services
|
P
| ||
Contractor's and building material storage yard
|
SP
| ||
Printing and publishing of books and newspapers
|
P
| ||
Enclosed research, development, experimental or testing lab
|
P
| ||
Laundries and dry cleaning plants
|
SP
| ||
Extractive and mining operations
|
SP
| ||
Enclosed processing of raw materials
|
SP
| ||
Transportation and freight terminal facilities
|
SP
| ||
Enclosed fabric and clothing production facilities
|
P
| ||
Outdoor operations and storage
|
SP
| ||
Self-service storage facility
|
P
| ||
Manufacturing (not including handling of waste products)
|
P
| ||
Manufacturing: waste products or materials
|
SP
| ||
Junkyard
|
SP
| ||
Religious institution
[Added 3-16-2016 by L.L.
No. 2-2016] |
SP
| ||
Commercial
| |||
Wholesale trade
|
P
| ||
Bulk sales and rental
|
SP
| ||
Enclosed motor vehicle repair
|
P
| ||
Motor vehicle sales or rental establishments
|
SP
| ||
Retail and personal service establishments
|
SP
| ||
Bank, medical/dental, professional and business office
|
P
| ||
Motor vehicle parking lot or garage
|
P
| ||
Kennel
|
SP
| ||
Indoor recreation and entertainment venues
|
P
| ||
Outdoor sales, display, or storage
|
SP
| ||
Stand alone drive through establishments
|
SP
| ||
Drive through in conjunction with a permitted use
|
SP
| ||
Institutional
| |||
Public utility
|
P
| ||
Public or municipal use
|
P
| ||
Telecommunications facilities
|
SP
|
The following lot, area, and setback requirements shall apply
to the industrial district within the Town and Villages.
Table 22-3
| ||
---|---|---|
Permitted Lot, Area, and Setback Requirements
| ||
District
| ||
Land Use
|
I
| |
Minimum lot size (with public water and sewer) (square feet)
|
10,000
| |
Minimum lot size (no public water and sewer) (square feet)
|
40,000
| |
Minimum lot width (with public water and sewer) (feet)
|
100
| |
Minimum lot width (no public water and sewer) (feet)
|
100
| |
Minimum front setback(1) (feet)
|
20
| |
Minimum side setback(2)
| ||
Principal use or structure (feet)
|
10/25
| |
Accessory use or structure (feet)
|
10
| |
Minimum rear setback(2)
| ||
Principal use or structure (feet)
|
20/40
| |
Accessory use or structure (feet)
|
20
|
NOTES:
| |
---|---|
(1)
|
Or average of front setbacks on the two adjacent lots, whichever
is less.
|
(2)
|
The first number represents the required setback if the lot
is located adjacent to a commercially zoned property. The second number
is the required setback if the lot is adjacent to an residential property.
|
The following bulk requirements shall apply to the Industrial
District within the Town and Villages.
Table 22-4
| ||
---|---|---|
Industrial Bulk Requirements
| ||
District
| ||
Land Use
|
I
| |
Maximum building height
| ||
Principal use or structure (feet)
|
65
| |
Accessory use or structure (feet)
|
25
| |
Maximum building coverage
|
60%
|