For the sketch plan:
A. 
All maps shall include title, approximate scale, North arrow and date.
B. 
Site maps shall be on a topographical survey map as required for the preliminary plan or an enlargement of the most recent United States Geological Survey quadrangle to a scale of one inch to 200 feet and showing contours at intervals of not more than 20 feet (may be a freehand sketch on a print of such a map) and shall have:
(1) 
Subdivision boundaries.
(2) 
Park and recreation areas, if proposed.
(3) 
Names of owners and approximate boundaries of all contiguous properties more than one acre in area.
(4) 
Town farm lot numbers.
C. 
Development data shall include:
(1) 
Land characteristics of the site.
(2) 
Availability of existing and proposed utilities, schools, parks and playgrounds.
(3) 
Total acreage of subdivision and number of lots proposed and area of each lot.
(4) 
Typical width and depth of lots.
(5) 
Building types and approximate square feet of living area in dwellings.
(6) 
Zoning districts in accordance with the Town of Schroeppel Zoning Map.[1]
[1]
Editor's Note: The Zoning Map is on file in the office of the Town Clerk.
D. 
Legal data shall include:
(1) 
Name and address of subdivider.
(2) 
Name and address of owner.
For the preliminary plan:
A. 
All maps shall include title, scale, North arrow, date and Town farm lot number.
B. 
Site maps shall include:
(1) 
A scale no smaller than one inch equals 100 feet and, if practical, shall be drawn on a sheet size of 24 inches by 36 inches.
(2) 
Bearings and distances of tract boundary lines and reference to control points.
(3) 
Locations and dimensions of existing and proposed:
(a) 
Sections into which the final plat is to be divided, if to be drawn in more than one section.
(b) 
Streets, public facilities or land, easements and similar features.
(c) 
Utilities on and adjacent to the tract, including invert elevation of sanitary, storm and combined sewers and water mains; gas lines, fire hydrants, electric and telephone facilities and streetlights; invert elevation of sewers at proposed points of connection; location of all sewers not adjacent to tract, to which connections are proposed; and invert elevations at points of connection.
(4) 
Topography:
(a) 
For land with an average slope of less than 2%, existing contour lines at not more than one-foot intervals.
(b) 
For land with average slope of 2% to 10%, existing contour lines at not more than two-foot intervals.
(c) 
For land with average slope exceeding 10%, existing contour lines at not more than five-foot intervals.
(d) 
Datum plane for all topographic information to be that of the United States Geological Survey. Bench marks used shall be indicated by location and elevation.
(5) 
Location of percolation test sites, if required.
(6) 
Names of:
(a) 
Owners of adjoining land.
(b) 
Adjoining subdivisions.
(c) 
Proposed subdivision.
(d) 
Proposed streets.
(e) 
Blocks and lots, in accordance with Town of Schroeppel numbering system.
(f) 
Owner and subdivider.
C. 
Neighborhood maps shall have:
(1) 
Subdivision location and boundaries, with Town farm lot number.
(2) 
Location of adjoining tracts and subdivisions existing and planned streets, public facilities and watercourses within 400 feet of any part of the subdivision.
(3) 
A scale of one inch equals 400 feet to one inch equals 2,000 feet.
D. 
Development data shall include:
(1) 
Corrected and updated development data from the sketch plan or as required by the sketch plan.
(2) 
Results of any percolation tests.
(3) 
Drawings showing:
(a) 
Tentative street cross sections and center-line profiles.
(b) 
Preliminary sketches of any bridges or culverts.
(c) 
General feasibility of sewer design and stormwater drainage.
(4) 
Time schedule of operations.
E. 
Legal data shall include:
(1) 
Draft of restrictions of all types which will run with the land and become covenants in the deed for lots.
(2) 
Draft of offers of cession for all sewers, drains, water lines and all land included in streets, utility easements, easements, parks or other public areas not specifically reserved by the subdivides, in a form approved by the Town Board's designated legal counsel, as required.
For the final grading plan:
A. 
All maps shall include title, scale, North arrow, Town farm lot numbers and date.
B. 
Site maps shall be the same sheet size and scale as the final plat.
C. 
Development data shall include:
(1) 
Elevations of the corners of each lot.
(2) 
Elevations at building lines.
(3) 
Center line of road elevations spaced at one-hundred-foot intervals, with elevations at high and low points and changes in grade.
(4) 
Ground elevations at sanitary manholes, storm manholes, catch basins and fire hydrants.
(5) 
Slope arrows to indicate how each part of each lot will drain.
(6) 
Center line of swale elevations and arrows to indicate direction of flow.
(7) 
Typical cross sections of drainage swales.
(8) 
Flood route arrows where grading between lots is critical to provide overland flow route.
(9) 
The drainage system, including catch basins, manholes, culverts and pipe diameters.
(10) 
Drainage easement lines and dimensions.
(11) 
Tract boundary lines, right-of-way lines of streets and lot lines as shown on the final plat.
(12) 
Number to identify each lot or site as shown on final plat.
For the final plat:
A. 
All maps shall include title, scale, North arrow, Town farm lot numbers and date.
B. 
Site maps shall include:
(1) 
A sheet size and scale of 24 inches by 36 inches and one inch equals 50 feet respectively or as approved by the Planning Board.
(2) 
Ink drawing on tracing cloth or a transparent reproduction with black line on cloth or stable plastic base film.
(3) 
Corrected and final planimetric data from the preliminary plan site map, except as modified below:
(a) 
For all street rights-of-way and property lines, the following shall be shown:
[1] 
Accurate dimensions, bearings or deflection angles of all straight lines, except interior parallel lines bound by outermost parallel lines which are prescribed by dimensions and bearings; error of closure may not exceed one foot in 5,000.
[2] 
Radii, arcs and central angles of all curves.
(b) 
For other rights-of-way and easements, the name, bearings and width are required.
(4) 
Survey data: primary control points or descriptions and ties to such control points to which all dimensions, angles, bearings and similar data on map are referred.
(5) 
Information required for the preliminary plan beyond subdivision boundary need not be shown except for boundary streets.
C. 
Location and neighborhood maps:
(1) 
Shall be corrected and updated from preliminary plan.
(2) 
If the final plat is drawn in two or more sections, locations of the sections must be indicated.
D. 
Development data shall include:
(1) 
Corrected and updated development data from the preliminary plan.
(2) 
Detailed drawings and specifications for:
(a) 
Highway systems.
(b) 
Sanitary sewage disposal system.
(c) 
Water supply system.
(d) 
Stormwater drainage system.
(e) 
All other improvements shown on the preliminary plan development data drawings.
E. 
Legal data shall include:
(1) 
Corrected and updated legal data from the preliminary plan.
(2) 
Such other certificates, affidavits, endorsements or agreements as may be required by the Planning Board in enforcement of these regulations.