The developer of the manufactured home park shall submit to the administrator, along with the appropriate fee established in §
152-60, 11 copies of the manufactured home park preliminary plan, at a scale of 100 feet to the inch, which shall show thereon:
A. The proposed manufactured home park name and location;
B. The names and addresses of the owner of record, developer, the person
who prepared the plat, and holders of any easements affecting the
property;
C. The name of all owners of record immediately adjacent to property
proposed as a manufactured home park;
D. The date of drawing, true North point, and scale;
E. A survey of the tract boundary showing bearings and distances;
F. Topographic data compiled by accepted field or photogram metric methods,
with a contour interval no greater than five feet; location of watercourses,
including floodplain limits where applicable; and the high-water line
of natural and artificial lakes;
G. Significant natural landscape features, including rock outcrops and
large trees;
H. The location, width and names of all existing or platted streets
within or adjacent to the proposed manufactured home park and the
location of existing buildings, easements, railroad rights-of-way,
utility lines, and drainageways;
I. Preliminary plans for all utilities, including but not limited to
the proposed method of accomplishing surface drainage, water supply,
and sewage disposal, common or shared easements to franchised cable
television operators, gas, telephone and electric service to the proposed
manufactured home park and preliminary designs for any bridges and
culverts that may be required;
J. The location and dimensions of proposed streets, lots, and easements,
with lots and streets identified by number and proposed name, respectively;
K. The designation of all parcels of land proposed to be dedicated or
reserved for public use and the conditions, if any, of such dedication.
The manufactured home park plan shall include a vicinity sketch
map, at an approximate scale of 2,000 feet to the inch, showing the
relationship of the proposed manufactured home park to its surroundings.
This map shall comprehend an area extending at least 1/2 mile on each
side of the proposed manufactured home park and shall identify roads,
political boundaries, other manufactured home parks, subdivisions,
and important landmarks and natural features.
The following information shall be furnished, either set forth
on the face of the drawing or submitted as separate documents:
A. Where required by this chapter, at the time of filing the final plat,
an erosion and sedimentation control plan approved by the Carroll
County plan-approving authority shall also be filed in accordance
with the provisions of the Virginia Erosion and Sedimentation Control
Handbook; and
B. Signed statements of the appropriated officials concerning the availability
of water, sewer, gas, and electricity of the proposed manufactured
home park; and
C. Private restrictions, if any, proposed for the manufactured home
park.
After receiving notice of approval of the preliminary plat,
the developer shall submit to the administrator four copies of plans
and specifications for all improvements to be installed. The administrator
or agent shall advise the developer concerning the character and extent
of improvements and the estimated amount of the performance bond or
other surety that will be required before final approval of the manufactured
home park plat. The administrator or agent, after consultation with
the Highway Department, PSA, Health Department and other public officials,
shall advise the developer of approval or disapproval, in writing,
within 60 days.
The developer shall, prior to filing with the administrator a final plat for approval, complete all improvements and installation of utilities required under these regulations, or, in lieu of completing said improvements, the developer shall furnish the County with a bond as required by Article
X.
The developer shall, within 18 months after official notification
of approval by the administrator or agent in respect to the preliminary
plat, apply, in writing, to the administrator for approval of the
final manufactured home park plat and submit 11 copies thereof prepared
in accordance with this chapter. The developer may file for approval
only that portion of the approved preliminary plat which he proposed
to record and develop at that time.
Unless an application for final approval is made within 18 months
after approval of the preliminary plat, said approval of the preliminary
plat shall become null and void. The administrator or agent shall,
within 60 days from the date of submittal of the final plat, approve,
modify or disapprove such plat.
The certificate of approval of a final plat shall be as follows:
This manufactured home park, known as ____________________________
Manufactured Home Park, is approved by the undersigned in accordance
with existing manufactured home park regulations and may be committed
to record.
|
Date
|
(Signed)
|
Highway Engineer
|
Date
|
(Signed)
|
Health Officer
|
Date
|
(Signed)
|
PSA Director
|
Date
|
(Signed)
|
Agent of Governing Body
|
NOTE: The foregoing plat is not approved until
all signatures have been obtained.
|
Unless the developer shall have said plat recorded in the office
of the Clerk of the Circuit Court of Carroll County within six months
after final approval by the administrator and before any lots are
rented, leased, or occupied in said manufactured home park, approval
of the final plat shall become null and void; however, in any case
where construction of facilities to be dedicated for public use has
commenced pursuant to an approved plan or permit with surety approved
by the administrator, or where the developer has furnished surety
to the governing body or the administrator by certified check, cash
escrow, bond, or letter of credit in the amount of the estimated cost
of construction of such facilities, the time for plat recordation
shall be extended to one year after final approval or to the time
limit specified in the surety agreement approved by the administrator,
whichever is greater.
The final manufactured home park plat shall be drawn on linen
or other durable transparency of scale-true material with permanent
drafting ink, at a minimum of 100 feet to the inch, except as herein
provided. The plat shall be drawn on one or more sheets, the dimensions
of which shall not exceed 24 inches by 18 inches. Where more than
one sheet is necessary to show the entire plat, match lines shall
be clearly indicated and cover sheet(s) must be included. When cover
sheets are included, the cover sheets may be at a scale appropriate
to the page size. The developer shall submit to the administrator
the original and 10 prints for the final plat.