[Adopted as Title 8, Ch. 3, of the City Code]
For the purpose of this article:
BIMETAL CONTAINER
A container for carbonated or malt beverages that is made
primarily of a combination of steel and aluminum.
CONTAINER BOARD
Corrugated paperboard used in the manufacture of shipping
containers and related products.
CONTAINER GLASS
Includes container glass only. "Glass" does not include ceramic
cups, dishes, ovenware, plate glass, safety and window glass, heat-resistant
glass such as Pyrex, lead-based glass such as crystal, or TV tubes.
CORRUGATED CARDBOARD
Includes corrugated cardboard only; it does not include waxed
cardboard or chipboard such as cereal boxes, shoe boxes, and similar
materials.
FOAM POLYSTYRENE PACKAGING
Packaging made primarily from foam polystyrene that satisfies
one of the following criteria:
A.
Is designed for serving food or beverages.
B.
Consists of loose particles intended to fill space and cushion
the packaged article in a shipping container.
C.
Consists of rigid materials shaped to hold and cushion the packaged
article in a shipping container.
HDPE
High-density polyethylene, labeled by the SPI Code No. 2.
LDPE
Low- density polyethylene, labeled by the SPI Code No. 4.
MAGAZINES
Magazines and other materials printed on similar paper.
MAJOR APPLIANCE
A residential or commercial air conditioner, clothes dryer,
clothes washer, dishwasher, freezer, oven, refrigerator or stove,
residential and commercial furnaces, boilers, dehumidifiers and water
heaters, and allowing the disposal of microwaves if the capacitor
has been removed.
MIXED PAPERS
Includes all grades of papers, including white, colored,
ledger, shiny, coated, carbonless or NCR papers; envelopes, including
windowed, labeled, and kraft; magazines, phone books, computer printout
paper, glued pads and tablets, file folders, key punch cards, post-it
notes, spiral notebooks, cereal boxes, shoe boxes, etc.; can include
paper clips and staples; does not include hand towels or other paper
products from restrooms, or soiled napkins and paper plates; also
does not include carbon paper, cellophane, or any waxed paper.
MULTIPLE-FAMILY DWELLING
A property containing five or more residential units, including
those which are occupied seasonally.
NEWSPAPERS
Includes newspapers and newspaper advertisements, but does
not include catalogues, magazines, cardboard, or other paper products.
OFFICE PAPER
High-grade printing and writing papers from offices in nonresidential
facilities and properties. Printed white ledger and computer printout
are examples of office paper generally accepted as high grade. This
term does not include industrial process waste.
PERSON
Includes any individual, corporation, partnership, association,
local governmental unit, as defined in § 66.0131(1)(a),
Wis. Stats., state agency or authority or federal agency.
PETE
Polyethylene terephthalate, labeled by the SPI Code No. 1.
PLASTIC BOTTLES
Includes only plastic bottles clearly marked with the recycling
emblem, encircling the No. 1 (PET or PETE) or the No. 2 (HDPE); does
not include motor oil bottles, even if they are labeled "No. 1" or
"No. 2."
POST-CONSUMER WASTE
Solid waste other than solid waste generated in the production
of goods, hazardous waste, as defined in § 291.01(7), Wis.
Stats., waste from construction and demolition of structures, scrap
automobiles, or high-volume industrial waste, as defined in § 289.01(17),
Wis. Stats.
PP
Polypropylene, labeled by the SPI Code No. 5.
PS
Polystyrene, labeled by the SPI Code No. 6.
PVC
Polyvinyl chloride, labeled by the SPI Code No. 3.
RECYCLABLE MATERIALS
Includes lead acid batteries; major appliances; waste oil;
yard waste; aluminum containers; corrugated paper or other container
board; foam polystyrene packaging; glass containers; magazines and
other materials printed on similar paper; newspaper and other materials
printed on newsprint; office paper; rigid plastic containers; including
those made of PETE, HDPE, PVC, LDPE, PP, PS, and other resins or multiple
resins; steel containers; waste tires; and bimetal containers.
SOLID WASTE
Has the meaning specified in § 289.01(33), Wis.
Stats.
SOLID WASTE TREATMENT
Any method, technique or process which is designed to change
the physical, chemical or biological character or composition of solid
waste. "Treatment" includes incineration.
TIN CANS
Includes tin coated metal cans, and steel containers.
WASTE TIRE
A tire that is no longer suitable for its original purpose
because of wear, damage or defect.
YARD WASTE
Leaves, grass clippings, yard and garden debris and brush,
including clean woody vegetative material no greater than six inches
in diameter. This term does not include stumps, roots or shrubs with
intact root balls.
Occupants of single-family and two-to-four-unit residences,
multiple-family dwellings and nonresidential facilities and properties
shall separate the following materials from post-consumer waste:
G. Corrugated paper or other container board.
H. Foam polystyrene packaging.
M. Rigid plastic containers made of PETE (SPI Code 1), HDPE (SPI Code
2), PVC (SPI Code 3), LDPE (SPI Code 4), PP (SPI Code 5), PS (SPI
Code 6) and other resins or multiple resins.
The separation requirements of §
312-3 do not apply to the following:
A. Occupants of single family and two-to-four-unit residences, multiple-family dwellings and nonresidential facilities and properties that send their post-consumer waste to a processing facility licensed by the Wisconsin Department of Natural Resources that recovers the materials specified in §
312-3 from solid waste in as pure a form as is technically feasible.
B. Solid waste which is burned as a supplemental fuel at a facility
if less than 30% of the heat input to the facility is derived from
the solid waste burned as supplemental fuel.
C. A recyclable material specified in §
312-3E through
N for which a variance has been granted by the Department of Natural Resources under § 287.11(2m), Wis. Stats., or § NR 544.14, Wis. Adm. Code.
To the greatest extent practicable, the recyclable materials separated in accordance with §
312-3 shall be clean and kept free of contaminants such as food of product residue, oil or grease, or other nonrecyclable materials, including but not limited to household hazardous waste, medical waste, and agricultural chemical containers. Recyclable materials shall be stored in a manner which protects them from wind, rain, and other inclement weather conditions.
Occupants of single-family and two-to-four-unit residences,
multiple-family dwellings and nonresidential facilities and properties
shall manage lead acid batteries, major appliances, waste oil and
yard waste as follows:
A. Major appliances shall be recycled at a retail business that sells
appliances and accepts used appliances for the purpose of recycling.
The City Administrator/Clerk-Treasurer may be contacted for names
of possible disposal outlets. Any fee charged for collection by the
City of Princeton shall be the responsibility of the generator.
B. Lead acid batteries shall be recycled at a retail business that sells
lead acid batteries and accepts used batteries for the purpose of
recycling. Any fee imposed for the recycling of used batteries shall
be the responsibility of the generator.
C. Waste oil shall be recycled at a retail business that sells oil or
automotive products and accepts oil for the purpose of recycling.
A fee imposed for the recycling of used oil shall be the responsibility
of the generator.
D. Yard waste shall be either home composted using an effective backyard
compost system, or placed at the curb or alleyway for collection by
City of Princeton employees at designated times and dates. Any fee
charged by the City shall be the responsibility of the generator.
E. Waste tires shall be recycled at a retail business that sells tires
or automotive products.
Recyclable materials specified under §
312-3 shall be collected by the City, or a City-contracted collecting and transporting service biweekly for all residential properties (up to four units) and small commercial units which do not produce more than one ninety-five-gallon cart of solid waste in one week, or more than one ninety-five-gallon recycle cart in every two weeks. All material shall be properly separated, handled, prepared and contained, stored, and located in conformance with this article and rules and regulations established and publicized by the solid waste and recycling coordinator. Curbside recycling is mandatory, and residents will be required to comply when they are served by a recycling route. Such collection of recyclable materials shall be provided at no charge for one rollout container as provided by the City. Recyclable materials containers shall be placed out for collection separated three feet from the post-consumer waste containers on the regular post-consumer waste collection day.
No person may dispose of in a solid waste disposal facility or burn in a solid waste treatment facility any of the materials specified in §
312-3E through
O and §
312-4 which have been separated for recycling, except waste tires may be burned with energy recovery in a solid waste treatment facility.
No person or corporation shall engage in the business of hauling
recyclables within the City of Princeton without being licensed by
the Wisconsin Department of Natural Resources under § NR
502.06, Wis. Adm. Code.
The City of Princeton shall, to the extent practicable, make
purchasing decisions to maximize the purchasing of products made from
recycled and recovered materials. The City of Princeton shall, to
the extent practicable, award contracts for equipment and supplies
on the basis of recyclability and ultimate disposition of products
to discourage the purchase of single-use disposable products and require
purchase of multiple-use durable products.
It shall be unlawful for any person, unless under contract with
or licensed by the City of Princeton or with the express permission
of the adjacent property owner who placed the item of refuse for collection,
to collect or remove any such refuse that has been deposited or placed
at the curb or any container adjacent to a home or nonresidential
building for the purposes of collection. Recyclables placed for collection,
however, may be removed without such express consent.
[Adopted as Title 8, Ch. 4, of the City Code]
It shall be unlawful for any person to dispose of or dump garbage
in any street, alley or other public place within the City of Princeton,
unless it is placed in bags or containers in the manner and at the
time specified by this Code of Ordinances.
It shall be unlawful for any person to place for disposal any
of the following wastes: Hazardous and toxic waste, chemicals, explosives,
flammable liquids, paint, trees and stumps, construction debris, or
carcasses.
It shall be unlawful to bring refuse for disposal and recyclables
from outside the corporate limits into the City of Princeton unless
authorized by agreement with the City.
For-profit haulers who collect solid waste or recyclables in
the City of Princeton for storage, treatment, processing, marketing
or disposal shall obtain and maintain all necessary municipal and
state permits, licenses and approvals prior to collecting any materials
in the City of Princeton.
The City may establish fees for service recipients for the payment
of collection services for solid waste and recyclables.
No hot cinders or ashes or any smoldering embers shall be set
out or placed in a refuse container of any kind on the day of collection.
Portable receptacles for rubbish and ashes shall be of metal.
All waste resulting from the remodeling or construction of a
building, roadway or sidewalk shall be disposed of by the owner, builder
or contractor.
[Added 1-27-2015 by Ord.
No. 2015-02]
A. Placement
for collection. Post-consumer waste and recycling materials subject
to collection by the City shall be placed in an approved container
provided by the waste hauler (contractor). Such containers shall be
placed for collection at the curbline, facing the street, three feet
away from each other and from any other structure allowing for an
automated pickup process.
B. Collection
times. Approved collection containers shall be placed at the curbline
by 6:00 a.m. on the scheduled day of collection. They shall be placed
at the curbline not more than 12 hours prior to the collection day
and shall be removed not more than 12 hours after collection day.
The annual collection schedule will be made available at City Hall.
Failure to comply shall be a violation of this section and may result
in the issuance of a citation.
C. Containers.
(1) One
ninety-five-gallon solid waste cart and one ninety-five-gallon recyclable
cart will be provided to each household. All containers are the property
of the contractor. The contractor will replace, without cost, any
carts damaged by the contractor during the collection process. Any
carts damaged by a household unit beyond normal wear and tear, or
a cart that is lost, stolen or otherwise deemed unusable, will be
replaced by the contractor and the replacement cost charged to the
City and subsequently billed to the property owner. Carts shall remain
with the applicable household unit at all times. Transfer of property
ownership or new tenants at a residence shall not constitute the issuance
of new carts for the property.
(2) Should
the property require more than one solid waste cart or one recyclable
cart, the homeowner will be required to contract independently with
a contractor for pickup and disposal of their refuse.