All nonresidential land developments, and commercial and industrial
subdivisions, shall comply with the applicable requirements of this
chapter unless otherwise specified in this article.
Each lot or area plotted for commercial and/or industrial use shall provide, inside of the required yards, an area at least equal to the projected horizontal area of the proposed building, plus such additional area as is required for parking in conformance with Chapter
400, Zoning. Such area shall have an average slope not greater than 10% and shall be accessible from the existing or proposed road by means of adequately and properly designed service drives having a maximum grade of 12%. In the case of lots using an on-lot sewage disposal system, in addition to such area, there shall be sufficient area, separate and apart from parking areas, for the sewage disposal field, and sufficient area for a replacement field, tested and approved in accord with Department of Environmental Protection regulations.
Wherever possible, commercial and industrial parcels shall include
sufficient land to provide for a group of commercial and industrial
establishments, planned, developed, and operated as a unit. In no
case will narrow, highway ribbon developments be approved. Individual
driveways shall not be permitted and interior service roads shall
be required.
Roads in commercial and industrial developments shall comply with the requirements of §
355-49 and shall be constructed to collector road standards as required by this chapter.