[Amended 4-27-2016 by Ord. No. 16-010; 12-13-2017 by Ord. No. 17-068]
Each of the following technical codes are hereby adopted by reference:
A. 
The International Building Code, 2015 edition, including Appendix F, Rodentproofing; Appendix G, Flood-Resistant Construction; Appendix I, Patio Covers; and Appendix J, Grading, as published by the International Code Council (ICC).
B. 
The International Residential Code, 2015 edition, including Appendix A, Sizing and Capacities of Gas Piping; Appendix B, Sizing of Venting Systems Serving Appliances Equipped with Draft Hoods, Category I Appliances, and Appliances Listed for Use with Type B Vents; Appendix C, Exit Terminals of Mechanical Draft and Direct-Vent Venting Systems; Appendix D, Recommended Procedure for Safety Inspection of an Existing Appliance Installation; Appendix G, Piping Standards for Various Applications; Appendix H, Patio Covers; Appendix K, Sound Transmission; as published by the International Code Council, except the following chapters are hereby specifically deleted in the 2015 Residential Code; Chapter 25, Plumbing Administration; Chapter 26, General Plumbing Requirements; Chapter 27, Plumbing Fixtures; Chapter 28, Water Heaters; Chapter 29, Water Supply and Distribution; Chapter 30, Sanitary Drainage; Chapter 31, Vents; Chapter 32, Traps; Chapter 33, Storm Drainage; Chapter 34, General Requirements; Chapter 35, Electrical Definitions; Chapter 36, Services; Chapter 37, Branch Circuit and Feeder Requirements; Chapter 38, Wiring Methods; Chapter 39, Power and Lighting Distribution; Chapter 40, Devices and Luminaires; Chapter 41, Appliance Installation.
C. 
Illinois State Plumbing Code, current edition, as published by the Illinois Department of Public Health.
D. 
International Mechanical Code, 2015 edition, including Appendix A, Chimney Connector Pass-Throughs, as published by the International Code Council.
E. 
International Fuel Gas Code, 2015 edition, including Appendix A, Sizing and Capacities of Gas Piping; Sizing of Venting Systems Serving Appliances Equipped With Draft Hoods, Category I Appliances and Appliances Listed for Use with Type B Vents; Appendix C, Exit Terminals of Mechanical Draft and Direct-Vent Venting Systems; Appendix D, Recommended Procedure for Safety Inspection of an Existing Appliance Installation; as published by the International Code Council.
F. 
NFPA 70, National Electrical Code, 2014 edition, as published by the National Fire Protection Association, Inc.
G. 
International Energy Conservation Code, 2015 or current edition, as adopted by the State of Illinois and as published by the International Code Council; and the Illinois Energy Conservation Code, current edition with supplements.
H. 
International Property Maintenance Code, 2015 edition, as published by the International Code Council.
I. 
International Existing Building Code, 2015 edition, as published by the International Code Council.
J. 
International Swimming Pool and Spa Code, 2015 edition, as published by the International Code Council.
K. 
International Solar Energy Provisions, 2015 edition, as published by the International Code Council.
L. 
International Fire Code, 2015 edition, as published by the International Code Council and any local amendments as adopted by the Fire District having jurisdiction in its Fire Prevention Code.