Codes adopted by this Part 3 to govern construction and other
regulated activities shall also govern the use, occupancy and condition
of buildings and structures following issuance of a UCC certificate
of occupancy. The Board of Supervisors shall have authority to designate
persons responsible for administration and enforcement of such codes
following construction and other activity regulated by the UCC, and
such code administration and enforcement personnel shall have all
authority to inspect premises, issue notices (including stop work,
unsafe building and other orders) and take other actions as are necessary
to ensure compliance with standards of said codes.
In addition to the standards as set forth in the UCC and codes adopted in §
29-49 of this Part
3, all construction activity subject to the UCC and this Part
3 shall further comply with the following requirements:
A. Design frost depth. Use 48 inches to the bottom of footing.
B. Design snow load. Use a roof snow load of 40 psf (pounds per square
foot) applied as per Section 1608 of the International Building Code.
C. Design wind load. Use values and methodology provided in Section
1609 of the International Building Code for the specific structure
type and condition.
D. Knox-Box®. A Knox-Box (or box containing a key which will allow
for entry by Fire Department personnel) shall be installed outside
the main door of a commercial or industrial building.
E. Table R301.2(1) of the International Residential Code shall be as set forth on Appendix A to this Part
3.