Standard
|
Requirement
| ||
---|---|---|---|
Residential Density:
| |||
All single-family attached and multifamily dwelling units as
part of a mixed-use development
|
6 dwelling units per acre (additional dwelling units per acre
may be permitted with an approved CUP)
| ||
Minimum lot area
|
None
| ||
Minimum lot width
|
None
| ||
Maximum lot coverage (See Note 1)
|
80% (lot coverage may exceed 80% up to 100% with an approved
CUP)
| ||
Maximum setback from external right-of-way (See Note 2)
|
30 feet
| ||
Minimum setback from right-of-way for commercial/mixed-use buildings
|
0 feet, or the average of adjacent buildings not to exceed 30
feet.
| ||
Minimum setback from right-of-way for residential buildings
|
20 feet
| ||
Minimum rear yard:
| |||
Single-family attached dwellings (duplexes, triplexes, quadruplexes
and townhouses)
|
20 feet (may include alley)
| ||
Multifamily buildings (apartments)
|
20 feet (may include alley)
| ||
Commercial/mixed-use buildings
|
0 feet, 10 feet when abutting a residential district (may include
alley)
| ||
Minimum side yard:
| |||
Single-family attached dwellings
|
10 feet (end unit)
| ||
Multifamily buildings (apartments)
|
10 feet (end unit)
| ||
Commercial/mixed-use buildings
|
0 feet, 10 feet when abutting a residential district (may include
alley)
| ||
Maximum height: (See Note 3)
| |||
Commercial and mixed-use
|
50 feet
| ||
All attached and multifamily residential
|
50 feet
| ||
Accessory structures
|
25 feet (may exceed 25 feet up to 50 feet with an approved CUP)
|
NOTES:
| |
---|---|
Note 1: Maximum lot coverage requirement of 80% shall not apply
to lots of record of 10,000 square feet or less existing at the time
of adoption of the VMU District ordinance.
| |
Note 2: Maximum setback requirements shall not apply to commercial
or mixed-use buildings existing at the time of adoption of the VMU
District.
| |
Note 3: Architectural features such as chimneys, towers, belfries,
cupolas, monuments, mechanical equipment, vents, spires, flag poles
and/or similar architectural or structural features may exceed the
height limits. Parapet walls may be up to four feet above the height
of the building on which the walls rest.
|