[Ord. No. 958 § 1, 2-18-1985]
For the purpose of this Article, the following terms, phrases, words, and their derivation, shall have meaning as follows. All definitions and terminology used in this Article not defined below shall be in conformance with applicable publications of the American National Standards Institute (ANSI).
The sound pressure level in decibels as measured on a sound level meter using the A-weighting network. The level so read is designated dB(A) or dBA.
A unit for measuring the volume of a sound, equal to twenty (20) times the logarithm to the base ten (10) of the ratio of the pressure of sound measured to the reference pressure, which is twenty (20) micropascals [twenty (20) micronewtons per square meter].
An exhaust system in which the original noise abatement devices have been physically altered causing them to be less effective in reducing noise or the original noise abatement devices have either been removed or replaced by noise abatement devices which are not as effective in reducing noise as their original devices, or devices have been added to the original noise abatement devices such that noise levels are increased.
Any automobile, van, motorcycle, motor-driven cycle, motor scooter, dune buggy, snowmobile, all-terrain vehicle, trail bikes or any other off-road vehicle, go-cart, minibikes, truck with gross vehicular weight of less than eight thousand (8,000) pounds [three thousand six hundred twenty-eight and eight tenths (3,628.8) liters].
The A-weighted sound level produced by a motor vehicle.
Any person, firm, association, partnership or corporation.
An instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels. Such instrument shall be used for measurement of the intensity of sound and calibrated in decibels. Readings shall be made on a dB(A) scale.
Sound made by a motor vehicle operated either on the public right-of-way or private property.