A.
To preserve farmland and implement the goals and objectives of the Town of Vinland's Land Use Plan (and future Comprehensive Plan), any new subdivisions will be required to meet the development criteria established below and shall be platted using the cluster subdivision process as described in § 361-61 of this chapter.
B.
Depending on where a potential subdivision may be located, such plat may have different development criteria. It is important that a developer or property owner is aware of the geographic area or zone his or her property is located within to understand the conditions that will need to be met in order to obtain Town approval.
C.
For the purpose of this chapter, a certified survey map may only be used for the creation of four parcels less than five acres in size within a five-year period, and a subdivision may be only used to create a minimum of 10 or 20 parcels, depending on the zone location. The creation of five to nine parcels for residential purposes shall not be allowed unless the additional parcels being created are greater than five acres in size. Properties zoned commercial may create five or more lots less than five acres in size by platting, providing each lot is a minimum of one acre or larger and subject to compliance with all other Town zoning and subdivision ordinances.
D.
Zone 1.
(1)
Geographic Density - Zone 1: the Town of Vinland requires any subdividing in Zone 1, defined as Sections 8, 9, 10, 11, 14, 15, 16 and 17 in Range 16 East, which are all west of Highway 76, to have not less than 10 lots and that such a subdivision in these areas shall follow the cluster form of platting as regulated under §§ 361-61 to 361-66 of this chapter.
(2)
Conservation Area Standards - Zone 1: Lot size in Zone 1 shall be 1 1/2 acre minimum. A minimum of 50% of the plat shall be open common space. A community well or sewer system and buffer areas can be part of the fifty-percent conservation area.
E.
Zone 2.
(1)
Geographic Density - Zone 2: the Town of Vinland requires any subdivision in Zone 2, defined as Sections 1, 2, 3, 4, 5, 6, 7, 12, 13, 18, 19, 20, 21, 22, 23 and 24 in Range 16 East and Sections 16, 17, 18, 19, 20 and 21 in Range 17 East, to have not less than 20 lots and that such subdivision in these areas shall follow the cluster form of platting as regulated under §§ 361-61 to 361-66 of this chapter.
(2)
Conservation Area Standards - Zone 2: Lot size in Zone 2 shall be 1/2 to 1 1/4 acre. A minimum of 25% of the plat shall be open common space. A community well or sewer system and buffer areas can be part of the twenty-five-percent conservation area.
Where necessary to accommodate a private sanitary system other than a holding tank, an individual lot size may be increased in order to accommodate the construction of the sanitary system. In applying the provisions of this section, the Town shall review this on a lot-by-lot basis, not on the subdivision as a whole.