[Ord. 778, 5/8/2012, § 1; as amended by Ord. 788,
4/9/2013, § 1]
The P Public District is established to preserve and protect
portions of the Borough's open space, historical and cultural resources
and public recreation land, and to promote public use, enjoyment and
enhance community quality of life.
[Ord. 778, 5/8/2012, § 1]
1. Principal permitted uses.
A. Municipal parks and recreation.
B. Municipal facilities and services necessary to public health and
welfare.
C. Museums, exhibition and cultural facilities.
E. Public school.
[Added by Ord. No. 836, 9/11/2018]
2. Accessory uses.
A. Uses and buildings customarily incidental and appurtenant to principal permitted uses (see §
27-1421).
[Ord. 778, 5/8/2012, § 1; as amended by Ord. 788,
4/9/2013, § 1]
1. The following conditional uses may be authorized pursuant to the
standards and criteria set forth in Part 15:
[Ord. 778, 5/8/2012, § 1]
There are no uses by special exception in the P Public District.
[Ord. 778, 5/8/2012, § 1]
1. Minimum lot area-no minimum specified.
2. Minimum lot width-no minimum specified.
3. Lot coverage-no maximum specified.
4. Yards.
A. Minimum front yard-no minimum specified.
B. Minimum side yard-no minimum specified.
C. Minimum rear yard-no minimum specified.
5. Maximum height of an accessory structure shall be 35 feet. The second
floor of an accessory structure shall not exceed 50% of the area of
the exterior footprint of the accessory structure.
[Amended by Ord. No. 836, 9/11/2018]
6. The footprint area of an accessory structure is not to exceed 15%
of the lot area. The total aggregate side yard dimensions for an accessory
structure are 10 feet with a minimum two-foot side yard distance on
one side or a minimum five feet from an adjoining building. The area
of the exterior footprint of an accessory structure cannot exceed
80% the area of the exterior footprint of the principle structure.
7. Maximum building height: 35 feet (all principal permitted or conditional
uses).
[Ord. 778, 5/8/2012, § 1]
Parking and signage design and construction shall comply with standards specified in Part
16 of this chapter.