1.
|
Historically appropriate lighting should be used for the renovation
of all historic projects. For new construction, exterior lighting
should be architecturally integrated with the building style, material
and colors.
|
2.
|
In the absence of appropriate historic lighting models, concealed,
vandal resistant up-lighting should be employed for lighting monuments
or noteworthy buildings.
|
3.
|
Excessive illumination of the signage, building or site should
be avoided. Roof lighting, down-lighting washing the building walls,
and illuminated awnings are all strongly discouraged.
|
4.
|
Exterior lighting of the building and site should be designed
so that light is not directed off the site and the light source is
shielded from direct offsite viewing.
|
5.
|
Fixture mounting height should be appropriate for the project
and the setting. Use of low, bollard-type fixtures are encouraged
as pedestrian area lighting. The mounting height of fixtures in smaller
parking lots or service areas should not exceed sixteen feet (16'),
with lower mounting heights encouraged, particularly where adjacent
to residential areas or other sensitive land uses.
|
6.
|
Raised light pole bases should be attractively designed and
well detailed to be compatible with the overall project. The use of
"sonotube" type concrete pole bases is discouraged.
|
7.
|
Exterior lighting sources that provide full-spectrum white light
(metal halide lamps or approved equal) are strongly encouraged.
|
8.
|
Full cutoff lighting is strongly encouraged.
|