Any drain or conveyance, whether on the surface or subsurface,
that allows any nonstormwater discharge, including sewage, process
wastewater, and wash water to enter a municipal separate storm sewer
(if applicable), or waters of this commonwealth, and any connections
to the storm sewer from indoor drains and sinks; and
Any drain or conveyance connected from a commercial or industrial
land use to the municipal separate storm sewer (if applicable) which
has not been documented in plans, maps, or equivalent records, and
approved by the Borough.
No person shall allow, or cause to allow, discharges into surface waters of this commonwealth which are not composed entirely of stormwater, except: as provided in Subsection D below; and discharges allowed under a state or federal permit.
No person shall place any structure, fill, landscaping or vegetation
into a SWM facility or within a drainage easement that will limit
or diminish the functioning of the facility in any manner.
Pavement wash waters where spills or leaks of toxic or hazardous
materials have not occurred (unless all spill material has been removed)
and where detergents are not used.
In the event that the Borough or DEP determines that any of the discharges identified in Subsection D above significantly contribute to pollution of the waters of this commonwealth, the Borough or DEP will notify the responsible person(s) to cease the discharge.
No person shall modify, remove, fill, landscape, or alter any
SWM BMPs, facilities, areas, or structures without the written approval
of the Borough.