[Amended 5-11-1995 by L.L. No. 3-1995]
A. All submittals requiring Planning Board action shall be submitted
to the Zoning Officer by the Wednesday before the fourth Monday of
each month to be scheduled for the Planning Board meeting. The package
shall include the plans, reports, sketches and exhibits that are required
for review by the Board.
[Amended 11-13-1997 by L.L. No. 5-1997]
B. Before plans are submitted to the Planning Board for review, they
shall be checked by the designer according to the following lists
for the various phases of plan development.
C. Incomplete submittals shall be cause for rejection by the Planning
Board until they comply with the listed items.
The sketch plan shall be a schematic representation of existing
conditions and proposed improvements, including:
A. Scale (no smaller than one inch equals 100 feet).
B. Title or name of development.
C. North point, scale and date.
D. Name(s) of the record owner(s), developer(s) and their addresses.
E. Name of design professional responsible for preparation of plan.
F. Zoning district and limitations.
G. Property boundary dimensions.
H. General location plan (one inch equals 2,000 or greater feet).
I. Names of adjacent owners.
K. Total holdings map. Where the sketch plan covers a portion of the
applicants holdings, at a minimum a Tax Map shall be submitted showing
the proposed development on the overall parcel and its effect on future
development.
L. General topography (contour intervals of five feet) on United States
Coast and Geodetic Survey datum.
M. Indication of all existing natural features.
N. Indication of all existing utilities, roads, dwellings, etc.
[Amended 6-25-2020 by L.L. No. 3-2020]
O. Schematic indication of development, utilities, roads, etc.
P. Schematic method of water supply and sanitary sewage disposal.
Q. Agricultural data statement.
In addition to the requirements for a sketch plan, the following
will be required for the preliminary plan:
A. Scale (no smaller than one inch equals 50 feet).
B. Property boundaries with bearings and distances.
C. Existing topography (contour intervals of two feet maximum) shall
be shown to properly evaluate and plan the development.
D. Zoning setbacks and restriction lines.
E. Topography datum from the United States Coast and Geodetic Survey.
F. Benchmark based on United States Coast and Geodetic Survey datum.
G. All existing natural features: watercourses, tree masses, etc.
H. All existing buildings, culverts, utilities with dimensions, sizes
and inverts with other significant man-made features.
I. All existing property lines, easements or other encumbrances on the
property, certified by a licensed land surveyor per a recent survey
and the purpose for which the easements or right-of-way were established.
J. Percolation and deep test holes and locations with results (if applicable).
K. Special information as requested by the Planning Board at sketch
plan stage.
L. Where the preliminary plan covers only a part of the applicant's
entire holdings, a concept of a prospective street and utility layout
for the remainder of the property.
M. Sight distances for access to the parcel or proposed streets (required
and provided).
N. Design report for major subdivisions.
O. Location and approximate dimensions and sizes of development improvements.
P. Profiles of proposed streets, utilities, etc., with approximate grades.
Q. Preliminary designs of culverts, pump stations, bridges, sewers,
road sections, etc.
R. Proposed location, size and width of easements, parks, right-of-way,
public areas or parcels of land to be dedicated or reserved for public
use.
S. Stormwater pollution prevention plan. A stormwater pollution prevention plan (SWPPP) consistent with the requirements of Chapter
255 and §
300-44 shall be required for preliminary site plan/subdivision submittal. The SWPPP shall meet the performance and design criteria and standards in §
135-43. The approved preliminary site plan/subdivision plan shall be consistent with the provisions of Chapter
255 and §
300-45.
[Amended 6-25-2020 by L.L. No. 3-2020]