The HI Heavy Industrial District is designed to accommodate
those heavy industrial activities which by their character should
be relatively remote from residential and business development. The
uses may require large parcels of land and may include the manufacture
of raw materials or component parts into a more finished product or
material. The following regulations shall apply to all Heavy Industrial
Districts.
[Amended 5-6-2024 by Ord. No. 2024-008]
Permitted uses shall be as defined in Table 5: Land Use Regulations
and Matrix of Land Uses.
Lot requirements with public sewer shall be as follows:
A. Area: 20,000 square feet minimum.
B. Zoning lot frontage: 100 feet minimum. Such minimum lot frontage
may be measured at the building setback line if said lot is located
on the outer radius of a street, such as a cul-de-sac. In no case
shall lot width measured at the right-of-way line of a cul-de-sac
or curved street be less than 85 feet.
C. Lot width: 150 feet minimum.
Lot requirements without public sewer shall be as follows:
A. Area: 60,000 square feet minimum.
B. Zoning lot frontage: 150 feet minimum. Such minimum lot width may
be measured at the building setback line if said lot is located on
the outer radius of a curved street or a cul-de-sac. In no case shall
the lot width measured at the right-of-way line of a cul-de-sac or
curved street be less than 85 feet.
Height regulations shall be as follows:
A. Primary structure: 60 feet maximum, except as provided in §
135-13, Height regulations.
There shall be no buildings located on a lot without approval.
Seventy-five percent of the total lot area may contain building
coverage. Twenty-five percent of the total area shall remain green
space.
Parking shall conform to requirements as set forth in Article
XXI, Parking Requirements.