Article X Design Standards for Site Plans

All parking spaces shall be designed free and clear of any obstruction to individual parking stalls.

Parking spaces shall be located in such a fashion as to permit all vehicles to exit in a safe and orderly manner. Under no condition shall vehicles be permitted to back out of a parking lot driveway or otherwise block the free movement of traffic within the parking area or specific points of safety control, such as fire hydrants, doorways, elevators or other similar locations.

Aisle widths and circulation patterns shall be designed to permit emergency and service vehicles such as delivery trucks, solid waste collection vehicles and the like, to have reasonable access to and space for their intended functions.

Pedestrian circulation within a parking area shall be, to as great an extent as possible, separated from vehicular traffic. Safety zones, crossing points and sidewalk areas, where warranted, shall be provided.

Driveway Design Criteria.

Location of driveways. All entrance and exit driveways to a public or private street shall be located so as to afford maximum safety to the roadway, to provide for safe and convenient ingress and egress and to minimize conflict with the free flow of traffic. In no case shall unrestricted access along the length of the street or streets upon which the parking area abuts be permitted.

Sight distances.

The minimum sight distances established herein shall be adhered to between a driveway and the adjoining street in accordance with the site triangle definition. The driveway shall be designed in profile and grading shall be reviewed by the Borough Engineer.

For the purpose of this chapter, sight distance measurement shall be measured from the driver's seat of a standing vehicle, located on that portion of the exit driveway that is immediately contiguous to the traveled way, with the front of the vehicle 10 feet behind the right-of-way line of the road, with the height of the eye 3.75 feet to the top of the object 4.5 feet above the pavement.

Table 4
Minimum Sight Distance from a Driveway and Adjoining Street
Maximum Allowable Speed on Roadway (miles per hour)	Minimum Sight Distance (feet)
25	175
30	250
35	325
40	400
45	450
50 or more	500

Where a site is located at the intersection of two streets, no driveway entrance or exit shall be located within 50 feet of the point where the curb return of the street intersection and the curbline meet.

No part of any driveway shall be located closer than 20 feet from any other driveway on the adjoining parcel nor shall more than one driveway be located closer than 40 feet to another driveway on the same site, as measured from the closest edge of any two driveways along the same right-of-way line.

No entrance or exit driveway shall be located on a traffic circle or on a ramp of an interchange or within 50 feet of the beginning of any ramp or other portion of an interchange.

(f)

Geometric design. The geometric design of a driveway connection to a public or private street shall be governed by sound traffic engineering principles. The following guidelines are utilized in preparing a geometric design, but some deviation may be necessitated from time to time due to the many variables encountered in the course of preparing a design. The applicant should be aware, therefore, that although the driveway layout may conform to these guidelines, conditions may dictate deviation from them and that the requirements of the Borough Engineer shall be final.

Two-way operation. Driveways used for two-way operation will intersect a public or private street at an angle to as near 90° as site conditions will permit and in no case will be less than 60°.

One-way operation. Driveways used for vehicles in one direction of travel (right turn only) shall not form an angle smaller than 45° with a public street.

The dimensions of driveways shall be designed to adequately accommodate the volume and character of vehicles anticipated to be attracted daily onto the land development for which a site plan is prepared. The required maximum and minimum dimensions for driveways connecting to a public or private street at 90° are indicated in Table 5. Driveways serving large volumes of daily traffic, or traffic over 25% of which is truck traffic, shall be required to utilize high to maximum dimensions. Driveways serving low daily traffic volumes, or traffic less than 25% of which is truck traffic, shall be permitted to use low to minimum dimensions.

Table 5
Driveway Widths, Depressed Curbs and Curb Return Radius Standards
Use	One-Way Operation			Two-Way Operation
	Driveway Width (feet)	Depressed Curb (feet)	Curb Return Radius (feet)	Driveway Width (feet)	Depressed Curb (feet)	Curb Return Radius (feet)
3 to 10 du	12 to 15	22 to 25	20 min./30 max.	24 to 30	44 to 50	20 min./30 max.
Over 10 du	18 to 20	35 to 38	20 min./30 max.	24 to 30	46 to 52	25 min./35 max.
Commercial and Industrial	18 to 30	35 to 50	35 min./45 max.	30 to 50	50 to 70	35 min./45 max.
Service Stations	20 to 30	35 to 50	20 min./35 max.	40 to 50	50 to 60	20 min./35 max.

(4)

Any vertical curve on a driveway shall be flat enough to prevent the dragging of any vehicle undercarriage.

(5)

Should the sidewalk be so close to the curb or a depressed curb driveway as to cause the ramp to be too steep and be likely to cause undercarriage drag, the sidewalk shall be appropriately lowered to provide a suitable ramp gradient.

(6)

The surface of any driveway shall be constructed with a permanent pavement of a type specified by standards set by the Borough Engineer. Such pavement shall extend to the paved portion of the public or private sidewalk.

(g)

Guiderail end treatments, wheel stops and parking lot striping.

Guiderail and appropriate end treatments shall be provided in appropriate locations where required for safety purposes. Guiderails shall be in conformance to NJDOT standards with end treatments approved by the Borough Engineer.

Wheel stops, permanently anchored to the ground, may be required in appropriate locations. Parked vehicles shall not overhang or extend over sidewalk area, unless an additional sidewalk width of 2 1/2 feet is provided to accommodate such overhang.

Parking stalls, driveways and aisles shall be clearly marked and delineated. The approving authority may require that certain areas be maintained for firefighting purposes or other emergency purposes. These areas, as well as other pavement signage, shall be appropriately designated.

(h)

Minimum and maximum grades in parking area. The minimum and maximum parking grades shall be in accordance with the following requirements:

Table 6
Minimum and Maximum Grades of Parking Areas
Use	Maximum Grade (percent)	Minimum Grade (percent)
Parking stalls and service aisles	6	—
Main approach walkways to buildings	4	—
Swales	10	2
Principal circulation aisles	8	—
Driveways; entrance and exit	6*	—*

(*) NOTE: For a distance 100 feet from the street right-of-way line.

(i)

Maintenance of off-street parking and loading area. Every parcel of land used as a public or private off-street parking or loading area shall be maintained in good condition, free of hazards and deterioration. All pavement areas, sidewalks, curbs, drainage facilities, lighting, bumpers, guardrails, markings, signs, landscaping and other improvements shall be maintained in workable, safe and good condition.

(j)

Other off-street parking requirements:

Limitation as to use. All off-street parking areas shall be used solely for the parking of passenger automobiles and no commercial repair work or service of any kind shall be conducted within the parking lot.

Nonavailability. At any time that the required off-street parking facilities cease to be available as required, the certificate of occupancy for the building or buildings built in conjunction with such parking areas shall be canceled and become null and void.

Charges. There shall be no charge made for the use of off-street parking facilities, and no cars other than self-propelled passenger vehicles shall be permitted to use any of the off-street parking facilities herein required and no service of any kind shall be extended to the vehicle occupying such off-street parking facilities except for emergency purposes.

Off-Street Parking Construction.

All off-street parking areas shall be graded and drained so as to dispose of all surface water in a manner so as not to unreasonably impair the surroundings.

All off-street parking areas, aisles and driveways shall be surfaced with asphalt, bituminous or cement binder pavement according to specifications established for this purpose by the Borough Engineer.

§ 25-1014 OFF-SITE AND OFF-TRACT IMPROVEMENTS.

All parking areas and access drives shall be edged by a concrete or Belgian block not exceeding six inches above the paved surface or ground level.

Landscaping in parking and loading areas shall be provided as follows:

Loading areas shall be screened with landscaping, fencing, berms, walls or any combinations thereof and shall not be less than six feet in height. The screening shall be sufficient to obscure the view of parked vehicles, loading platforms and loading activities from any lot line or street line throughout the year.

Parking areas with 20 or greater parking spaces shall be screened from the street with landscaping, fencing or a wall, and interior parking lot landscaping shall be required. Landscaped areas should be located in protected areas such as along walkways, in center islands, or at the end of parking bays and shall be distributed throughout the parking area to mitigate the view of the parked vehicles without interfering with adequate sight distance for vehicles or pedestrians. The landscaping shall consist of hardy, low maintenance varieties of trees, and shrub plantings no higher than three feet.

Parking areas with less than 20 spaces shall be screened from the street with landscaping, fencing or a wall but no interior parking lot landscaping is required.

One shade tree, with a minimum diameter of 2 1/2 inches measured three feet above the ground, shall be provided for every 10 parking spaces. Trees shall be staggered and/or spaced so as not to interfere with driver vision and shall have branches no lower than six feet.

Any plantings which do not live shall be replaced within one year or one season.

Landscaping shall not cast excessive shade on adjacent properties, interfere with existing vegetation, interfere with light fixtures or interfere with adequate sight distance for vehicles or pedestrians.

§ 25-1004 OFF-STREET LOADING.

[Ord. No. 98-6 § 2, Art. X § 15-77; New]

In any district, in connection with every building or buildings, group or part thereof, hereinafter erected, which is to be utilized by industrial and commercial uses or requires the distribution by vehicles of materials or merchandise and for any residential development containing 30 or more dwelling units and for large-scale public and quasi-public uses, there shall be provided and maintained, on the same zone lot with such building, off-street loading spaces in accordance with the requirements of Table 7.

Each such loading space shall not be less than 12 feet in width and 35 feet or more in length, depending upon the functions to be performed. The overall floor to ceiling height or clear height distance shall not be less than 12 feet, which may be increased where required.

Table 7
Off-Street Loading Requirements
Land Use**	Floor Area at Which First Berth Is Required (square feet)	Floor Area At Which Second Berth Is Required* (square feet)
Industrial, manufacturing	5,000	40,000
Laboratory, research or commercial	5,000	40,000
Retail	5,000	20,000
Service establishments	5,000	40,000
Commercial recreation	5,000	100,000
Restaurant	2,000	25,000
Office buildings	5,000	100,000
Funeral home	10,000	100,000
Residential apartment building, including senior housing complexes	10,000	100,000
Institutional, public schools	10,000	100,000
Hospitals, nursing homes, congregate care facilities	10,000	100,000
Auditoriums, arenas	10,000	100,000

NOTES:
(*) An additional berth shall be required for each additional amount of square feet as indicated, and as required between the need for one- and two-berth intervals.
(**) In the case of a multiple-use building, the amount of off-street loading required shall be equal to the sum of the parts, unless same can be demonstrated to be in excess, and shall be subject to determination by the approving authority.

Except for required buffer areas, each such loading space may occupy any required side or rear yard but shall not be located in any required front yard. When adjoining a residential use, institutional use or place of general assembly, a suitably screened or landscaped buffer shall be provided.

Off-street loading spaces shall not be located within any fire prevention zone, within 25 feet of any fire hydrant or within 10 feet of any stairway, doorway, elevator or other general means of entry to and from a building for the general public, nor shall it block, or in any way interfere, with the free flow of pedestrians from any means of ingress or egress nor shall it interfere with the free flow of pedestrians or vehicles. All such loading spaces shall be appropriately indicated by a sign or other visual communication as to the location.

All loading and unloading shall be conducted entirely within the boundaries of the lot concerned, and no vehicle or conveyance shall, in any manner, use public streets, sidewalks or rights-of-way for loading or unloading operations other than ingress or egress to the lot.

§ 25-1005 CURBS.

[Ord. No. 98-6 § 2, Art. X § 15-78]

See § 25-903r for design standards.

§ 25-1006 SIDEWALKS.

[Ord. No. 98-6 § 2, Art. X § 15-79]

Sidewalks shall be installed in locations determined by the approving authority to be in the interest of public safety considering the probable volume of pedestrian traffic, the adjoining street classification, school bus stops, the development's location in relation to other populated areas and the general type of improvement intended. When required, sidewalks should be at least four feet wide and located as approved by the approving authority. Sidewalks shall be placed upon a compacted subgrade overlaid with at least four inches of porous material such as sand or gravel. Concrete sidewalks shall be at least four inches thick, except at points of vehicular crossing where they shall be at least six inches thick, of class A concrete having a twenty-eight-day compressive strength of 4,000 pounds per square inch and shall be air-entrained. Blacktop or sidewalks of other approved materials shall be constructed as approved by the approving authority upon the advice of the Borough Engineer. Where sidewalks cross curbs, curb ramps shall be provided as outlined in § 25-1005, Curbs. Preformed expansion joint material shall be placed at twenty-foot maximum intervals where sidewalks abut curbing or a structure.

§ 25-1007 DRAINAGE.

[Ord. No. 98-6 § 2, Art. X § 15-80; New]

All streets shall be designed to accommodate storm drainage along streets, including the installation of drainage inlets and pipes. Any system shall be adequate to handle all water which originates within the development and beyond, calculated on the basis of maximum potential development as permitted under this chapter. No water shall be diverted as to overload existing drainage structures on other lands without proper and approved provisions being made for taking care of these conditions, including off-tract improvements.

A twenty-five-year storm curve shall be used in computing stormwater runoff.

The pipe size shall be determined by acceptable drainage design procedures but shall not be less than 15 inches in diameter. All storm drains located within municipal rights-of-way shall be reinforced concrete culvert pipe (RCCP).

Drainage inlets shall be located at intervals of not more than 400 feet or such shorter distances as required to prevent the flow of surface water from exceeding 4.0 cubic feet per second at the drainage inlet. Access manholes shall be placed at maximum 300-foot intervals throughout the system and at pipe junctions.

Dished gutters on Borough streets shall be permitted only at intersections involving local streets. Dished gutters shall not be permitted on arterial or collector streets.

Storm drain pipes running longitudinally along streets shall not be located under curbing.

Storm drain pipes shall be the size specified and laid to the exact lines and grades approved by the Municipal Engineer. Specifications for manholes, inlets and storm drains shall follow the 1989 State Highway Specifications as amended.

Grading shall direct drainage away from all buildings, prevent the collection of stormwater in pools and avoid the concentration of stormwater from one lot to another.

Where any development is traversed by a watercourse or drainage ditch, a drainage right-of-way easement shall be provided and dedicated to the Borough of sufficient width to accommodate expected stormwater runoff in the future based upon reasonable growth potential in the Borough. A minimum of 15 feet beyond the bank top on at least one side shall be provided for access to the drainage right-of-way. See § 25-908.

Where storm drain pipes are installed outside of streets, easements or rights-of-way shall be required in accordance with § 25-908.

§ 25-1008 EASEMENTS.

[Ord. No. 98-6 § 2, Art. X § 15-81]

Easements shall be along side and/or rear property lines where possible and shall not be less than 15 feet wide.

All easements shall be dimensioned on the plat and shall be identified as follows: "(insert purpose of easement) easement granted to the Borough of Fairview as provided for in the Fairview Land Use and Development Regulations Ordinance."

§ 25-1009 ENVIRONMENTAL IMPACT REPORT.

[Ord. No. 98-6 § 2, Art. X § 15-82; New]

At the Board's discretion an environmental impact report may be required to accompany preliminary site plans. In the event that any environmental consideration poses immediate or long-term nuisances or threats to the public health, safety and welfare, the approving authority may require such further information and/or additional testimony as it deems necessary to answer related questions prior to taking action on the plat. One purpose is to avoid dissemination of dust, smoke, observable gases, fumes or odors or other atmospheric pollution, objectionable noises, glare, vibration or radiation, and to avoid the threat of or the actual pollution caused by chemical, corrosive, toxic and/or hazardous materials, any of which would violate any local, County, State or Federal regulation, or any of which could be perceived or measurable beyond the property line by either a single discharge or an accumulation of discharges. Where environmental matters such as protecting floodplains, areas susceptible to erosion, vegetation, historic landmarks and site aesthetics may be achieved by redesigning the location of improvements or the method of construction, the approving authority may require those modifications necessary to alleviate the threat. Where environmental matters may pose a threat to public health such as water quantity, water quality, sewage disposal, air quality, noise or glare, the approving authority may require modifications to the plans, construction details, mechanical systems, methods of operations or other remedies, including monitoring programs to overcome the problem(s). If the applicant is unwilling to abide by requests for further information and/or testimony or to abide by any modifications or required methods of operation, recordkeeping and testing designed to eliminate threats to the public health, safety and welfare, the approving authority shall deny the application.

Prior to submitting a preliminary plan, the applicant shall use the Borough's Natural Resource Maps from the Master Plan to present an overview of the natural limitations of the site and to guide the layout of the proposed development. These maps will aid in locating soil types, topography, slopes, surface water, aquifers, depth to water table, floodplains, vegetation, foundation limitations, erosion potential and septic suitability. Little or no text need accompany the data at this stage. It is anticipated that major areas of concern can be identified and agreed upon by use of this generalized data at an early stage in order to avoid development designs that will encroach upon the major environmental problem areas. Where environmentally sensitive areas identified by this general data must be encroached upon, the environmental impact report submitted at the preliminary plat stage can analyze the problem in more detail based on on-site evaluations, but limiting the analysis to smaller areas of concern.

The environmental impact report shall comply with the following unless, as a result of data submitted prior to the preliminary plat, the approving authority shall have waived or modified certain portions of these requirements.

A description of the development specifying what is to be done during construction and operation, how it is to be done, and practical alternate plans to achieve the objective(s), all with the intent of minimizing environmental impacts.

An inventory of the following on-site environmental conditions and an assessment of the probable impact of the development upon them: water supply; water quality; air quality; geology; soils; rock and properties thereof, including erosion capabilities and limitations; floodplain protection; sewage disposal; topography, including slopes in excess of 15%; vegetation protection; wetlands; noise characteristics and levels; land use; site aesthetics; and historic landmarks. Air and water quality shall be described with reference to standards of the Department of Environmental Protection of the State of New Jersey, and soils shall be described with reference to Soil Conservation Service categories and characteristics as they relate to such things as erosion, sewage capability, floodplains and seasonal high water table.

A list and the status of the approvals needed from Federal, State or County agencies, including comments of these governmental agencies.

An evaluation of any adverse environmental impacts which cannot be avoided, including air and water pollution, noise, sedimentation and siltation, increase in Borough services or capital needs and consequences to the Borough tax structure.

A description of steps to be taken to avoid or minimize adverse environmental impacts during construction and operation, including shipping, receiving, storage and the methods of handling the identified quantities of chemical, corrosive, toxic and hazardous materials anticipated in all aspects of the operation, as well as attaching appropriate maps, schedules and other explanatory data.

Notwithstanding the foregoing, the approving authority may waive all or part of an environmental impact report if sufficient evidence is submitted to support a conclusion that the development will have a slight or negligible environmental impact or that the complete report need not be prepared to evaluate the environmental impact of the development.

§ 25-1010 FIRE PROTECTION.

[Ord. No. 98-6 § 2, Art. X § 15-83; New]

Whenever a central water supply system exists, provision shall be made of fire hydrants along streets and/or on the walls of nonresidential buildings as approved by the servicing Fire Department or Municipal Engineer and in accordance with the Insurance Services Office of New Jersey. The midpoint of all lots served by a central water supply shall be within 500 feet of a functioning fire hydrant. Hydrants shall have fire hose threads conforming to the fire company equipment with no less than 2.5 inch pumper nozzles. Hydrants shall be set plumb with nozzles 18 inches above grade. The system shall be pressure-tested to assure its capability of sustaining the required pressure at each hydrant. The system shall be designed to provide for a looped system converting to existing or other proposed watermain.

Where streams or ponds exist on the site, or are proposed, and there is no central water supply, easements and facilities shall be provided to draft water for fire-fighting purposes, including access suitable for fire-fighting equipment, designed and constructed in accordance with the Insurance Services Office of New Jersey.

§ 25-1011 FLOODPLAIN REGULATIONS.

[Ord. No. 98-6 § 2, Art. X § 15-84]

Floodplains shall be preserved and not be built upon. Where a property containing a floodplain is proposed for development or other improvements, no proposed structures shall be located within the 100-year floodplain. The uses permitted in the 100-year floodplain shall be limited to general farming, overflow parking or areas serving the peak parking and loading demands, lawns and yard space, gardens, detention basins, ponds and open space/recreation areas not requiring structures. No septic systems shall be located in the 100-year floodplain. The 100-year floodplain shall be at least as designated on the streams identified on the Floodway Maps prepared by the National Flood Insurance Program, or such broader areas on those streams as might result from an on-site evaluation. On streams not identified by the National Flood Insurance Program, the 100-year floodplain shall be as delineated by a developer's engineer and approved by the Borough Engineer.

The purposes shall be to:

Prevent the encroachment of development into flood hazard areas in order to protect human life and health.

Implement the rules and regulations of the New Jersey Department of Environmental Protection.

Guide construction, regrading and other encroachments that might otherwise occur in flood hazard areas to other locations outside flood hazard areas through cluster zoning, transfer of development credits, and other planned developments.

Prevent pollution during low or high water periods by eliminating unsanitary or dangerous substances in flood hazard areas.

Minimize public expenditures for flood control projects, repairs to public facilities and utility services and rescue and relief efforts.

Minimize disruption in homes, businesses and places of employment.

Give better assurance that buyers are notified of the limits of properties in a flood hazard area and that those who occupy properties in these areas assume responsibility for their actions.

§ 25-1012 LIGHTING.

[Ord. No. 98-6 § 2, Art. X § 15-85]

A lighting plan prepared by a qualified individual shall be provided with site plan applications.

The intensity, shielding, direction and reflecting of lighting shall be subject to site plan approval by the approving authority.

All parking areas, walkways, building entrances, loading areas and driveways required for nonresidential or multifamily uses shall be adequately illuminated during the hours of operation which occur after sunset. Any adjacent residential zone or use shall be shielded from the glare of illumination from site lighting and automobile headlights.

The light intensity at ground level shall average 0.5 footcandles; however, variations are permitted depending upon the intensity of the use. The light intensity shall not exceed 0.3 footcandles along any property line and shall be so arranged and shielded to reflect the light away from adjoining streets or properties.

The lighting plan shall indicate the proposed light intensity (including existing fixtures to remain) at ground level where 0.5 footcandles occur. Manufacturer's lighting detail and specifications including footcandle distributions shall be provided. All lights shall be concealed source nonglare lighting and shall be focused downward so that the direct source of light is not visible from adjoining streets or properties. The minimum footcandle in the areas used by the public shall be 0.5; the maximum footcandle is 1.0.

The mounting height of lighting fixtures shall be not more than 20 feet or the height of the building, whichever is less, measured from the ground level to the center line of the light source.

Shade trees shall be planted a minimum of 10 feet from any freestanding light fixture.

No lighting source shall be visible from windows, streets and driveways, nor shall lighting shine directly into or reflect into windows or onto streets and driveways to interfere with driver vision.

No lighting shall be of a rotating, pulsating or other intermittent frequency.

§ 25-1013 NATURAL FEATURES.

[Ord. No. 98-6, § 2, Art. X § 15-86]

Natural features, such as trees, viewsheds, and slopes, shall be preserved whenever possible. On individual lots, care shall be taken to preserve selected trees to enhance soil stability and landscape treatment.

[Ord. No. 98-6 § 2, Art. X § 15-87]

Before final approval the approving authority may require the payment of the developer's pro rata share of the following off-site and off-tract improvements: street improvements, water system, sewerage, drainage facilities and easements therefor.

Essential off-site and off-tract improvements may be required to be installed or a performance guaranty furnished in lieu thereof, with the total cost borne by the developer.

Where a development has no direct access to an improved street or public or private central water supply or central sanitary sewer and does not qualify for individual sewage disposal systems, the approving authority may nevertheless grant final approval if the developer shall acquire and improve such street between the development and an existing improved street and, in the case of water/sewer system(s), if the developer shall acquire and improve such water and sanitary sewer connections between the development and existing facilities as approved by the approving authority, Governing Body and serving utility company.

Where drainage waters are diverted from the development into other drainage systems or onto other lands or streets and they are not adequate to accommodate the additional waters, the approving authority may grant final approval if the developer shall acquire, improve and dedicate to the Borough such enlarged, additional or new drainage facilities as approved by the approving authority and Governing Body.

Such off-site and off-tract improvements shall be subject to the design standards of this chapter. In lieu of the developer's performing such off-site and off-tract work, the developer may request and the Governing Body may enter into an agreement for such work to be performed by the Borough or its contractors at the cost of the developer.

Where the approving authority determines that off-site and off-tract improvements are essential to the development and the developer does not consent to the improvements, the application shall be denied, without prejudice, to a future application at such time as the conditions no longer apply.

Advisable Off-Site and Off-Tract Improvement. Where the approving authority determines that off-site and off-tract improvements would be advisable, although not essential and the improvements would promote the objectives of this chapter and can be most appropriately accomplished in connection with the development, and particularly where the off-site and off-tract improvements would be required to be made as a local improvement by the Borough with the costs thereof to be assessed against all properties specially benefited thereby, including the property of the developer, the following provisions shall apply.

During the processing of the application, the approving authority shall refer its recommendations for off-site and off-tract improvements to the Governing Body.

If the Governing Body concurs, the Municipal Engineer or other authority retained by the Borough shall determine the nature of the off-site and off-tract improvements, including:

The needs created by the applicant's proposed development.

The then-existing needs in the area, notwithstanding any work of the applicant.

The Municipal Engineer or other authority shall estimate and report the costs of such work, including all costs to be in any local improvement ordinance and those to be assessed to the developer, and including costs for construction, engineering, any easement or right-of-way acquisition, legal work, advertising, contingencies, bonding and assessments.

Based upon the above report and the recommendations of the approving authority, the Governing Body shall determine whether to undertake such off-site and off-tract improvements as a local improvement.

If the Governing Body will not adopt such ordinance, the final development shall be designed accordingly, and the approving authority shall proceed on that basis.

If the determination shall be to adopt such local improvements ordinance, the Governing Body shall proceed in the following manner:

If sufficient funds are available for the initial appropriation, the Governing Body may appropriate such funds and adopt such ordinance. All subsequent proceedings for the making and assessment of the cost of the off-site and off-tract improvements shall be in accordance with such ordinance.

If sufficient funds are not available for the initial appropriation, the Governing Body may determine the anticipated amount that the lands of the applicant would be expected to be assessed.

The amount determined by the Governing Body shall then be deposited by the applicant with the Borough Treasurer prior to final approval and prior introduction of such local improvement ordinance.

Such deposit shall be made concurrent with an agreement between the applicant and the Borough concerning the uses of the deposit, which shall include the following stipulations: that the funds shall be used by the Borough solely for the construction of such off-site and off-tract improvements as specified in the agreement and for the other expenses incidental thereto and the acquisition of any easements or rights-of-way in connection therewith; that such deposit may be appropriated by the Borough, with other funds of the Borough, toward the accomplishment of such purposes and may be commingled with other appropriated funds and expended by the Borough within a specified time agreed upon by the applicant, the funds shall be returned to the applicant; that, upon completion of the work by the Borough or its contractors, the properties specially benefited by such improvements shall be assessed as provided by law, including the property of applicant; and that the applicant's deposit shall be credited against the assessment made upon the applicant's property, whether or not the applicant is then the owner thereof, and if such deposit was less than the amount ultimately assessed against such property, then the owner(s) of the property shall pay the difference between the deposit, the amount assessed, and the excess shall be refunded to the applicant, without interest.

§ 25-1016 SHADE TREES, PLANTING STRIPS AND LANDSCAPING.

Where the off-site and off-tract improvements are found by the approving authority to be advisable and important to the sound development of the site, although the off-site and off-tract improvements may not be found to be the type of essential off-site and off-tract improvements as defined above, but the developer is unwilling to make such deposit as specified above, then there shall be no final approval until funds become available for the initial appropriation required to adopt the local improvement ordinance.

The determination of the Governing Body whether or not to proceed toward the adoption of a local improvement ordinance shall be made within 30 days after the referral by the approving authority unless such time shall be extended with the consent of the applicant. If the determination is not made within the designated period, the approving authority may proceed as if the Governing Body had determined that it would not adopt such local improvement ordinance.

§ 25-1015 PUBLIC UTILITIES.

[Ord. No. 98-6 § 2, Art. X § 15-88]

All public services shall be connected to approved public utilities systems where they exist.

The distribution supply lines and service connections shall be installed underground, except that lots which abut streets with existing overhead electric or telephone distribution supply lines and service connections may be supplied with electric and telephone service from those overhead lines, but the service connections shall be installed underground. In the case of existing overhead utilities, should a road widening or an extension of service or other such condition occur as a result of the development and necessitate the replacement, relocation or extension of such utilities, such replacement, relocation or extension shall be underground.

The developer shall submit to the approving authority, prior to final approval, a written instrument from each serving utility indicating full compliance or intended full compliance with the provisions of this section.

Where natural foliage is not sufficient to provide year round screening of any utility apparatus appearing above the surface of the ground, other than utility poles, the applicant shall provide sufficient live screening to conceal such apparatus year round.

On any lot where soil conditions, rock formations, woods or other special conditions exist and the developer deems it a hardship to comply with the provisions of this section, the developer may apply to the approving authority for an exception from the terms of this section. Where overhead lines are permitted as the exception, the alignments and pole locations shall be routed to avoid locations along horizons, avoid the clearing of swaths through treed areas by selective cutting and a staggered alignment, by planting trees in open areas at key locations to minimize the views of the poles and alignments, by following rear lot lines and other interior locations and similar design and location considerations to lessen the visual impact of overhead.

[Ord. No. 98-6 § 2, Art. X § 15-89]

Shade trees shall be provided in all site plans where deemed appropriate by the Planning Board. All shade trees shall have a minimum diameter of 2.5 inches measured three feet above the ground and shall be of a species approved by the approving authority. Trees shall be planted 40 to 60 feet apart and parallel to, but no more than 20 feet from, the curbline and shall be balled and burlapped, nursery grown, free from insects and disease and true species and variety. Stripping trees from a lot or filling around trees on a lot shall not be permitted unless it can be shown that grading requirements necessitate removal of trees, in which case those lots shall be replanted with trees to reestablish the character of the area and to conform to adjacent lots. Dead or dying trees shall be replaced by the developer during the next recommended planting season. Parking lots shall be planted as required in § 25-1003, Off-Street Parking Requirements.

All trees shall have a minimum diameter of 2 1/2 inches measured three feet above the ground and shall be of a species approved by the approving authority. Trees shall be planted 40 to 60 feet apart and parallel to, but no more than 20 feet from, the curbline and shall be balled and burlapped, nursery grown, free from insects and disease and true species and variety.

A landscape plan prepared by a certified landscape architect, certified by the New Jersey Board of Landscape Architects, or other qualified individual, shall be submitted with each site plan application. Landscaping shall be provided to promote a desirable visual environment, screen parking and loading areas, provide windbreaks for winter winds and summer cooling for buildings, streets and parking, and to mitigate adverse visual impacts. The landscape plan shall provide the following information:

Existing wooded areas, rock outcroppings and existing and proposed water bodies;

Existing and proposed topography and location of all landscaped berms;

Location, species and sizes of all proposed shade trees, ornamental trees, evergreen trees and areas for lawns or any other ground cover;

A plant schedule indicating botanical name, common name, size at time of planting, quantity and any special remarks for all plant material proposed;

Planting and construction details and specifications.

§ 25-1017 SIGHT TRIANGLES.

[Ord. No. 98-6 § 2, Art. X § 15-90]

Sight triangles shall be required at each quadrant of an intersection of streets, and streets and driveways. The area within sight triangles shall be either dedicated as part of the street right-of-way or maintained as part of a lot adjoining the street and set aside on any subdivision or site plan as a sight triangle easement. Within a sight triangle, no grading, planting or structure shall be erected or maintained more than 36 inches above the center line grade of either intersecting street or driveway or lower than eight feet above their center lines, excluding street name signs and official traffic regulation signs. Where any street or driveway intersection involves earth banks or vegetation, including trees, the developer shall trim and grade to provide the sight triangle. The sight triangle is that area outside the right-of-way bounded by the intersecting street lines and a straight line which connects sight points located on each of the two intersecting street center lines; arterial streets at 300 feet, collector streets at 200 feet and local streets at 90 feet. Where the intersecting streets are both arterial and one collector, two overlapping sight triangles shall be required, formed by connecting the sight points noted above with a sight point 90 feet on the intersecting street. Any development requiring site plan approval shall provide sight triangles at each driveway, with the driveway classified as a local street for purposes of establishing distances. The classifications of existing and proposed streets shall be those shown on the adopted Master Plan or as designated by the approving authority where a new street is not included on the Master Plan. A sight triangle easement shall be expressed on the plat as follows: "Sight triangle easement subject to grading, planting and construction restrictions as provided for in the Fairview Land Use and Development Regulations Ordinance." Portions of a lot set aside for the sight triangle may be calculated in determining the lot area and minimum setbacks required by the zoning provisions.

§ 25-1018 SOIL EROSION AND SEDIMENT CONTROL.

[Ord. No. 98-6 § 2, Art. X § 15-91]

No topsoil shall be removed from the site or used as spoil. Topsoil moved during the course of construction shall be redistributed so as to provide at least six inches of cover to all areas of the subdivision and shall be stabilized by seeding or planting.

All applications for site plan approval shall be designed in accordance with the requirements of the Bergen County Soil Conservation District.

§ 25-1019 STORMWATER RUNOFF.

[Ord. No. 98-6 § 2, Art. X § 15-92]

All developments shall incorporate on-site stormwater facilities that will encourage the recharging of underground aquifers and/or the slowing down of the rate stormwater leaves the site.

Where the amount of runoff determined by the Municipal Engineer is sufficient to justify detention of peak flow, one or more detention basins shall be required. Each detention basin shall have a capacity to accept all surface water directed to it from a 100-year storm event with outlets to permit complete draining of the maximum capacity of the detention basin in not more than 36 hours.

Developments may incorporate other on-site stormwater detention or impoundment facilities in the following manner:

Swales to Retard Water Runoff. Water velocity shall not exceed three feet per second. The water may be directed to impact-still basins to evaporate and percolate. The swales shall be seeded and maintained in lawn area as appropriate.

Impoundment/detention basins along streams that maintain steady flows of water may be constructed, provided that they meet the standards and have the approval of the New Jersey Department of Environmental Protection.

Detention of stormwater on roof surfaces may be designed.

Where storm drains are installed outside streets, easements or rights-of-way shall be required in accordance with § 25-1008, Easements. Stormwater management plans shall be designed and prepared in accordance with the latest NJDEP guidelines for stormwater management.

§ 25-1020 TOPSOIL REDISTRIBUTION.

[Ord. No. 98-6 § 2, Art. X § 15-93]

Topsoil available at the site and moved during the course of construction shall be redistributed to all areas uncovered in the course of construction. Whenever sufficient topsoil is not available at the site, additional topsoil shall be obtained and distributed in such a manner as to provide a cover of at least six inches of topsoil or other approved cover to prevent soil erosion on the areas uncovered during the course of construction or excavation. No topsoil shall be removed from the site of the development or used as spoil.

§ 25-1021 WATER SUPPLY.

[Ord. No. 98-6 § 2, Art. X § 15-94]

Where water is accessible from a servicing utility, the developer shall arrange for the construction of water mains in such a manner as to make adequate water service available to each lot, dwelling unit or use. The system shall be designed with adequate capacity and sustained pressure for present and probable future development.

Where public water is not available, potable water supply shall be provided to each lot or dwelling unit by wells from groundwater supply. Such wells shall be designed in accordance with the requirements and standards of the Borough and/or State agency having jurisdiction.

Where water distribution systems are installed outside streets, easements or rights-of-way shall be required in accordance with § 25-1008, Easements.

Where no municipal consent for a public utility franchise for water has been granted, upon completion of the water plant and distribution system, these public facilities shall, at the option of the Borough, be transferred to the Borough.

§ 25-1022 RECYCLING.

[Ord. No. 98-6 § 2, Art. X § 15-95]

There shall be included in any new multi-family housing development that requires subdivision or site plan approval an indoor or outdoor recycling area for the collection and storage of residentially-generated recyclable materials. The dimensions of the recycling area shall be sufficient to accommodate recycling bins or containers which are of adequate size and number, and which are consistent with anticipated usage and with current methods of collection in the area in which the project is located. The dimensions of the recycling area and the bins or containers shall be determined in consultation with the Municipal Recycling Coordinator, and shall be consistent with the district recycling plan adopted pursuant to section 3 of the P.L. 1987, c. 102 (N.J.S.A. 13:1E-99.13) and any applicable requirements of the Municipal Master Plan, adopted pursuant to section 26 of P.L. 1987, c. 102;

The recycling area shall be conveniently located for the residential disposition of source separated recyclable materials, preferably near, but clearly separated from, a refuse dumpster;

Recycling areas shall be well lit, and shall be safely and easily accessible by recycling personnel and vehicles. Collection vehicles shall be able to access the recycling area without interference from parked cars or other obstacles. Reasonable measures shall be taken to protect the recycling area, and the bins or containers placed therein, against theft of recyclable materials, bins or containers;

The recycling area or the bins or containers placed therein shall be designed so as to provide protection against adverse environmental conditions which might render the collected materials unmarketable. Any bins or containers which are used for the collection of recyclable paper or cardboard, and which are located in an outdoor recycling area, shall be equipped with a lid, or otherwise covered, so as to keep the paper or cardboard dry;

Signs clearly identifying the recycling area and the materials accepted therein shall be posted adjacent to all points of access to the recycling area. Individual bins or containers shall be equipped with signs indicating the materials to be placed therein;

Landscaping and/or fencing shall be provided around any outdoor recycling area and shall be developed in an aesthetically pleasing manner.

§ 25-1023 ELECTRIC VEHICLE SUPPLY/SERVICE EQUIPMENT.

[Added 12-21-2021 by Ord. No. 21-23]

Purpose. The purpose of this section is to promote and encourage the use of electric vehicles by requiring the safe and efficient installation of EVSE and make-ready parking spaces through municipal parking regulations and other standards. EVSE and make-ready parking spaces will support the state's transition to an electric transportation sector, reducing automobile air pollution, greenhouse gas emissions, and stormwater runoff contaminants. The goals are to:

Provide adequate and convenient EVSE and make-ready parking spaces to serve the needs of the traveling public.

Provide opportunities for residents to have safe and efficient personal EVSE located at or near their place of residence.

Provide the opportunity for nonresidential uses to supply EVSE to their customers and employees.

Create standard criteria to encourage and promote safe, efficient, and cost-effective electric vehicle charging opportunities in all zones and settings for convenience of service to those that use electric vehicles.

Definitions. As used in this section, the following terms shall have the meanings indicated:

CERTIFICATE OF OCCUPANCY

The certificate provided for in N.J.A.C. 5:23-2, indicating that the construction authorized by the construction permit has been completed in accordance with the construction permit, the Act and the regulations. See State Uniform Construction Code Act, P.L. 1975, c. 217 (N.J.S.A. 52:27D-119 et seq.) and regulations adopted pursuant thereto.

CHARGING LEVEL

The amount of voltage provided to charge an electric vehicle varies depending on the type of EVSE as follows:

Level 1 operates on a fifteen- to twenty-amp breaker on a 120-volt AC circuit.

Level 2 operates on a forty- to 100-amp breaker on a 208- or 240-volt AC circuit.

Direct-current fast charger (DCFC) operates on a sixty-amp or higher breaker on a 480-volt or higher three-phase circuit with special grounding equipment. DCFC stations can also be referred to as "rapid charging stations" that are typically characterized by industrial-grade electrical outlets that allow for faster recharging of electric vehicles.

ELECTRIC VEHICLE

Any vehicle that is licensed and registered for operation on public and private highways, roads, and streets; and operates either partially or exclusively using an electric motor powered by an externally charged on-board battery.

ELECTRIC VEHICLE SUPPLY/SERVICE EQUIPMENT or EVSE

The equipment, including the cables, cords, conductors, connectors, couplers, enclosures, attachment plugs, power outlets, power electronics, transformer, switchgear, switches and controls, network interfaces, point-of-sale equipment, and associated apparatus designed and used for the purpose of transferring energy from the electric supply system to a plug-in electric vehicle. EVSE may deliver either alternating-current or, consistent with fast charging equipment standards, direct-current electricity. "EVSE" is synonymous with "electric vehicle charging station."

MAKE-READY PARKING SPACE

The prewiring of electrical infrastructure at a parking space, or set of parking spaces, to facilitate easy and cost-efficient future installation of electric vehicle supply equipment or electric vehicle service equipment, including, but not limited to, Level Two EVSE and direct-current fast chargers. Make-ready includes expenses related to service panels, junction boxes, conduit, wiring, and other components necessary to make a particular location able to accommodate electric vehicle supply equipment or electric vehicle service equipment on a plug-and-play basis. "Make-ready" is synonymous with the term "charger ready," as used in P.L. 2019, c. 362 (N.J.S.A. 48:25-1 et seq.).

PRIVATE EVSE

EVSE that has restricted access to specific users (e.g., single- and two-family homes, executive parking fleet parking with no access to the general public).

PUBLICLY ACCESSIBLE EVSE

EVSE that is publicly available (e.g., park and ride, public parking lots and garages, on-street parking, shopping center parking, nonreserved parking in multifamily parking lots, etc.).

Approvals and permits.

An application for development submitted solely for the installation of EVSE or make-ready parking spaces shall be considered a permitted accessory use and permitted accessory structure in all zoning or use districts and shall not require a variance pursuant to N.J.S.A. 40:55D-70.

EVSE and make-ready parking spaces installed pursuant to Subsection d below in development applications that are subject to site plan approval are considered a permitted accessory use as described in Subsection c1 above.

All EVSE and make-ready parking spaces shall be subject to applicable local and/or Department of Community Affairs permit and inspection requirements.

The zoning officer shall enforce all signage and installation requirements described in this section. Failure to meet the requirements in this section shall be subject to the same enforcement and penalty provisions as other violations of Borough of FAIRVIEW FAIRVIEW's land use regulations.

An application for development for the installation of EVSE or make-ready spaces at an existing gasoline service station, an existing retail establishment, or any other existing building shall not be subject to site plan or other land use board review, shall not require variance relief pursuant to N.J.S.A. 40:55D-1 et seq. or any other law, rule, or regulation, and shall be approved through the issuance of a zoning permit by the administrative officer, provided the application meets the following requirements:

The proposed installation does not violate bulk requirements applicable to the property or the conditions of the original final approval of the site plan or subsequent approvals for the existing gasoline service station, retail establishment, or other existing building;

All other conditions of prior approvals for the gasoline service station, the existing retail establishment, or any other existing building continue to be met; and

The proposed installation complies with the construction codes adopted in or promulgated pursuant to the State Uniform Construction Code Act, P.L. 1975, c. 217 (N.J.S.A. 52:27D-119 et seq.), any safety standards concerning the installation, and any state rule or regulation concerning electric vehicle charging stations.

An application pursuant to Subsection c5 above shall be deemed complete if:

The application, including the permit fee and all necessary documentation, is determined to be complete;

A notice of incompleteness is not provided within 20 days after the filing of the application; or

A one-time written correction notice is not issued by the Zoning Officer within 20 days after filing of the application detailing all deficiencies in the application and identifying any additional information explicitly necessary to complete a review of the permit application.

EVSE and make-ready parking spaces installed at a gasoline service station, an existing retail establishment, or any other existing building shall be subject to applicable local and/or Department of Community Affairs inspection requirements.

A permitting application solely for the installation of electric vehicle supply equipment permitted as an accessory use shall not be subject to review based on parking requirements.

Requirements for new installation of EVSE and make-ready parking spaces.

As a condition of preliminary site plan approval, for each application involving a multiple dwelling with five or more units of dwelling space, which shall include a multiple dwelling that is held under a condominium or cooperative form of ownership, a mutual housing corporation, or a mixed-use development, the developer or owner, as applicable, shall:

Prepare as make-ready parking spaces at least 15% of the required off-street parking spaces, and install EVSE in at least 1/3 of the 15% of make-ready parking spaces.

Within three years following the date of the issuance of the certificate of occupancy, install EVSE in an additional 1/3 of the original 15% of make-ready parking spaces.

Within six years following the date of the issuance of the certificate of occupancy, install EVSE in the final 1/3 of the original 15% of make-ready parking spaces.

Throughout the installation of EVSE in the make-ready parking spaces, at least 5% of the electric vehicle supply equipment shall be accessible for people with disabilities.

Nothing in this subsection shall be construed to restrict the ability to install electric vehicle supply equipment or make-ready parking spaces at a faster or more expansive rate than as required above.

As a condition of preliminary site plan approval, each application involving a parking lot or garage not covered in Subsection d1 above shall:

Install at least one make-ready parking space if there will be 50 or fewer off-street parking spaces.

Install at least two make-ready parking spaces if there will be 51 to 75 off-street parking spaces.

Install at least three make-ready parking spaces if there will be 76 to 100 off-street parking spaces.

Install at least four make-ready parking spaces, at least one of which shall be accessible for people with disabilities, if there will be 101 to 150 off-street parking spaces.

Install at least 4% of the total parking spaces as make-ready parking spaces, at least 5% of which shall be accessible for people with disabilities, if there will be more than 150 off-street parking spaces.

(f)

In lieu of installing make-ready parking spaces, a parking lot or garage may install EVSE to satisfy the requirements of this subsection.

(g)

(h)

Notwithstanding the provisions of Subsection D2(e) above, a retailer that provides 25 or fewer off-street parking spaces or the developer or owner of a single-family home shall not be required to provide or install any electric vehicle supply equipment or make-ready parking spaces.

Minimum parking requirements.

All parking spaces with EVSE and make-ready equipment shall be included in the calculation of minimum required parking spaces, pursuant to the Fairview Zoning Ordinance.

A parking space prepared with EVSE or make-ready equipment shall count as at least two parking spaces for the purpose of complying with a minimum parking space requirement. This shall result in a reduction of no more than 10% of the total required parking.

All parking space calculations for EVSE and make-ready equipment shall be rounded up to the next full parking space.

Additional installation of EVSE and make-ready parking spaces above what is required in Subsection d above may be encouraged, but shall not be required in development projects.

Reasonable standards for all new EVSE and make-ready parking spaces.

Location and layout of EVSE and make-ready parking spaces is expected to vary based on the design and use of the primary parking area. It is expected flexibility will be required to provide the most convenient and functional service to users. Standards and criteria should be considered guidelines and flexibility should be allowed when alternatives can better achieve objectives for provision of this service.

Installation:

Installation of EVSE and make-ready parking spaces shall meet the electrical subcode of the Uniform Construction Code, N.J.A.C. 5:23-3.16.

Each EVSE or make-ready parking space that is not accessible for people with disabilities shall be not less than nine feet wide or 18 feet in length. Exceptions may be made for existing parking spaces or parking spaces that were part of an application that received prior site plan approval.

To the extent practical, the location of accessible parking spaces for people with disabilities with EVSE and make-ready equipment shall comply with the general accessibility requirements of the Uniform Construction Code, N.J.A.C. 5:23, and other applicable accessibility standards.

Each EVSE or make-ready parking space that is accessible for people with disabilities shall comply with the sizing of accessible parking space requirements in the Uniform Construction Code, N.J.A.C. 5:23, and other applicable accessibility standards.

EVSE parking:

Publicly accessible EVSE shall be reserved for parking and charging electric vehicles only. Electric vehicles shall be connected to the EVSE. It shall be noted that the use of time limits is optional and shall be determined by the owner.

Electric vehicles may be parked in any parking space designated for parking, subject to the restrictions that would apply to any other vehicle that would park in that space.

Public parking. Pursuant to N.J.S.A. 40:48-2, publicly accessible EVSE parking spaces shall be monitored by the municipality's Police Department and enforced in the same manner as any other parking. It shall be a violation of this section to park or stand a nonelectric vehicle in such a space, or to park an electric vehicle in such a space when it is not connected to the EVSE. Any nonelectric vehicle parked or standing in a EVSE parking space or any electric vehicle parked and not connected to the EVSE shall be subject to fine and/or impoundment of the offending vehicle as described in the general penalty provisions of this municipal ordinance. Signage indicating the penalties for violations shall comply with Subsection f5 below. Any vehicle parked in such a space shall make the appropriate payment for the space and observe the time limit for the underlying parking area, if applicable.

Private parking. The use of EVSE shall be monitored by the property owner or designee.

Safety.

Each publicly accessible EVSE shall be located at a parking space that is designated for electric vehicles only and identified by green painted pavement and/or curb markings, a green painted charging pictograph symbol, and appropriate signage pursuant to Subsection f5 below.

Where EVSE is installed, adequate site lighting and landscaping shall be provided in accordance with the Borough of Fairview's ordinances and regulations.

Adequate EVSE protection such as concrete-filled steel bollards shall be used for publicly accessible EVSE. Nonmountable curbing may be used in lieu of bollards if the EVSE is setback a minimum of 24 inches from the face of the curb. Any stand-alone EVSE bollards should be three feet to four feet high with concrete footings placed to protect the EVSE from accidental impact and to prevent damage from equipment used for snow removal.

EVSE outlets and connector devices shall be no less than 36 inches and no higher than 48 inches from the ground or pavement surface where mounted, and shall contain a cord management system as described in Subsection f4(e) below. Equipment mounted on pedestals, lighting posts, bollards, or other devices shall be designated and located as to not impede pedestrian travel, create trip hazards on sidewalks, or impede snow removal.

Each EVSE shall incorporate a cord management system or method to minimize the potential for cable entanglement, user injury, or connector damage. Cords shall be retractable or have a place to hang the connector and cord a safe and sufficient distance above the ground or pavement surface. Any cords connecting the charger to a vehicle shall be configured so that they do not cross a driveway, sidewalk, or passenger unloading area.

(f)

Where EVSE is provided within a pedestrian circulation area, such as a sidewalk or other accessible route to a building entrance, the EVSE shall be located so as not to interfere with accessibility requirements of the Uniform Construction Code, N.J.A.C. 5:23, and other applicable accessibility standards.

(g)

Publicly accessible EVSEs shall be maintained in all respects, including the functioning of the equipment. A twenty-four-hour on-call contact shall be provided on the equipment for reporting problems with the equipment or access to it. To allow for maintenance and notification, the Borough of Fairview shall require the owners/designee of publicly accessible EVSE to provide information on the EVSE's geographic location, date of installation, equipment type and model, and owner contact information.

Signs.

Publicly accessible EVSE shall have posted regulatory signs, as identified in this section, allowing only charging electric vehicles to park in such spaces. For purposes of this section, "charging" means that an electric vehicle is parked at an EVSE and is connected to the EVSE. If time limits or vehicle removal provisions are to be enforced, regulatory signs, including parking restrictions, shall be installed immediately adjacent to, and visible from the EVSE. For private EVSE, installation of signs and sign text is at the discretion of the owner.

All regulatory signs shall comply with visibility, legibility, size, shape, color, and reflectivity requirements contained within the Federal Manual on Uniform Traffic Control Devices as published by the Federal Highway Administration.

Wayfinding or directional signs, if necessary, shall be permitting at appropriate decision points to effectively guide motorists to the EVSE parking space(s). Wayfinding or directional signage shall be placed in a manner that shall not interfere with any parking space, drive lane, or exit and shall comply with Subsection f5(b) above.

In addition to the signage described above, the following information shall be available on the EVSE or posted at or adjacent to all publicly accessible EVSE parking spaces:

Hour of operations and/or time limits if time limits or tow-away provisions are to be enforced by the municipality or owner/designee;

Usage fees and parking fees, if applicable; and

Contact information (telephone number) for reporting when the equipment is not operating or other problems.

Usage fees.

For publicly accessible municipal EVSE: In addition to any parking fees, the fee to use parking spaces within the municipality identified as EVSE spaces shall be paid for each hour that the electric vehicle is connected to the EVSE.

This fee may be amended by a resolution adopted by the governing body.