Project specific data. The following minimum information, including its metadata, which is "data (information) that provides information about other data," must be provided as outlined for each type of project referenced.
Striping, traffic signs, traffic signals, MUTCD sign type, sign text, sign support type, legend.
Contour lines and contour elevations, light detection and ranging (LiDAR), digital elevation model (DEM) (The dates of flights range can vary depending on your given location. Be sure to review the metadata file to verify this information before using this dataset. The general file format is *.tif with supporting shapefiles).
Street grade, top of curb elevations, gutter elevations.
Right-of-way lines, street name(s), sign locations, center line locations, median island locations, sidewalk locations, retaining wall locations, sound barrier locations, driveway/gutter line locations, curblines, handicap ramp locations, traffic light locations, tree/shrub locations, bridge/culvert name/code, water/road spanning over, bridge/culvert construction type, bridge/culvert year built, guiderail location, guiderail side of road, end cap type, sign post type, sign post type, bus stop location, legend.
Water body locations, stream/drainage ditch locations, park locations, railroad locations, bike path/trail locations, well locations, aboveground storage tank locations, legend.
Boundary line locations, monument locations, center line locations, lot/parcel boundaries, easement locations, control lines, legend.
Transmission line locations, pole locations, transformer locations, lateral locations, meter locations, valve locations, cleanout locations, catch basin locations, culvert/culvert fencing locations, water line locations, water material, water pipe size, sanitary sewer line locations, sanitary sewer material, sanitary sewer pipe size, stormwater line location, stormwater drainage facility locations, sanitary sewer service area, pipe size, pipe material, upstream elevation, downstream elevation, slope from manhole-to manhole, manhole locations, manhole install date, invert elevation, invert, rim elevation, cover type, manhole type, pump station location, pump type, pump elevation, pump rotation, stormwater inlets, inlet type, inlet elevation, control valve location, control valve rotation, control valve diameter, control valve type, curb stop location, curb stop valve rotation, curb stop valve diameter, curb stop valve type, hydrant locations, hydrant install date, hydrant manufacturer, hydrant operable Y/N, hydrant owned by, water lateral location, water lateral material, water lateral pipe size, sanitary lateral location, sanitary lateral material, sanitary lateral pipe size, service connection location, valve location, valve type, legend.
Rail station locations, rail service lines, rail service type, station name.
All digital data will require an accompanying metadata (text) file. Metadata should be submitted in federal geospatial data convention (FGDC), which is the federal data standard. This file will be in ACSII file (.txt extension) format using the same naming convention as the individual project file being submitted. This file will contain the following minimum information:
a. 
Project identifier (e.g., subdivision name, permit ID, easement location).
b. 
Electronic file name and format.
c. 
Draft date.
d. 
Date.
e. 
Contact name.
f. 
Contact phone.
g. 
Contact email.
h. 
Spatial location [block and lot number(s), street names, addresses, etc.].
i. 
Short project description.
j. 
Method information (explanation of assumptions used to determine subdivision or easement boundary lines. Indicate whether boundary lines reflect actual or legal lengths.).
A data custodian shall be appointed for the Borough of Roseland. The custodian shall verify receipt of required digital files, forwarding one copy to the Municipal Clerk for archival and the other copy to the appropriate municipal body or official for approval/incorporation.