A.
Approval required. Prior to installation of any new fire alarm or smoke detection system, or the alteration of an existing system in a commercial or public building, plans approved by the Department of Safety and Professional Services shall be submitted to the Fire Department or its designee for review and approval. In the event no state approval is required, the Department will require local approval.
(1)
Standards. All fire alarm or detection systems shall comply with that of the National Fire Alarm and Signaling Code, and any of its referenced standards (most current State of Wisconsin adopted edition at time of modification or installation). All systems must be monitored by an outside monitoring service unless twenty-four-hour operations are conducted and then only if approved, in writing, by the Fire Chief.
(2)
Submittals. Two digital copies (one to the Fire Marshal and the other to Commercial Building Inspector) of the plans, specifications, and calculations shall be submitted for review. Approved plans shall be stamped "Conditionally Approved," with the date and signature of the approving person. One copy will be kept on file by the Fire Department. Full responsibility for the accuracy of the plans and calculations is the sole responsibility of the contractor.
(3)
Fees. A plan review fee as provided in the Village Fee Schedule shall be submitted with each plan prior to review.
(4)
Notification. No work may begin on the installation of fire alarm or detection system until plans have been submitted and reviewed by the Fire Department. The Fire Department shall be contacted no less than 48 hours in advance for any tests required by code either during installation or inspection, testing, or maintenance of the system.
(5)
Documentation. Copies of all inspection, testing, and maintenance of alarm or detection systems shall be forwarded to the Fire Department. In addition, the most current test/maintenance record shall be posted at the system control panel.
(6)
Runner service. The Fire Department requires that a person arrive within one hour to restore the system or notify the Fire Department that the system is considered out of order. In such case, notification must be made to all occupants of the building that the fire alarm or detection systems is out of order. The Fire Department shall be notified when the system is restored.
B.
Operation and maintenance.
(1)
The building owner shall be responsible for the installation of a smoke detector system in compliance with this section. It shall be the responsibility of the owner to assure that the system is operational prior to initial occupancy and upon change of tenants. The owner will be responsible for maintenance of detectors in all common areas.
(2)
The tenant shall be responsible for day-to-day maintenance and testing of the smoke detector system, including replacement of batteries where applicable. In the event of malfunction, other than that which can be remedied by day-to-day maintenance, the tenant must notify the owner, in writing, of any such malfunction.
(3)
The owner shall have five days upon receipt of written notice from the tenant or Fire Department to repair or replace the smoke detector or smoke detection system.