An applicant for a development activity or a change in land use shall apply all of the required standards for a minimum 100-foot Buffer as described in this article. The provisions of this chapter do not apply to an area of the Buffer that is designated as a Modified Buffer Area (MBA) under § 120-8.6.3. The minimum 100-foot Buffer shall be delineated in the field and shall be shown on all applications as follows:
B.
The Buffer shall be expanded beyond the minimum 100-foot Buffer as described in Subsection A above and the minimum 200-foot Buffer as described in Subsection C below to include the following contiguous land features:
(1)
A steep slope at a rate of four feet for every 1% of slope or the entire steep slope to the top of the slope, whichever is greater;
(2)
A nontidal wetland to the upland boundary of the nontidal wetland;
(3)
The 100-foot Buffer that is associated with a nontidal wetland of special state concern as stated in COMAR 26.23.06.01;
C.
Applications for a subdivision or for a development activity on land located within the RCA requiring site plan approval after July 1, 2008 shall include: