[Added 12-14-2020 by Ord. No. 2020-12-14]
The Town Council finds that it is in the public interest and
will ensure the health, safety, and welfare of the community through
the safe, effective and efficient use of solar energy systems (SES)
that minimize impacts on scenic, natural, cultural resources, increase
resiliency, reduce the use of and reliance on fossil fuels for power
production, reduce carbon and other greenhouse gas emissions of utility-supplied
electric energy, and provide clean, domestically-sourced alternatives
to our existing energy supply.
The purpose of this section is to permit and facilitate appropriately
scaled solar energy systems and to establish criteria and development
standards that maximize their effectiveness and efficiency while addressing
potential negative impacts in various zones throughout Town. A solar
energy system is a method of generating electrical power by converting
solar radiation into direct current electricity using semiconductors
that exhibit the photovoltaic effect. Photovoltaic power generation
employs solar panels composed of a number of solar cells containing
a photovoltaic material.
All solar energy systems shall require reviews, and approvals
as outlined in this article. Solar energy systems must be consistent
with all applicable state and federal fire and electrical safety codes
and shall obtain all necessary statewide solar, building, and electrical
permits from the Building Official prior to commencement of construction.
There are four categories of solar energy systems contemplated
by this zoning ordinance, and they are as follows:
1.
Roof-mounted system: a solar energy system that is accessory to a
primary structure. An accessory roof-mounted system shall be installed
only on the roof of a structure.
2.
Small SES: a ground-mounted solar energy system that is an accessory
use to the primary structure use. A small system shall consist of
no more than 1,600 square feet of solar panel surface area.
3.
Medium SES: a ground-mounted solar energy system that is the primary
use or an accessory use of a lot or lots which may be designed to
produce more energy than consumed by the primary use of the property
as a secondary use. A medium system shall consist of more than 1,600
square feet of solar panel surface area, but equal to or less than
40,000 square feet of solar panel surface area.
4.
Large SES: a ground-mounted solar energy system that is the primary
use or an accessory use of a lot or lots which may be designed to
produce more energy than consumed by the primary use of a lot or lots
as a secondary use. A large system shall consist of more than 40,000
square feet of solar panel surface area.
See Article V, Section J.
2.
Yard setbacks and vegetative buffer area requirements:
a)
Small SES: Yard setback areas are as required by Article IV, Section B, Land Use Requirement Table.
b)
Medium and large SES:
i.
Yard setback areas must maintain one-hundred-foot (100') minimum setbacks on all sides, and one-hundred-fifty-foot (150') minimum setbacks on all sides that abut residentially zoned property. Where this standard conflicts with the requirements of yard setbacks in Article IV, Section B, this standard is to supersede.
[Amended 11-8-2021 by Ord. No. 2021-11-2008]
ii.
Vegetated buffer areas must be a minimum of thirty feet (30')
within the yard setback where abutting residential and Town Center
(C-TC) zones and a minimum of twenty feet (20') within the yard
setback where abutting all other zones.
3.
Lot coverage:
a)
Small SES: The lot coverage for a small system shall follow
the individual zoning district regulations. The lot coverage calculations
will be a sum of the area of each individual panel's outer dimensions
as if lying flat on the ground plus the footprints of all other countable
structures under this article.
b)
Medium and large SES: Medium and large systems shall meet the
setback and screening requirements, and site plan review; otherwise,
there is no lot coverage limitation. This exemption is not intended
to apply to municipal stormwater regulations, as the panels could
have the effect of altering volume, velocity, and discharge pattern
of stormwater runoff.
The applicant shall provide the following documents, which are
generally those of the Zoning Board of Review petition or the Planning
Board's Major Land Development Review checklists; provided, however,
that the applicable board may, at its discretion, waive any document
requirement or ask for more information as it deems appropriate based
upon the submission of the applicant.
1.
Narrative report: The applicant shall provide a summary narrative
report containing:
a)
Name, address and contact information for proposed system installer,
system operator, landowner, applicant, and designated agents representing
the project.
b)
A project construction schedule.
c)
An operation and maintenance plan.
d)
A rendering or photo simulation showing the proposed completed
project with landscaping.
e)
Evidence of compliance with any applicable state environmental
regulations and state permits.
f)
An emergency response plan for public safety officials.
g)
A decommissioning/restoration plan and proposed financial security
(with supporting calculations).
h)
A landscape plan showing seeding/vegetation plan for the project
and maintenance schedule.
i)
Evidence that a preliminary interconnection feasibility study
is underway and a copy of the application with the electric distribution
company.
j)
An estimation of annual taxation revenue.
k)
List of abutters: By name, address, map and lot numbers (include
all parcels within two hundred feet (200') of the subject property).
l)
Locus map with aerial imagery showing one thousand feet (1,000')
surrounding the site.
2.
Development plans: All plans related to design, construction, installation
or modification of a SES shall be prepared, signed and stamped by
either a Rhode Island professional engineer, a Rhode Island registered
land surveyor (for property line information), and/or a Rhode Island
registered landscape architect (for landscape information). In addition,
to the checklist requirements for the various stages of development
plan review and/or major land development review, site plans shall
show the following information:
a)
Class I survey site plan showing property lines and all physical
features for the project site.
b)
Proposed changes to the landscape of the site, temporary and
permanent limits of disturbance, grading, vegetation clearing and
planting, exterior lighting, access points, emergency access provisions,
fencing, screening vegetation and/or structures.
c)
Blueprints or drawings of the entire SES showing the proposed
layout of the system.
d)
One- and or three-line electrical diagrams detailing the SES,
associated components and electrical interconnection methods, with
all current state electrical code compliant disconnects and over current
devices.
e)
Documentation and/or equipment specification sheets of the major
system components to be used, including the solar panels, mounting
system and inverter.
1.
Site design.
a)
General siting: Solar energy systems shall be located, constructed,
installed, and operated to minimize potentially adverse impacts to
nearby properties, natural resources, and or individuals. Impacts
to be minimized include, but are not limited to, those locations and
habitats for animals, including birds, and plant species of concern,
and habitat/forest fragmentation.
b)
Industry standards: Solar energy systems shall be manufactured
and designed to comply with applicable industry standards, as may
amended for time to time, including, but not limited to, the American
National Standards Institute (ANSI), Underwriters Laboratories (UL),
the American Society for Testing and Materials (ASTM), and other appropriate
certifying organizations as may be required by federal or state laws
or utility regulations.
c)
Interconnection: Solar energy systems connecting directly to
a distribution or a transmission system must submit a copy of the
preliminary interconnection study with the electric distribution company.
Any off-site impacts or infrastructure upgrades necessary to enable
the SES shall be identified, especially any impacts to existing street
trees within the connection and/or affected municipal rights-of-way.
Where such street trees may be impacted, the Tree Warden or Tree Commission
shall submit an advisory opinion on the extent of the off-site impacts
and a recommendation for mitigation of the impacts.
d)
Land clearing: Wherever practical clearing of natural vegetation
shall be limited to what is necessary for the construction, operation,
and maintenance of the solar energy system or otherwise prescribed
by the applicable laws, regulations, and ordinances. The disturbance
and removal of topsoil from the site shall be limited to those areas
that are required for the installation of the proposed solar energy
system. In no case shall more than twenty percent (20%) of the area
inclusive of inter-row and panel/collector spacing covered by the
solar panels be on cleared woodlands. In no case shall the total area
of cleared woodland exceed twenty thousand (20,000) square feet.
[Amended 11-8-2021 by Ord. No. 2021-11-08]
e)
Security fencing: Medium and large solar energy systems shall
surround the perimeter of the installation with no less than six feet
(6') in height of fencing. Where fencing is used, consideration
for small and large terrestrial wildlife shall be incorporated into
the fencing design. Fences shall be elevated above grade by a minimum
of five inches (5") to allow for passage of small terrestrial animals.
Barbed wire fences shall not be permitted.
f)
Buffer areas and screening: Natural vegetation or additional
landscape screening shall be provided as determined by the Zoning
Board of Review or Planning Board depending upon the existing land
use on the site and the adequacy of the site's natural vegetation
or lack thereof to mitigate impacts to public views, scenic roads,
and abutters. The Zoning Board of Review or Planning Board shall have
the authority to set site specific width of buffers, height of plants
at planting, and to require an opaque screen to adjacent properties
and/or public roads. If required by the Zoning Board of Review or
Planning Board, the landscape plan shall be prepared by a registered
landscape architect.
g)
Groundcover and plant species selection: Pollinator-friendly
seed mixtures shall be used along with native plants to the maximum
extent possible. All plants and seeds should be native to the greatest
extent practicable, and no plants known or suspected (e.g., aggressive
spreading non-natives) to be invasive shall be used.
h)
Agricultural accessory use: For installations on agricultural
lands, the entire lot should be examined by the Zoning Board of Review
or Planning Board and farm owner with areas designated within the
total acreage for farming use, buffers, and SES shall be located as
to minimize impact to prime agricultural soils or soils of statewide
importance wherever possible. No topsoil or prime agricultural soil
shall be removed from the site for installation of the facility. All
soils retained shall be reused in the landscaping/vegetative plan
for the site.
i)
Lighting: Exterior lighting within the SES shall be the minimum
necessary. All fixtures must be full-cut off fixtures approved by
the International Dark Sky Association and correlated color temperatures <3000K for bulbs.
j)
Signage: Signs shall comply with the Portsmouth Sign Ordinance.
Ground-mounted systems shall identify the owner and provide a twenty-four
hour emergency contact phone number. Solar energy systems shall not
be used for displaying any advertising except for the identification
of the manufacturer or operator of the solar energy system.
k)
Power lines: Power and communication lines running between banks
of solar panels and to the off-site electric distribution system or
interconnections with buildings onsite excepting, the poles owned
by the electric distribution company which are typically required
to be above ground, shall be buried underground. Exemptions may be
granted by the Zoning Board of Review or Planning Board in instances
where written documentation for shallow bedrock, a high groundwater
table, prior environmental contamination or other elements of the
natural landscape interfere with the ability to bury lines.
2.
Operating standards.
a)
Site control: The applicant shall submit documentation for access
and control of the project site sufficient to allow for the construction
and operation of the proposed energy system.
b)
Stormwater and erosion control: All SES are subject to the soil
erosion and sediment control ordinance as well as the storm water
control provisions of the Subdivision and Land Development Regulations.
c)
Pesticide and herbicide usage: Solar energy systems shall be
designed, constructed and maintained in a way that minimizes the use
of herbicides and pesticides.
d)
Modifications: Material (equipment) or site design modifications
to a solar energy system made after issuance of the required building
permit shall require approval by the applicable board.
e)
Recording: Maintenance agreements, a final as-built including
any modifications approved by the applicable board shall be recorded
in Land Evidence Records for all ground array systems.
f)
Abandonment: With the exception of roof-mounted structures,
absent notice of a proposed date of decommissioning or written notice
of extenuating circumstances, the solar energy system shall be considered
abandoned if it fails to operate for more than one (1) year without
the written consent of the Zoning Board of Review or Planning Board
as it relates to the land development project approval.
g)
Surety: Prior to final approval and recording of a medium or
large ground array, the owner/operator shall provide an appropriate
surety approved by the Zoning Board of Review or Planning Board equal
to 110% of the current cost of removal and re-vegetation of the site,
as recommended by the applicable board. Surety shall be held by the
Town until such time the applicable board votes to release the funds
finding compliance with all obligations and no need to secure future
compliance. Surety will not be required for a municipal or state-owned
facility.
h)
Municipal exemption: Nothing herein shall preclude the Town
of Portsmouth from installing SES on any Town-owned or controlled
property regardless of the zoning district.
The application requirements for all small SES proposals shall follow the application requirements of Article VII, Section B, Procedures.
It shall be unlawful for any person or entity to construct, install, operate, or substantially modify an SES that is not in compliance with the provisions of this article or with any condition contained in a permit issued pursuant to this chapter. All violations shall be enforced under Article XVI of this chapter.
