A certain document, two copies of which are on file in the office of the city secretary of the city, being marked and designated as the International Mechanical Code, 2018 edition including appendix chapter A as published by the International Code Council, be and is hereby adopted as the mechanical code of the city, regulating and governing the design, construction, quality of materials, erection, installation, alteration, repair, location, relocation, replacement, addition to, use or maintenance of mechanical systems as herein provided, providing for the issuance of permits and collection of fees therefor; and each and all of the regulations, provisions, penalties, conditions and terms of said mechanical code, on file in the office of the city secretary are hereby referred to, adopted and made a part hereof as if fully set out in this legislation with the additions, insertions, deletions and changes, if any, prescribed in this section. The following sections are hereby revised:
Section 101.1 Insert: City of Hereford, Texas.
Section 106.5.2 Insert: Schedule of minimum permit fees:
Minimum Permit Fees
Permit issuance:
 
For issuing each permit
$25.00
Unit fee schedule:
 
1. Residential heating and air-conditioning:
 
First unit
$25.00
Each additional unit
$10.00
2. Commercial heating and air-conditioning:
 
First unit
$50.00
Each additional unit
$10.00
3. Duct system
$25.00
4. Commercial hoods, type I or II
$25.00
5. Commercial refrigeration, cold storage per unit
$25.00
6. Inspection for which no fee is indicated
$25.00
Section 106.5.3.2 and 106.5.3.3 are hereby deleted.
Section 108.4 is amended to provide that the penalty for the violation of this section shall be the penalty as provided in section 1.01.009 of the Code of Ordinances of the City.
Section 108.5 is amended to provide that the penalty for the violation of this section shall be the penalty as provided in section 1.01.009 of the Code of Ordinances of the City.
(Ordinance 05.10.21, secs. 3–7, adopted 5/10/21)