A.
General.
Place embedded items as shown on the plan details and in such a manner that will not impair the strength of the structure. Should locations of embedded items conflict with reinforcement or be detrimental to strength of the structure, notify the City of Magnolia, Engineer or designated representative of the Engineer so the items can be relocated. Notification shall be such that the scheduled concrete placement is not delayed and there is adequate time to relocate the embedded items. Adequately secure all embedded items to prevent displacement during concrete placement.
B.
Conflicts with Reinforcement.
Do not cut or reposition reinforcing steel to facilitate the installation of inserts, conduits, sleeves, anchor bolts, mechanical openings and similar items without the prior approval of the Engineer or designated representative of the Engineer.
C.
Construction Joints.
Make construction joints only at locations shown the plan details or as specified in these specifications. Relocation of construction joints is strictly prohibited without the prior approval of the Engineer or designated representative of the Engineer. Install construction joints in compliance with the following procedures:
1.
Locate joints in such a manner that will least impair the strength of the structure being constructed.
2.
Place all joints perpendicular to main reinforcement. Reinforcing shall be extended through all joints unless otherwise directed.
3.
Prepare joints by removing loosened particles of aggregates or damaged concrete at the surface.
4.
Install any joint filler on expansion joints to full depth of the concrete section with the top held down 3/4-inch to provide recess for sealant.
D.
Waterstops. Install waterstops in the locations shown and in a manner that will develop effective watertightness. Position and support waterstops against any displacement during placement of concrete.
(Ordinance 2007-106, App. B, adopted 3/20/07)