|
A.S.A.
|
A.S.T.M.
|
F.S.
|
OTHER
|
---|---|---|---|---|
Nonmetallic pipe
|
|
|
|
|
Asbestos-cement sewer pipe
|
|
|
SS-P-351(1940)
|
|
Clay sewer pipe
|
|
C13-46
|
CS-P-361A(1942)
|
|
Concrete sewer pipe
|
|
C14-46
|
SS-P-371(1937)
|
|
Fibre pipe
|
|
|
|
C.S. 116-44
|
Ferrous pipe and fittings
|
|
|
|
|
Cast iron soil pipe and fittings
|
A40.1-1935
|
A74-42
|
WW-P-401(1951)
|
|
Cast iron water pipe
|
A21.2-1939
|
A44-41
|
WW-P-421(1940)
|
A.W.W.A. (1908)
|
Cast iron screwed pipe
|
A40.5-1945
|
|
WW-P-356(1936)
|
|
Cast iron screwed drainage fittings
|
B16.12-1942
|
|
WW-P-501a(1939)
|
|
Cast iron drainage fittings
|
|
|
WW-P-491a(1945)
|
|
Wrought iron pipe
|
B36.2-1939
|
A72-39
|
WW-P-441a (1943)
|
|
Steel pipe
|
G8.7-1943
|
A120-44
|
(Types 1 & 11) WW-P-406(1944)
|
|
Open hearth iron pipe
|
|
A253-44
|
Type 111 only WW-P-406(1944)
|
|
Malleable iron screwed
|
(150 lbs.) B16C-1939
|
|
WW-P-521b(1945)
|
C.S. 7-29
|
Nonferrous pipe and fittings
|
|
|
|
|
Brass tubing
|
|
B135.43 T*
|
|
|
Brass pipe (Ips only)
|
|
B43-42
|
WW-P-351(1930)
|
|
Copper pipe (type K & L only in drains)
|
|
B88-49
|
WW-P-377(1932)
|
|
Rough brass screwed fittings
|
|
|
WW-P-448a(1941)
|
M.S.S. SP-10 C.S. 5-40
|
Seamless copper tubing
|
|
B75-43T
|
WW-T-797(1933)
|
|
Copper water tubes
|
H23.1-1941
|
B88-49
|
WW-T-799(1934)
|
|
Soldered fittings (for copper water tube)
|
A40.3-1941
|
|
|
|
Flared fittings (for copper water tube)
|
A40.2-1936
|
|
|
|
Lead pipe
|
|
|
WW-P-325
|
|
Lead traps and bends
|
|
|
WW-P-325
|
|
Miscellaneous
|
|
|
|
|
Calking lead
|
|
|
QQ-L-156(1934)
|
C.S. 94-41
|
Sheet lead
|
|
|
(Grade A only)
|
|
Sheet brass
|
|
B36-44T B121-44T B152-44T
|
QQ-L-201(1942) QQ-B-611a(1943)
|
|
Sheet copper
|
|
|
QQ-C-501(1942)
|
|
Galvanized iron and steel sheet
|
G8.8-1937
|
A163-39 B93-38T Sec. 3, 5, 6 Section D-6
|
QQ-1-716(1942)
|
|
Galvanized pipe & fittings
|
|
A120-44
|
WW-P-406(1944)
Section D-7
|
|
Cement lining
|
A21.4-1939
|
|
WW-P-406(1944)
|
|
Coal tar enamel protective coating
|
|
|
|
A.W.W.A.
|
Soft solder
|
|
B32-40T
|
QQ-S-571(1942)
|
7A.6-1940
|
Fixture setting compound
|
|
|
HH-C-36(1936)
|
|
* Mercurous nitrate test required.
|
Note–A.S.T.M. standards are issued under fixed designations;
the final number indicates the year of original adoption, or in the
case of revision, the year of last revision. “T” indicates
Tentative. In the “C.S.” series of standards also the
final number indicates the year of issue. For federal specifications,
the year indicated in the above table is that of the date of issue
or that of the latest revision or amendment.
|
A.S.A.
|
American Standards approved by the American Standards Association,
29 West 39th Street, New York, N.Y.
|
A.S.T.M.
|
Standards and tentative standards published by the American
Society for Testing Materials, 260 S. Broad St., Philadelphia, Pa.
|
F.S.
|
Federal specifications published by the Federal Specifications
Executive Committee and obtainable from the Superintendent of Documents,
Government Printing Office, Washington, D.C.
|
A.W.W.A.
|
Standards and tentative standards published by the American
Waterworks Association, 22 East 40th Street, New York, N.Y.
|
C.S.
|
Commercial standards representing recorded voluntary standards
of the trade promulgated by the United States Department of Commerce
through the National Bureau of Standards and obtainable from the Superintendent
of Documents, Washington, D.C.
|
M.S.S.
|
Standards published by the Manufacturers Standardization Society
of the Valve & Fittings Industry, 420 Lexington Ave., New York,
N.Y.
|
A.H.A.
|
American Hospital Association.
|
Inside Diameter
|
Wall Thickness
|
Nominal Wt. Per Ft.
|
---|---|---|
1-1/2 in.
|
.138 in.
|
3.50 lbs.
|
2 in.
|
.142 in.
|
4.75 lbs.
|
3 in.
|
.125 in.
|
6.00 lbs.
|
4 in.
|
.125 in.
|
8.00 lbs.
|
Inside Diameter
|
Weight
|
---|---|
2"
|
16 oz.
|
3"
|
24 oz.
|
4"
|
32 oz.
|