City of Aubrey, TX Article 11 APPENDIX B, Final Plat Checklist

§ 1 Name of Plat.

The following elements must be shown. Each lot shall comply with the requirements specified in the Zoning Chapter for width, depth, and area. If plat requires more than one sheet, number the sheets and provide match lines and a key map.

Staff	Applicant
␣	␣	final plat substantially conforms with the Approved Preliminary Plat
␣	␣	location map, north arrow, written and graphic scale
␣	␣	location and dimensions of all boundary lines (indicated by heaviest lines) and all lots
␣	␣	a number or letter identifying each lot, block, and site
␣	␣	proposed street names
␣	␣	title block in the lower right corner that includes:
		• type of plat
		• name of subdivision, with section or phase if applicable
		• lot and block numbers
		• reference to the original survey and previous plat including recording information
		• city, county, state
		• date of preparation
		• number of lots
		• finished floor elevation for all lots adjacent to flood prone area
␣	␣	appropriate owner’s certifications, as shown in Article 11
␣	␣	location, dimension, and purpose of all easements within or abutting the subdivision, and the recording information of all existing easements
␣	␣	Regulatory flood elevations and boundaries of flood prone areas including floodways, if known
␣	␣	the following information on adjoining property, which should be shown with dotted or dashed lines:
		• if platted, subdivision name; lot, block, or tract numbers; recording information
		• if unplatted, current deed record ownership information
		• if subdivided without platting, both of the above
␣	␣	gross acreage of the subdivision
␣	␣	former lot numbers and lot lines shown in half tones (“ghosted”)
␣	␣	location of city limit lines if they traverse, form a part of the boundary, or are contiguous to the boundary of the subdivision
␣	␣	data table showing the numbers of residential and non-residential lots and the acreages of residential, non-residential, public street, and park or open space uses
␣	␣	location and dimensions of existing structures and a notation stating whether structures will remain or be removed
␣	␣	name, address, phone, fax, and email address of record owner, the professional preparing the plat, and the developer.

§ 2 Required Documents.

Staff review will not begin until all the following items have been submitted:

Staff	Applicant
␣	␣	Plat application with owner’s disclosure and notary statement
␣	␣	Application fee
␣	␣	Filing fee
␣	␣	Documents required check list, completed and signed by applicant
␣	␣	7 folded copies of the plat, minimum sheet size 18"x24", maximum 24"x36", folded to 9"x12" with the title block visible
␣	␣	7 - 11"x17" reduction of the plat
␣	␣	3 folded copies of the approved Engineering construction.
␣	␣	1 - CD vector image in AUTOCAD 2010 (or most recent version) and a PDF file for each plat and utility layout drawings shall be provided to the City at the time of submission of the Plat.
␣	␣	After Approval and all improvements are complete 3 mylars (permanent reproducible ink) and 1 paper print with all signatures on sheets 24 inches wide and 36 inches long and shall be drawn at a scale of one inch equals 100 feet. Where more than one sheet is required an index sheet showing the entire Subdivision shall be attached to the Plat

Preparer’s Signature: __________

Printed Name: __________

Date: __________

(Ordinance 585-16, sec. 2, adopted 12/15/15)