Where as-built plans are required by special permit, they shall be submitted to the Planning Board after all special permit items have been completed for the project. The as-built plan shall be submitted in the same scale as the approved special permit site plan. The acceptable as-built plan shall be submitted with one Mylar version, one full-size black-and-white print, and digital copies of said plan.
The as-built plan shall contain the following information:
A.
Lot lines and roadways, including any easements within the project. Bearings and distances shall not be a part of this plan.
B.
All granite bounds, including registered land surveyor's certification and stamp.
C.
Location and contours for the roadway(s), including center-line profile. The profile shall show the proposed grade as well as the as-built center line of the roadway(s) every 50 feet.
D.
Location and contours for the sidewalk(s).
E.
Location and contours of all drainage within the project, including detention basins. The drainage structures shall have the rim, invert, and sump elevations. The locations and elevations of all drainage structures shall be drawn on the road profile. The detention basins shall have one-foot contours with spot elevations for the bottom and top of the embankments. There shall also be spot elevations for all spillways and elevations on pipes or structures instrumental in the operation of the basins.
F.
Water system, including all gates and hydrants.
G.
Streetlighting fixtures, utility poles, conduits, transformers, and utility boxes within the project.
H.
Major features of the land within the right-of-way, such as driveways, houses, walls, fences, natural drainagecourses, etc.
I.
Locations of all landscape improvements as required.
J.
Any and all benchmarks used within or surrounding the project.