Unless otherwise noted or if a facility is located within a
municipal right-of-way, operation and maintenance of stormwater management
facilities and conveyance systems is the sole responsibility of the
property owner or assigns, in perpetuity.
A. The municipality shall make the final determination on the continuing
maintenance responsibilities prior to final approval of the SWM site
plan. The municipality may require a dedication of such facilities
as part of the requirements for approval of the SWM site plan. Such
a requirement is not an indication that the municipality will accept
the facilities. The municipality reserves the right to accept or reject
the ownership and operating responsibility for any portion of the
stormwater management controls.
B. Facilities, areas, or structures used as SWM BMPs shall be enumerated
as permanent real estate appurtenances and recorded as deed restrictions
or conservation easements that run with the land.
C. The O&M plan shall be recorded as a restrictive deed covenant
that runs with the land.
D. No person shall modify, remove, fill, landscape, or alter any SWM
BMPs, facilities, areas, or structures without the written approval
of the municipality, with the exception of necessary maintenance activities
such as mowing.
E. The municipality may take enforcement actions against an owner for
any failure to satisfy the provisions of this article.
Persons installing stormwater storage facilities shall be required
to pay a specified amount to the municipal stormwater maintenance
fund to help defray costs of periodic inspections and maintenance
expenses. The amount of the deposit shall be determined as follows:
A. If the storage facility is to be privately owned and maintained,
the deposit shall cover the cost of periodic inspections performed
by the municipality for a period of 10 years, as estimated by the
Municipal Engineer. After that period of time, inspection expenses
will be assessed by the municipality on an as-needed basis thereafter.
B. If the storage facility is to be owned and maintained by the municipality,
the deposit shall cover the estimated costs for maintenance and inspections
for 10 years. The Municipal Engineer will establish the estimated
costs utilizing information submitted by the applicant.
C. The amount of the deposit to the fund shall be converted to the present
worth of the annual series values. The Municipal Engineer shall determine
the present worth equivalents, which shall be subject to the approval
of the governing body.
D. The general formula for calculating the annual inspection fee shall
be as follows:
ITi x IR x Ni = ICi
|
ICi + ICii + . . . = IC
|
0.25 (IC) = AC
|
IC + AC = Annual Inspection Cost
|
Where:
|
ITi
|
=
|
Inspection time per SWM BMP (varies per BMP).
|
IR
|
=
|
Inspection rate (varies per year).
|
Ni
|
=
|
Quantity of particular SWM BMP.
|
ICi
|
=
|
Inspection cost for particular SWM BMP.
|
IC
|
=
|
Total inspection cost of all SWM BMPs.
|
AC
|
=
|
Administrative cost.
|