A. 
The Building Inspector shall determine the climatic and geographic design criteria for buildings and structures constructed within this Village as required by the Uniform Code. Such determinations shall be made in the manner specified in the Uniform Code using, where applicable, the maps, charts, and other information provided in the Uniform Code. The criteria to be so determined shall include but shall not necessarily be limited to the following:
(1) 
Design criteria to include ground snow load; wind design loads; seismic category; potential damage from weathering, frost, and termite; winter design temperature; whether ice barrier underlayment is required; the air freezing index; and the mean annual temperature;
(2) 
Heating and cooling equipment design criteria for structures within the scope of the RCNYS; the design criteria shall include the data identified in the Design Criteria Table found in Chapter 3 of the RCNYS; and
(3) 
Flood hazard areas, flood hazard maps, and supporting data. The flood hazard map shall include, at a minimum, special flood hazard areas as identified by the Federal Emergency Management Agency in the Flood Insurance Study for the community, as amended or revised with:
(a) 
The accompanying Flood Insurance Rate Map (FIRM);
(b) 
Flood Boundary and Floodway Map (FBFM); and
(c) 
Related supporting data along with any revisions thereto.
B. 
The Building Inspector shall prepare a written record of the climatic and geographic design criteria determined pursuant to § 132-82A above, shall maintain such record within the Building Department, and shall make such record readily available to the public.