All signs within industrial districts must comply with the standards for industrial districts contained in Sections
17.28.400 through 17.28.499, and with the standards contained in Section
17.28.070. In lieu of the standards provided in Sections
17.28.400 through 17.28.499, office buildings must comply with the standards for office district contained in Section
17.28.300 through 17.28.399.
(Ord. 98-10 § 1)
The following sign types are prohibited in the industrial districts.
A. Freestanding
freeway oriented signs.
(Ord. 98-10 § 1)
In addition to the signs otherwise permitted by this chapter
for industrial districts, the following sign types are permitted in
these districts provided that they meet the following specified standards:
A. Requirements for wall mounted signs for buildings with three stories or more are the same as Section
17.28.250.
B. Requirements for on-site directional and directory signs are the same as Section
17.28.280.
(Ord. 98-10 § 1)
Freestanding business center identification signs are intended
to identify business centers.
A. Maximum
number of signs shall be two per major entrance, plus one additional
per major intersection.
B. Maximum
signs area shall be thirty square feet.
C. Maximum
sign structure height shall be six feet.
(Ord. 98-10 § 1)
Tenant identification signs are intended to identify tenants
whether or not located in shopping centers. These signs may be single
tenant or multitenant identification signs. However, these two types
of signs are not permitted together at any time.
A. Requirements
for Freestanding Tenant or Building Identification Signs in Industrial
Districts. Freestanding business or building identification signs
are intended to provide identification for a tenant occupying an entire
industrial building. They are also used to identify a multitenant
industrial building.
1. Maximum
number of signs shall be one per street frontage, plus one additional
per major intersection.
2. Maximum
sign area for each sign shall be twenty square feet.
3. Maximum
sign structure height shall be six feet.
4. No
more than one tenant shall be identified.
B. Requirements
for Freestanding Multiple Tenant Identification Signs in Industrial
Districts.
1. Each
center shall be allowed one multitenant sign. However, if the center
has more than one street frontage, one multitenant sign per street
frontage shall be allowed.
2. Maximum
sign structure height shall be six feet.
3. Maximum
sign area for each sign shall be twenty square feet.
4. The
center name may be added to multitenant signs but the total sign area
for each sign including the center name shall not exceed twenty square
feet.
5. The
maximum number of signs per panel shall be one.
6. The
minimum panel width shall be five inches.
7. The
minimum letter size shall be three inches.
(Ord. 98-10 § 1)
Wall mounted business or building identification signs are intended
to provide identification for individual businesses in single-tenant
or multitenant industrial buildings.
A. Maximum
number of signs shall be one per frontage for each tenant.
B. Maximum
sign area for each sign shall not exceed one-half square foot per
lineal foot of business frontage.
C. Building
identification signs are only permitted if no tenant identifications
are permitted by this chapter.
(Ord. 98-10 § 1; Ord. 14-01 § 27)