The purpose of this chapter is to establish a Planned Development
(PD) Overlay Zone that provides for one or more properties to be developed
under a plan that provides for better coordinated development and
incorporates development standards crafted to respond to site conditions
to:
A. Promote
the development of a cohesive and aesthetically pleasing urban structure;
B. Provide
for greater flexibility in the design of the developments than is
otherwise possible through the strict application of zone regulations;
C. Ensure
compliance with the General Plan and provide various types of land
use which can be combined in compatible relationships with each other
as a part of a holistically planned development; and
D. Promote
innovation and creativity in building design and development concepts.
(Ord. 19-1 § 3)
A Planned Development Overlay Zone shall be noted on the Zoning
Map by adding the designation "-PD" to the base zone.
(Ord. 19-1 § 3)
New development in a PD Overlay Zone requires a valid Planned
Development (PD) Permit if it does not conform to the development
standards in the PD Overlay Zone. Any permitted or conditional use
authorized by this title may be included in an approved PD Permit
consistent with the General Plan designation(s) for the property.
(Ord. 19-1 § 3)
A PD Permit and/or PD Overlay Zoning Amendment shall only be
approved if all of the following findings are made:
A. The
proposed development is consistent with the General Plan and any applicable
specific plan, including the density and intensity limitations that
apply;
B. The
subject site is physically suitable for the type and intensity of
the land use being proposed;
C. Adequate
transportation facilities and public services exist or will be provided
in accord with the conditions of development plan approval, to serve
the proposed development; and the approval of the proposed development
will not result in a reduction of traffic levels of service or public
services so as to be a detriment to public health, safety, or welfare;
D. The
proposed development will not have a substantial adverse effect on
surrounding land uses and will be compatible with the existing and
planned land use character of the surrounding area;
E. The
development generally complies with applicable adopted design guidelines;
and
F. The
proposed development is demonstratively superior to the development
that could occur under the standards applicable to the underlying
base zone, and will achieve superior community design, environmental
preservation and/or substantial public benefit.
(Ord. 19-1 § 3)
In approving a PD Overlay Zone and/or PD Permit, the Review
Authority may impose reasonable conditions deemed necessary to:
A. Ensure
that the proposal conforms in all significant respects with the General
Plan and with any other applicable plans or policies that the City
has adopted;
B. Achieve
the general purposes of this title or the specific purpose of the
zone in which the project is located;
C. Achieve
the findings listed above; or
D. Mitigate
any potentially significant impacts identified as a result of review
conducted in compliance with the requirements of the California Environmental
Quality Act.
(Ord. 19-1 § 3)
Plans for a project in a PD Overlay Zone shall be accepted for
Planning and Building Permits or subdivisions only if they are consistent
with an approved PD Permit and any conditions of approval or the PD
Overlay development standards. No project may be approved and no Building
Permit issued unless the project, alteration or use is consistent
with an approved PD Permit or PD Overlay.
(Ord. 19-1 § 3)