A manufactured or mobile home may be placed under a freestanding roof with design review approval except that a freestanding roof may not cover a manufactured or mobile home in an R-1, R-2, R-3, A-2 zoning district, D combining district or within areas designated as scenic highway corridors.
(a) Architectural Requirements for Freestanding Roofs.
(1) Roofs must not be elevated so high as to make the roof of the manufactured or mobile home visible and gable ends must have siding extending down far enough to conceal the existing roof at the ends.
(2) Roof overhangs must extend a minimum of twelve inches from the sides of supporting members and on the gable ends.
(3) Roof must be a minimum four in twelve pitch.
(4) All plumbing and heating vents must be extended through the freestanding roof to the length required within the building codes.
(5) Siding must be one of the following:
(A) Wood composite siding material;
(F) Natural or cultured stone; or
(G) Metal or vinyl siding may be used in conjunction with one of the above materials provided not less than one half the structure is sided or skirted with one of the materials in subsections
(5)(A) through (F) above. Any metal or vinyl siding must be treated with an oxidation inhibitor and shall have a no-glare surface.
(6) Structures shall not be painted in fluorescent, luminescent, or other extreme colors which detract from the appearance of the neighboring property, the community as a whole or the natural environment.
(Ord. 467-AE § 5, 2009; Ord. 467-AF § 2, 2009)