(a)
Any Class III users subject to federal categorical standards, or any Class III users at the discretion of the Director of Utilities, as well as all Class IV users, shall be required to install and maintain monitoring facilities to allow inspection, sampling and/or measurements of the building sewer or plumbing systems and may also be required to provide, install and operate sampling and/or metering equipment at the user's expense. These facilities shall be normally situated on the user's premises.
(b)
When one or more user can discharge into a common side sewer, the Director of Utilities may require installation of a separate monitoring facility for each user. Also, when in the judgment of the Director of Utilities, there is a significant difference in wastewater constituents and characteristics produced by different operations of a single user, the Director of Utilities may require that separate monitoring facilities be installed for each separate discharge.
(c)
If the monitoring facility is inside the user's fences, there shall be accommodations to allow access for City personnel such as a gate secured with a City lock. There shall be ample operating area in or near such sampling points and equipment to allow accurate sampling and compositing of samples for analysis. The user shall assure that access and sampling and measuring equipment are maintained in a safe and proper operating condition at all times at no expense to the City.
(d)
The sampling and monitoring facilities shall be provided in accordance with the City's requirements and all applicable construction standards, safety devices and specifications. Construction shall be completed within 90 days following written notification to do so by the City.
(Prior Code § 20-52(B)(3)(d); Ord. 83-1054 § 1, eff. 6/16/83; Ord. 2005-01, eff. 3/3/05)