Residential
Zones.
RR: Rural Residential is intended to provide for
very low density single-family detached residential units on larger
lots ranging in size from two to eight net acres with maximum densities
of 0.5 to 0.125 units per net acre for compatibility with the more
rural areas of the City. Parcels located in flood plain areas, which
are designated as Rural Residential Flood Plain (RRFP), are designated
0.125 units per acre (eight net acre lots). Other parcels range from
two net acre lot size to four net acre lot size depending on slope.
One primary dwelling is permitted on each legal lot. Single-family
units may be attached to other single-family units provided each unit
is located on a separate legal lot with approval of a PRD.
RR-1: Rural Residential 1 is intended to provide
for low density single-family detached residential units with minimum
lot sizes of one net acre and maximum densities of one unit per net
acre for rural area compatibility. One primary dwelling is permitted
on each legal lot. Single-family units may be attached to other single-family
units provided each unit is located on a separate legal lot with approval
of a PRD.
RR-2: Rural Residential 2 is intended to provide
for low density single-family detached residential units with minimum
lot sizes of 21,500 net square feet and maximum densities of two units
per net acre, as a transition from the rural to the more suburban
areas within the City. One primary dwelling is permitted on each legal
lot. Single-family units may be attached to other single-family units
provided each unit is located on a separate legal lot with approval
of a PRD.
R-3: Residential 3 is intended to provide for single-family
detached residential units with minimum lot sizes of 14,500 net square
feet and maximum densities of three units per net acre, as a rural
to suburban transition. One primary dwelling is permitted on each
legal lot. Single-family units may be attached to other single-family
units provided each unit is located on a separate legal lot with approval
of a PRD.
R-5: Residential 5 is intended to provide for lower
density suburban development consisting of single-family detached
units with minimum lot sizes of 8,700 net square feet and maximum
densities of five units per net acre. One primary dwelling is permitted
on each legal lot. Single-family units may be attached to other single-family
units provided each unit is located on a separate legal lot with approval
of a PRD.
R-8: Residential 8 is intended to provide for suburban
single-family detached residential units with minimum lot sizes of
5,400 net square feet and maximum densities of eight units per net
acre. One primary dwelling is permitted on each legal lot. Single-family
units may be attached to other single-family units provided each unit
is located on a separate legal lot with approval of a PRD.
RS-11: Residential RS-11 is intended to provide
for single-family detached residential units with minimum lot sizes
of 3,950 net square feet and maximum densities of 11 units per net
acre. One primary dwelling is permitted on each legal lot. Single-family
units may be attached to other single-family units provided each unit
is located on a separate legal lot with approval of a PRD.
R-11: Residential 11 is intended to provide for
a variety of residential development types found within the coastal
areas, ranging from single-family detached units to single-family
attached units, such as condominiums, townhouses, and senior housing.
The minimum lot size is 3,950 net square feet and the maximum density
is 11 units per net acre.
R-15: Residential 15 is intended to provide for
higher density residential development within the coastal areas including
single-family units (attached and detached), duplex units, and senior
housing, with a maximum density of 15 units per net acre. A duplex
is a permitted use on lots of 5,000 square feet gross or greater that
existed prior to adoption of this Code (March 23, 1989).
R-20: Residential 20 is intended to provide for
compatible high density multiple family residential development including
apartments, condominiums, and senior housing, with a maximum density
of 20 units per net acre.
R-25: Residential 25 is intended to provide for
compatible high density multiple family residential development including
apartments, condominiums, and senior housing, with a maximum density
of 25 units per net acre.
R-30 OL: Residential 30 Overlay is intended to
provide for compatible high density multiple family residential development
including apartments, condominiums, and senior housing, with a maximum
density of 30 units per net acre and a minimum density of 25 units
per net acre. The purpose of the R-30 Overlay Zone is to diversify
the housing options available in the community, and expand opportunities
for creating affordable housing.
MHP: Mobile Home Park is intended to provide exclusively
for mobilehome park development with a maximum density of 11 units
per net acre for new or redeveloped parks.