(A)
Existence of nonconformities.
(1)
The purpose of this Subsection 1.06 is to establish provisions for the allowance and potential alteration of uses, lots and/or structures which do not conform to currently applicable standards or regulations, but which were in conformance with standards in place at the time of their inception, and have been rendered nonconforming due to a change in the applicable standards and regulations.
a.
Nonconformities occur in three (3) general categories, or combinations thereof.
1.
Nonconforming lots as described in 1.06.02(A)(1). For example, a nonconforming lot can be nonconforming as to lot area or dimension requirement.
2.
Nonconforming structures as described in 1.06.02(A)(1). For example, a nonconforming structure can be nonconforming as to setback, yard, or height lot area or dimension requirement.
3.
Nonconforming uses are uses as described in 1.06.02(A)(1).
(2)
It is the declared intent of this section that nonconforming uses and structures eventually be eliminated and be required to comply with the regulations of the Zoning Ordinance, having due regard for the property rights of the person affected, the public welfare, and the character of the surrounding area.
(C)
Incompatible uses.
Notwithstanding anything to the contrary, nonconforming uses are hereby declared incompatible with the permitted uses in the districts involved.
(Ordinance 2021-07-47 adopted 7/6/21)