[Amended 6-22-2020 by Ord. No. 444]
A.
General prohibitions. No user shall introduce or cause to be introduced into the POTW any pollutant or wastewater which causes pass through or interference. These general prohibitions apply to all users of the POTW whether or not they are subject to categorical pretreatment standards or any other national, State or local pretreatment standards or requirements.
B.
Specific prohibitions. No user shall introduce or cause to be introduced into the POTW the following pollutants, substances or wastewater:
(1)
Pollutants which create a fire or explosive hazard in the POTW including, but not limited to, waste streams with a closed-cup flashpoint of less than 140° F. (60° C.) using the test methods specified in 40 CFR 261.21.
(2)
Wastewater having a pH less than five or more than 11.0, or otherwise causing corrosive structural damage to the POTW or equipment.
(3)
Solid or viscous substances which may cause obstruction to the flow in a sewer or other interference with the operation of the wastewater treatment facilities such as, but not limited to: grease, garbage with particles greater than 1/2 inch in any dimension, animal guts or tissues, paunch manure, bones, hair, hides or flushings, entrails, whole blood, medical waste, feathers, ashes, cinders, sand, stone or marble dust, metal, glass, straw, shavings grass clippings, rags, spent grains, spent hops, wastepaper, paper dishes, cups, milk containers, lime slurries, wood, plastics, gas, tar, asphalt residues, residues from refining or processing of fuel or lubricating oil, mud, or glass grinding or polishing wastes.
(4)
Pollutants, including oxygen-demanding pollutants (BOD, etc.), released in a discharge at a flow rate and/or pollutant concentration which, either singly or by interaction with other pollutants, will cause interference with the POTW.
(5)
Any wastewater having a temperature which will inhibit biological activity in the treatment plant resulting in interference, but in no case wastewater which causes the temperature at the introduction into the treatment plant to exceed 104° F. (40° C.).
(6)
Pollutants which result in the presence of toxic gases, vapors or fumes within the POTW in a quantity that may cause acute worker health and safety problems.
(7)
Petroleum oil, nonbiodegradable cutting oil or products of mineral oil origin, in amounts that will cause interference or pass through.
(9)
Noxious or malodorous liquids, gases, solids, or other wastewater which, either singly or by interaction with other wastes, are sufficient to create a public nuisance, odor problem, or a hazard to life, or to prevent entry into the sewers for maintenance or repair.
(10)
Wastewater with a true color in excess of 100 platinum cobalt units, except by dischargers with a higher limit specified in their permit.
(11)
Wastewater containing any radioactive wastes or isotopes except in compliance with applicable State or Federal regulations or any radioactive wastes or isotopes of such half-life or concentration as may exceed limits established by State or Federal laws or regulations.
(12)
Stormwater, surface water, groundwater, artesian well water, roof runoff, subsurface drainage, swimming pool drainage and noncontact cooling water, unless specifically authorized by the City.
(13)
Wastewater causing, alone or in conjunction with other sources, the treatment plant's effluent to fail a toxicity test.
(14)
Detergents, surface-active agents or other substances which may cause excessive foaming in the POTW.
(15)
Any garbage that has not been properly shredded to at least particles less than 1/2 inch in any dimension. Garbage grinders may be connected to public sewers from homes, hotels, institutions, restaurants, hospitals, catering establishments or similar places where garbage originates from the preparation of food in kitchens for the purpose of consumption on the premises or when served by caterers, providing that all requirements of applicable City ordinances are satisfied.
(16)
Chlorine demand in such quantities as to constitute a significant load on the wastewater facilities or which may cause the effluent from the City's wastewater treatment facilities to violate any State or Federal rules, regulations or permit requirements including, but not limited to, National Pollutant Discharge Elimination System (NPDES) permits.
(17)
Concentrations of BOD or TSS or NH3-N which exceed specific threshold values without payment of a surcharge to cover the additional costs of treatment. The current threshold value for BOD is 300 mg/l and for TSS is 325 mg/l and for NH3-N is 20 mg/l. Payment of a surcharge does not prevent the City from initiating any actions available under § 355-29 below, when the City determines that any other general discharge limitations are violated. Furthermore, payment of a surcharge shall not constitute an affirmative defense to any action taken pursuant to § 355-29 below.
(18)
Any substance which may cause the POTW's residues, sludges or scums to be unsuitable for reclamation and reuse or to interfere with the reclamation process. In no case shall a substance discharged to the POTW cause the POTW to be in noncompliance with sludge use or disposal criteria, guidelines or regulations developed under Section 405 of the Act;[1] any criteria, guidelines or regulations developed under Section 405 of the Act; any criteria, guidelines or regulations affecting sludge use or disposal developed pursuant to the Solid Waste Disposal Act, the Clean Air Act, the Toxic Substances Control Act,[2] or other Federal or State criteria applicable to the sludge management method being used.
(21)
Wastewater causing two readings on an explosion hazard meter at the point of discharge into the POTW, or at any point in the POTW, of more than 5% or any single reading over 10% of the lower explosive limit of the meter. Materials include, but are not limited to: gasoline, benzene, naphtha, fuel oil, paint products, kerosene, toluene, xylene, ethers, ketones, aldehydes, peroxides, chlorates, perchlorates, bromates, carbides, hydrides, sulfides, or any other flammable or explosive substances which the City, the Pennsylvania Department of Environmental Protection or the Environmental Protection Agency has notified the user is a fire hazard or a hazard to the City POTW.
(22)
Discharges prohibited by State or Federal regulations.
(23)
Maximum Allowable Industrial Loadings ("MAILs") for the specific pollutants of concern, as approved by the United States Environmental Protection Agency (EPA), are hereby established as set forth below. Individual limitations may be allocated to an Industrial User as needed through Industrial Waste Discharge Permits issued in accordance with Article IV of this Part 3. MAILs may be adjusted from time to time by Resolution adopted by the Township Board of Supervisors.
Parameter | Daily Maximum Allowable Industrial Loadings Pounds Per Day |
|---|---|
Arsenic | 6.82 |
Cadmium (as Cd) | 1.16 |
Chromium | 15.28 |
Copper (as Cu) | 8.19 |
Cyanide, free | 2.46 |
Cyanide, total | 14.50 |
Lead | 4.35 |
Mercury | 0.008 |
Molybdenum | 6.67 |
Nickel (as Ni) | 49.45 |
Phenolics, total | 9.51 |
Selenium | 2.37 |
Silver | 8.93 |
Zinc (as Zn) | 30.29 |
C.
When the City determines that a user(s) is contributing to the POTW any of the above enumerated substances in such amounts as to interfere with the operation of the POTW, the City may:
(1)
Advise the user(s) of the impact of the contribution on the POTW;
(2)
Develop effluent limitation(s) for such user to correct the interference with the POTW; or
(3)
Proceed with enforcement pursuant to the provisions of this part. Pollutants, substances or wastewater prohibited by this section shall not be processed or stored in a manner that they could be discharged to the POTW.