The purpose of the institutional zone is to provide for a range of governmental and municipal uses.
(Ord. 24-05, 6/5/2024)
In the institutional zone the following uses and their accessory uses are permitted outright:
A. 
Community buildings and areas which provide for educational or cultural activities;
B. 
Museums; and
C. 
Reload facility.
(Ord. 24-05, 6/5/2024)
The following uses and their accessory uses may be permitted subject to the provisions of Chapter 17.86:
A. 
Public parking facility;
B. 
Sewage treatment facility;
C. 
Wood waste processing, not including a building;
D. 
Public restroom;
E. 
Recycling facility;
F. 
Public school;
G. 
Pump station or other similar facility;
H. 
Public park or publicly owned recreation area;
I. 
Public works shop or yard;
J. 
Dog impound facility; and
K. 
Community garden, which satisfies the requirements of Section 17.86.130.
(Ord. 24-05, 6/5/2024)
In an IN zone, the following standards shall apply except as they may be modified through the design review process pursuant to Chapter 17.70:
A. 
Setbacks. Structures adjoining another zone or public right-of-way shall be set back 25 feet. No parking shall be permitted in this setback. Existing structures, at the time of adoption of the ordinance codified in this title, shall maintain their setbacks. Where parking occurs in the setback area, such use may continue.
B. 
Building Height. Maximum height of a structure is 28 feet, measured as the vertical distance from the average elevation of existing grade to the highest point of a roof surface of a flat roof, to the top of a mansard roof or to the mean height level between the eaves and the ridge for a pitched roof. The ridge height of a pitched roof shall not exceed 36 feet.
C. 
Signs. As allowed by Chapter 17.62.
D. 
Parking. As allowed by Section 17.68.020.
E. 
Access. The provision of consolidated street access points shall be considered in site design. Street access should be located to minimize the impact on adjacent residential areas.
F. 
Design Review. All uses shall be evaluated under Chapter 17.70, Design Review.
(Ord. 24-05, 6/5/2024)