The PD planned development district is intended to provide for four distinct types of applications requiring planning and site plans, but with differing standards. It is designated by a base district designation with a "PD" suffix. The four types of applications are:
(1)
Redevelopment of fully developed nonresidential property (RD);
(2)
New residential development (R);
(3)
New nonresidential development and new development of nonresidential uses combined with residential uses (NR); and
(4)
Residential infill development (RI).
Such planned development designations shall only be used with base districts with appropriate regulations to permit flexibility in the use and design of land and buildings in situations where modification of specific base district regulations is not contrary to its intent and purpose, or significantly inconsistent with the planning on which it is based and will not be harmful to the community. While great flexibility is given to provide special restrictions which will allow development not otherwise permitted, procedures are established herein to insure against misuse of the increased flexibility. The PD suffix for PD districts created after October 1, 2002, shall include the type "(RD), (R), or (NR)" PD application. The PD districts created after August 1, 2004, shall include the type (RD), (R), (NR) or (RI) PD application.
(Ordinance 1874, art. 5, § 520(A), adopted 3/22/1993; Ordinance 2493, § 1, adopted 7/24/2000; Ordinance 2559, § 1, adopted 6/25/2001; Ordinance 2647, § 1, adopted 10/28/2002; Ordinance 2820, § 1, adopted 2/14/2005)