This chapter shall be called "RA-1 Residential Attached Zone."
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
This chapter shall apply to all uses and developments in areas zoned RA-1.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
The RA-1 zone is intended to implement the RA comprehensive plan designation by accommodating a variety of small scale attached residential buildings such as duplexes, townhomes, small multiunit buildings, and related accessory uses. Other uses may also be permitted in limited circumstances when consistent with the goals and policies of the comprehensive plan. RA-1 zone is intended to provide a transition in scale between lower density, detached residential areas and areas of more intensive development. It is generally applied to areas characterized by a pattern of small lots, fragmented property ownership, or a mix of attached and detached dwellings. It can also be applied to areas within walking distance of schools, parks, or commercial services that lack the infrastructure to support more intensive forms of residential development.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
Buildings, structures, and lots in the RA-1 zone shall only be used for the following, unless otherwise provided for in this title:
A.
Duplex dwellings;
B.
Horizontally attached dwellings;
C.
Small multiunit buildings;
D.
Detached dwellings;
E.
Small boarding houses;
F.
Small commercial child day care center;
G.
Small utilities.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
The following buildings, structures, and uses are permitted accessory uses in the RA-1 zone. Accessory uses shall only be permitted when associated with, and incidental and subordinate to, a legally established primary use.
A.
Normal Residential Appurtenances. The following uses and structures may be authorized as an accessory use in conjunction with a dwelling: garage, guest cottage, recreation room, storage shed, noncommercial greenhouse, swimming pool, decks, patios, driveway, on-site utilities and utility connections, fences, and solar panels;
B.
Keeping of not more than six household pets, four of which may be dogs, kept in the home. This limit shall not include birds, fish or suckling young of pets;
C.
Family day care services;
D.
Foster family care services;
E.
Accessory dwelling units;
F.
Urban agriculture;
G.
Telecommunication micro facility, subject to the following requirements, except as limited by the Telecommunications Act of 1996 as amended:
1.
Micro facility shall be located on existing buildings, poles or other existing support structures. A micro facility may locate on buildings and structures; provided, that the interior wall or ceiling immediately adjacent to the facility is not designated residential space.
2.
Antennas equal to or less than four feet in height (except omnidirectional antennas which can be up to six feet in height) and with an area of not more than 580 square inches in the aggregate (e.g., one-foot diameter parabola or two-foot by one-and-one-half-foot panel as viewed from any one point) are exempt from the height limitation of the zone in which they are located. Structures which are nonconforming with respect to height may be used for the placement of omnidirectional antennas providing they do not extend more than six feet above the existing structure. Placement of an antenna on a nonconforming structure shall not be considered to be an expansion of the nonconforming structure.
3.
The micro facility shall be exempt from design review if the antenna and related components are the same color as the existing building, pole or support structure on which it is proposed to be located.
4.
The shelter or cabinet used to house radio electronic equipment shall be contained wholly within a building or structure, or otherwise appropriately concealed, camouflaged or located underground.
5.
Micro facilities for a specific wireless provider shall be separated by a distance equal to or greater than 1,320 linear feet from other micro facilities of the same wireless provider.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
The following uses shall require a conditional use permit:
A.
Large boarding houses;
B.
Medium multiunit buildings;
C.
Small meeting facilities;
D.
Small private schools;
E.
Large commercial child day care centers;
F.
Medium utilities;
G.
Accessory buildings with a footprint greater than 800 square feet;
H.
Small nursing homes.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
A.
Manufactured Homes. Manufactured homes may be placed on any lot in an RA-1 zone and regulated in accordance with the same standards and requirements applicable to site-built detached homes, except that the following additional regulations shall apply. These standards and requirements do not apply to legally established, nonconforming manufactured homes or manufactured homes placed within a manufactured home park.
1.
The manufactured home shall be set upon a permanent foundation, as specified by the manufacturer, and the space between the bottom of the home and the ground shall be enclosed by concrete or an approved concrete product which may be either load bearing or decorative;
2.
The manufactured home shall have been originally constructed with and shall now have a composition or wood shake or shingle, coated metal, or similar roof of nominal 3:12 pitch;
3.
The manufactured home shall have exterior siding similar in appearance to siding materials commonly used on conventional site-built Uniform Building Code single-family residences;
4.
The placement of the manufactured home shall be consistent with all other regulatory requirements generally applicable to new homes.
B.
Rural agricultural uses are not permitted.
C.
No trailer, recreational vehicle, boat, camping trailer, fifth wheel, camper, van, car, or other similar type of mobile unit that is not a permanent structure attached to the ground, shall be used as a place of habitation or as a dwelling. Only site-built structures which comply with all applicable building code requirements and manufactured or modular homes which meet applicable state or federal standards for use as a dwelling unit may be used as a place of habitation or as a dwelling.
D.
Junk storage is only permitted outdoors when completely surrounded by a solid, site-obscuring fence and not visible from an adjoining street or public right-of-way. Outdoor storage shall also be subject to the following additional restrictions and requirements:
1.
Litter, trash, used appliances, used interior furnishings and discarded exterior furnishings and similar items are prohibited outdoors regardless of location.
E.
Where alley access is available, off-street parking spaces and garages shall be accessed from the alley and no curb cuts shall be permitted. This requirement shall apply to all land divisions, the construction of new homes and accessory buildings, and requests for curb cuts to serve existing homes and accessory buildings.
F.
Heat pumps or other noise-producing mechanical equipment shall only be permitted within 10 feet of a property line abutting another lot if all equipment shall be equipped with a noise-baffling screen so that there shall be no audible sound at the property line.
G.
New subdivisions or developments that will result in 40 or more lots or dwellings shall include a common open space area for outdoor recreation.
H.
Larger Residential Buildings. The following requirements shall apply to multiunit or townhouse buildings that contain more than four dwelling units:
1.
Except as authorized as part of a cluster development, medium multiunit buildings may only be permitted on lots within 1,320 feet (travel distance) of a school, park, bus route, or commercially zoned parcel;
2.
Buildings shall be designed by a licensed architect and detailed elevation drawings shall be provided with the conditional use permit application;
3.
For horizontally attached dwellings, each unit shall have frontage on a public or private street and shall have its own exterior entrance. Each unit's primary exterior entrance shall face the street and direct pedestrian access to the street shall be provided;
4.
Primary building entrances shall incorporate a covered porch or landing with a minimum area of 20 square feet and a minimum depth of three feet;
5.
A consolidated garbage and recycling area shall be provided and shall be screened from view in accordance with the applicable landscaping standard;
6.
The maximum building length shall not exceed 180 feet;
7.
Horizontally attached units shall incorporate design features that clearly identify each dwelling unit as individual residences such as a change in materials, color, articulation, rooflines, gables orientation, or other similar architectural techniques;
8.
Each building shall include architectural design elements or materials intended to break up the mass of the building and provide greater compatibility with the scale and appearance of surrounding residential structures. At a minimum all buildings must incorporate at least three of the following design elements:
a.
Modulations along the front facade at intervals of no more than 30 feet. Each modulation shall step the facade back or forward by at least four feet;
b.
Changes in the roofline at intervals of no more than 30 feet, such as variations in roof pitch, overhangs, projections, or extended eaves;
c.
Include at least two dormers with a minimum width of three feet;
d.
Include at least two balconies on front facade. Balconies shall have a minimum depth of six feet between the building wall and the balcony railing;
e.
For buildings with more than one floor, reduce the area of the upper floor so that its area is less than that of the first floor. To receive credit for this design element, the front building wall on the upper floor shall be stepped back from the first floor a minimum of two feet. The portion of upper floor stepped back from the first floor shall have a minimum width of eight feet. Uncovered, or covered unenclosed, balconies can be used to receive credit for this design element provided they satisfy the minimum dimensional requirements of this provision;
f.
Use trim with a minimum depth of three-quarters inch and a minimum width of three and one-half inches to mark rooflines, windows, and doors.
I.
Accessory Dwelling Units. The following standards shall apply to accessory dwelling units (ADUs):
1.
Type. ADUs may be attached to the primary dwelling or be located in an accessory building;
2.
Number. One accessory dwelling unit is permitted for each primary dwelling;
3.
Maximum Size.
a.
Detached: 1,000 square feet, exclusive of any area used as a garage, carport, or covered patio. In all cases detached ADUs shall comply with the size limits applicable to accessory buildings identified in this section;
b.
Attached: 1,000 square feet or 30 percent of the floor area of the primary dwelling, whichever is less; provided, that in all cases at least 500 square feet may be permitted;
4.
Design Standards.
a.
Entrances and addressing: Separate entrances shall be provided for the primary dwelling and the ADU. The ADU entrance shall be oriented so that it faces a different direction than the entrance to the primary dwelling. ADUs shall be assigned their own address.
b.
Setbacks: Detached ADUs shall comply with the setback standards applicable to accessory buildings identified in this chapter.
c.
Access: Direct pedestrian access shall be provided between the ADU and a street or alley;
5.
Tenure and Ownership. The ADU must be located on the same lot as the primary dwelling it is associated with and may not be separately sold.
J.
Nonresidential Uses. The following standards shall apply to schools, meeting facilities, and commercial day care centers, and other nonresidential uses other than utilities:
1.
Schools, meeting facilities, and commercial day care centers shall be located on a corner lot and adjoin an arterial street;
2.
The total building footprint shall not exceed 2,500 square feet;
3.
Parking areas shall not be located between the building and the street and shall be completely screened from view with landscaping and fencing;
4.
Outdoor play areas shall be screened from adjacent streets and residences with landscaping and fencing;
5.
The lot on which the nonresidential use will be located shall have an area of at least 10,000 square feet;
6.
Flat roofs are prohibited. Roofs shall have a pitch of no less than 4:12;
7.
The primary exterior entrance shall face the street and direct pedestrian access shall be provided between the entrance and the street.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
A.
B.
Minimum Setback Requirements.
2.
Street side: 10 feet.
3.
Side: five feet.
4.
Rear: 20 feet.
5.
Alley: zero feet.
6.
Setback Exceptions.
a.
Accessory buildings, small lots, and cluster developments shall be subject to the setback requirements outlined in the applicable sections of this chapter;
b.
When authorized pursuant to this chapter, no property line setback shall apply to the common walls of zero lot line structures or horizontally attached dwellings;
C.
Maximum Building and Impervious Surface Coverage.
D.
Maximum building height: 35 feet.
E.
Accessory buildings and structures shall comply with all of the requirements of this chapter except as follows:
1.
Maximum height: 25 feet;
2.
Maximum building footprint: 800 square feet; provided, that open uncovered decks and patios shall not be subject to this limit and larger buildings may be permitted with a conditional use permit;
3.
Maximum rear yard coverage: Accessory buildings and structures shall not cover more than 50 percent of the required rear yard setback area;
4.
Minimum Setback Requirements.
a.
Front: 17 feet; provided, that no accessory building shall be located closer to the front property line than the primary structure it is associated with;
b.
Side: five feet except no property line setback shall apply to the common walls of zero lot line structures;
c.
Street side: 10 feet;
d.
Rear: five feet;
e.
Alley: zero feet.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)
Cluster developments may be permitted through a subdivision or short subdivision process. A variety of building types and site layouts may be authorized and alternative standards for lot width, lot depth, lot area, building and impervious surface coverage, and property line setbacks may be employed. Cluster developments shall comply with all of the requirements of this chapter except as follows:
A.
Permitted housing types may include, but are not limited to, detached dwellings, townhouses, multiunit buildings, cottage housing, zero lot line development, or a combination of housing types.
B.
The maximum allowable density of a cluster development may be averaged across the entire site. The maximum permitted density shall not exceed 38 dwelling units per acre. Accessory dwelling units shall be excluded from maximum density calculations.
C.
When the building or impervious surface coverage of individual lots exceeds the permissible limits for the zone in which the development is located, additional open space areas shall be set aside so that the total coverage of development is consistent with the coverage limits prescribed by the underlying zone.
D.
The resulting subdivision or short subdivision design shall clearly retain a substantial area of continuous, publicly accessible open space, wetlands, areas adjacent to wetlands, steep slopes, geologically hazardous areas, wildlife habitat areas, or other critical areas. Cluster developments may also be authorized if the resulting open space area(s) is used for nonstructural low impact development features, such as bioretention areas, which mimic natural environmental and hydrologic processes. All such low impact development features shall be extensively landscaped using native vegetation. The following minimum open space requirements shall apply to cluster developments:
E.
Lot Width. The standard requirement for minimum lot width shall be 30 feet. Lot widths may be reduced to 15 feet in the following circumstances:
F.
Restrictive plat notes shall be included identifying the approved building types and densities.
G.
Open space areas created through a cluster development shall be placed within separate tracts.
H.
Restrictive notes shall be included on the face of the plat, or short plat, limiting future use and development of open space tracts to uses and developments that are consistent with the intended purpose of the open space tracts.
(Ord. 1857 § 2 (Exh. B), 2018; Ord. 1933 § 1 (Exh. A), 2023)