The purpose of this section is to establish procedures and standards for a design review process to promote excellence in site planning and building design, to encourage the harmonious appearance of buildings and sites, to ensure that new and modified uses will be compatible with the existing and potential development of the surrounding area, to ensure that projects comply with the design standards and intent of specific plans, and to produce an environment of stable and desirable character.
A. Review and Approval. Design review shall be processed as follows:
1. Review and Approval. All applicants shall submit materials for design review as outlined on the Community Development Department application forms. As outlined in Table 18.68-1, the Community Development Director may approve up to four (4) residential units. Planning Commission approval is required for residential projects consisting of five (5) or more units and all commercial buildings/shopping centers greater than one hundred thousand (100,000) square feet in gross floor area.
2. Exemptions.
a. Design review shall not be required for interior building remodels, minor alterations of building exteriors, or minor repair and maintenance of structures or parking areas.
b. Up to two (2) single-family dwellings on infill lots not within a previously approved subdivision.
c. Expansions of the same or substantially similar use less than twenty-five percent (25%) of gross floor area of the principal buildings (including air space) in any eighteen (18) month period.
B. Basis for Approval. The Community Development Director or Planning Commission, as determined in Table 18.68-1, shall approve or conditionally approve design review if he/she finds the proposed use to be in full conformance with all the following requirements:
1. Exterior Building Design. The exterior building design, including construction materials and color, shall be compatible with the surrounding neighborhood.
2. Additional development standards for multiple-family and nonresidential development shall comply with the following standards:
a. Location and Position of Uses and Buildings on a Site. The location and position of uses and buildings on a site shall provide for an appropriate use of space on the site and shall be compatible with the surrounding vicinity.
b. Site Security. The developer shall provide security equipment and procedures sufficient to ensure public safety at all times, as determined by the Galt Police Department.
c. Exterior Lighting. The developer shall provide exterior lighting sufficient to illuminate entire site.
3. Drainage Facilities and Utilities. All storm drainage facilities shall be placed underground in conformance with City standards. All utility distribution facilities installed in and for the purpose of supplying service shall be placed underground, except equipment appurtenant to underground facilities, such as surface-mounted transformers, pedestal-mounted terminal boxes, meter cabinets, and concealed ducts. The developer is responsible for complying with the requirements of this section and shall make the necessary arrangements with the utility companies involved in the installation of said facilities.
4. Applicable specific plan requirements.
5. Galt Landscape Design Guidelines.
6. Applicable provisions found in the Galt Municipal Code and all applicable standards and specifications not otherwise included in this code.
C. Terms and Conditions. Terms and conditions for approval of a design review are as follows:
1. Imposition of Conditions. Any approval of a design review may include such terms and conditions as deemed necessary or appropriate by the Community Development Director or Planning Commission to effect the purpose of this code. If no additional terms or conditions are specified, the design approval shall be considered unconditional and valid for the period set forth in subsection (C)(2) of this section.
2. Time Limits and Commencement of Development. The development for which a design review approval has been granted pursuant to this code shall commence and be diligently pursued to completion by obtaining a building permit and commencing construction under the terms and time limits of that building permit within one (1) year of the granting of the design review approval. If the development has not commenced or been diligently pursued to completion within one (1) year, the approval shall automatically expire. Prior to the expiration of the permit, the applicant may apply for a single one (1) year extension.
D. Revocation and Modifications. Any design review approved pursuant to this section may be revoked or modified pursuant to Section
18.68.070.
(Ord. 2015-05, Repealed and Replaced, 06/16/2015)