Except as provided herein, the 2025 Edition of the State of California Plumbing Code (California Code of Regulations, Title 24, Part 5) based in the 2024 Uniform Plumbing Code, including any amendments and appendices thereof, as promulgated and published by the International Association of Plumbing and Mechanical Officials, is hereby adopted by reference as though fully set forth herein, and shall constitute and is hereby established as “the Plumbing Code of the City of South Gate” (“Plumbing Code” herein). Requests to review the 2025 Edition of the California Plumbing Code are available through the City Clerk’s Office.
(Ord. 2137 § 6 (part), 4-8-2003; Ord. 2244 § 5 (part), 11-27-2007; Ord. 2245 § 5 (part), 1-8-2008; Ord. 2277 § 5 (part), 11-23-2010; Ord. 2311 § 5 (part), 11-26-2013; Ord. 2332 § 5 (part), 11-22-2016; Ord. 2020-02-CC § 5 (part), 5-26-2020; Ord. 2022-10-CC § 5, 11-29-2022; Ord. 2026-04-CC, 5/12/2026)
Any person violating any of the provisions of the California Plumbing Code shall be deemed guilty of a misdemeanor, and each such person shall be deemed guilty of a separate offense for each and every day, or portion thereof, during which any violation of any provision of the California Plumbing Code is committed, continued or permitted. Upon conviction, any such violation shall be punishable as provided for in Title 1 of this Code.
(Ord. 2137 § 6 (part), 4-8-2003; Ord. 2020-02-CC § 5 (part), 5-26-2020; Ord. 2022-10-CC § 5, 11-29-2022; Ord. 2026-04-CC, 5/12/2026)
Notwithstanding the provisions of Section 9.05.010, the 2025 Edition of the California Plumbing Code is hereby amended by:
A. 
Adding a new subparagraph 1014.3.4.4 (Outdoor Location) to subsection 1014.3.4 (Location) of Chapter 10 (Traps and Interceptors) of the Plumbing Code to read as follows:
1014.3.4.4 Outdoor Location
Each new grease trap shall be on the outside of all structures on the premises and shall be readily accessible for servicing and maintaining the grease trap in working and operation condition. The use of ladders or the removal of bulky equipment in order to service grease traps shall be deemed to be a lack of accessibility. The location of all grease traps in the interior of a building or structure shall be permitted by the building official only when, in his judgment, there is insufficient space on the exterior of a building or structure to install an adequate grease trap. As used herein, the term “adequate grease trap” shall mean a grease trap of sufficient capacity to intercept anticipated quantities of grease generated by a business over at least a twenty-four (24) hour period.
(Ord. 2137 § 6 (part), 4-8-2003; Ord. 2244 § 5 (part), 11-27-2007; Ord. 2245 § 5 (part), 1-8-2008; Ord. 2277 § 5 (part), 11-23-2010; Ord. 2311 § 5 (part), 11-26-2013; Ord. 2332 § 5 (part), 11-22-2016; Ord. 2020-02-CC § 5 (part), 5-26-2020; Ord. 2022-10-CC § 5, 11-29-2022; Ord. 2026-04-CC, 5/12/2026)