The intensity and density bonus listed in the table below preempts the corresponding development standards listed for each zoning district in Division
II of this title, Zoning Districts, when a subdivision is designed and implemented using the anti-monotony standard in Chapter
18.156 AMC, Design Standards.
Only the zoning districts shown in the table below are applicable for an intensity and/or density bonus.
Townhouse Subdivision Intensity and Density Bonus for Anti-Monotony Compliance |
|---|
| Zoning District |
|---|
R4 | R5 |
|---|
Lot Standards |
Min. Lot Area | 2,200 sq. ft. | 2,200 sq. ft. |
Min. Average Lot Area | 2,600 sq. ft. | 2,600 sq. ft. |
Min. Lot Width | 20 ft. | 20 ft. |
Min. Average Lot Width | 26 ft. | 26 ft. |
Setback Standards |
Min. Front Setback | 24 ft. | 20 ft. |
Min. Side Setback | 0 ft. | 0 ft. |
Min. Rear Setback | 20 ft. | 20 ft. |
Min. Building Separation* | 30 ft. | 30 ft. |
Other Standards |
Max. Lot Coverage | 50% | 70% |
Min. Dwelling Unit Size | 1,200 sq. ft. | 1,000 sq. ft. |
Min. Average Dwelling Unit Size | 1,400 sq. ft. | 1,200 sq. ft. |
Maximum Density | 7 du/acre | 9 du/acre |
Notes: |
|---|
* Separation from another block of townhouses, not each individual unit. |
(Ord. 1746-2023; Ord. 1352-2010; Ord. 1286-2008; UDO § 6.14)