(1) 
All decorative street light installations shall be Philips Lumec Renaissance Series color BRTX (textured bronze) or approved equal, and shall include the following, or latest model:
(a) 
Philips Lumec Renaissance Series fixture product number RN20-(90 or 135)W80LED-ACDR-LE3R-240-BRTX.
(b) 
Philips Lumec pole product number SSM8V-25-BRTX including pole, access door, plant support, decorative cover, ballast module, ballast tray, weld cover, base cover and GFCI receptacle.
(c) 
Philips Lumec Renaissance Series mounting arm product number NMIA-RNA-BRTX.
(d) 
Philips Lumec Renaissance Series pedestrian scale lighting may also be required and shall be determined based upon projects details specific to the location pedestrian sidewalk and/or multi-use path design. This product may include a standalone decorative pole with fixture or a decorative arm and fixture mounted on the decorative street light pole.
(2) 
Decorative street light standards shall be furnished and installed in accordance with the methods and materials noted in the applicable standard plans, preapproved plans, or special design plans. All welds shall comply with the latest AASHTO Standard Specifications for Support of Highway Signs, Luminaires, and Traffic Signals. Welding inspection shall comply with Section 6-03.3(25)A, Welding Inspection.
(3) 
All decorative street light standards shall meet the following:
(a) 
All poles and arms shall be round tapered steel.
(b) 
All lamps and electrical components shall be accessible without tools.
(c) 
Optical systems shall be IP66 rated.
(d) 
Luminaires shall incorporate LED lamps with an L70 rated LED lamp and driver life of 100,000 hours or greater.
(e) 
LED lamps shall have a color temperature of 4000K (+/- 350K).
(f) 
Decorative street light standards, luminaire arms, banner arms (if required), decorative bases, and visible mounting hardware shall be of the color BRTX (textured bronze) with a powder coating.
(g) 
Bolts shall be per manufacturer recommendation and installed per the plans and specifications.
(h) 
All poles shall have a hand hole for access to the tray-mounted ballasts.
(i) 
All standards shall be rated to withstand 100 MPH steady wind with a gust factor of 1.3.
(j) 
Bolt circle allowed shall be 11 inches at 13 inches.
(k) 
All poles and luminaire arms shall incorporate decorative elements identical to or similar to those shown within the plans.
(4) 
Every other (a minimum of 50 percent of installed) decorative street light standard shall meet the following:
(a) 
Have a 120-volt, built-in duplex GFCI receptacle outlet installed at the top of the pole. The GFCI receptacle outlet circuit shall be placed on a 20-amp minimum circuit. The GFCI receptacle outlets shall be inspected utilizing a standard off-the-shelf GFCI receptacle tester, prior to project completion, by the contractor in the presence of the city signal technician or city electrical inspector. GFCI outlets which fail the test shall be replaced by the contractor and retested by the contractor in the presence of the city signal technician or city electrical inspector.
(b) 
Have banner arms permanently mounted at a height of 20 feet and banner arms mounted to an adjustable clamp assembly at a height of 12 feet. Banner arms shall be 36 inches long and have a three-inch ball at the end.
(c) 
Banner arm mounts and duplex GFCI receptacle outlets shall be oriented 180 degrees from the steel arms of the luminaire.
(5) 
Decorative street light standards shall be engineered by the pole manufacturer. Drawings shall be stamped by a licensed structural engineer with current valid State of Washington stamp. The foundation shall be engineered by a licensed structural engineer using pole manufacture data and project supplied soils testing report. Engineered/stamped plans by a currently licensed structural engineer shall be submitted to the project engineer. Foundation work and pole manufacture shall not commence until engineered plans have been approved by the project engineer. All poles shall be circular in cross-section.
(6) 
After delivering the standards to the job site and before they are installed, they shall be stored in a place that will not inconvenience the public. All standards shall be installed in compliance with Washington State Utility and Electrical Codes.
(7) 
Factory approved touch-up paint of color BRTX (textured bronze) in the quantity of one unopened gallon shall be supplied to the city prior to project completion.
Figure 48 – Decorative street lighting required in the Lakewood neighborhood
(Ord. 3265 § 3 (Exh. A), 2023)