There is established a uniform system of numbering properties and principal buildings. There shall be one location number for each ten feet of property frontage, wherever possible, starting at the baseline (normally the center of the adjoining street) with number one and continuing with consecutive hundreds at each intersection wherever possible. Structures will be numbered according to the road or street they face (front of structure), with the middle of the structure determining the number. The exception is when the structure cannot be seen from the road, then the driveway shall be numbered and addressed on the street/road from which it departs. The city adopts a nominal three-hundred-seventy-seven-foot block grid system in unplatted areas, and where a street is interrupted or does not continue through, the block shall be considered to be three hundred seventy-seven feet with measuring to begin anew each mile to remove irregularities. Where an unplatted area adjoins a currently platted area with a different block size, the grid and location number spacing shall be adjusted to establish continuity with the platted area. A grid map shall be developed by the city, copies of which shall be filed with the city clerk/treasurer and the director of public works. The grid map shall be modified whenever a subdivision is platted within the city limits. Buildings on short plats shall be numbered within the grid existing at the time of the plat.
(Ord. 745 § 1 (part), 1997)