[Ord. 10-1241B, § 5]
A.
Each city or county developing or amending a TSP shall specify the general locations and facility parameters, such as minimum and maximum ROW dimensions and the number and width of traffic lanes, of planned regional transportation facilities and improvements identified on the appropriate RTP map. The locations shall be within the general location depicted in the appropriate RTP map. Except as otherwise provided in the TSP, the general location is as follows:
1.
For new facilities, a corridor within 200 feet of the location depicted on the appropriate RTP map;
2.
For interchanges, the general location of the crossing roadways, without specifying the general location of connecting ramps;
3.
For existing facilities planned for improvements, a corridor within 50 feet of the existing right-of-way; and
4.
For realignments of existing facilities, a corridor within 200 feet of the segment to be realigned as measured from the existing right-of-way depicted on the appropriate RTP map.
B.
A city or county may refine or revise the general location of a planned regional facility as it prepares or revises its TSP. Such revisions may be appropriate to reduce the impacts of the facility or to comply with comprehensive plan or statewide planning goals. If, in developing or amending its TSP, a city or county determines that the general location of a planned regional facility or improvement is inconsistent with its comprehensive plan or a statewide planning goal requirement, it shall:
1.
Propose a revision to the general location of the planned facility or improvement to achieve consistency and, if the revised location lies outside the general location depicted in the appropriate RTP map, seek an amendment to the RTP; or
2.
Propose a revision to its comprehensive plan to authorize the planned facility or improvement at the revised location.