Maximum density | 8 dwelling units per gross acre. |
Minimum lot area | To be determined through the PD review process – see Chapter 22.76 FMC. |
Maximum height | 35 feet. Exceptions may be authorized per FMC § 22.58.007 and through the PD review process – see Chapter 22.76 FMC. |
Minimum and maximum front yard, interior side yard, side street side yard, and rear yard setback | Setbacks and allowable encroachments to be determined through the PD review process – see Chapter 22.76 FMC. If not specified, FMC § 22.58.002 encroachment standards will apply. |
Exterior wall modulation | Building elevations greater than 40 feet in length, measured horizontally, shall incorporate wall plane projections or recesses having a depth of at least 4 feet for front and side street side yard elevations of single-family dwellings, and 6 feet for all elevations of all other buildings. The projections or recesses shall extend at least 20% of the length of the elevation. No uninterrupted length of any elevation shall exceed 40 horizontal feet. See FMC § 22.64.009 for an illustration of this requirement. |
Articulation | Building elevations exceeding 20 feet in length, measured horizontally, shall incorporate a minimum of 2 articulation components, such as a stoop, porch, chimney or other substantial projections, windows, multiple contrasting siding materials, or substantial trim including a belt course, to visually and/or functionally break up flat, blank or undifferentiated elevations. Building elevations greater than 30 feet in length, measured horizontally, and exceeding 12 feet in height, measured from finished grade to top of wall where it connects to roof structure, shall incorporate a minimum of 3 articulation components. |
Accessory building standards | To be determined through the PD process – see Chapter 22.76 FMC. If not specified, FMC § 22.58.003 standards will apply. |
Maximum lot coverage for structures | To be determined through the PD review process – see Chapter 22.76 FMC. |
Maximum impervious surface coverage | 65% of the developable site area for all structures and other impervious surfaces combined. |
Development not subject to planned development approval | For development that is not subject to planned development approval, or for modifications to existing development constructed prior to adoption of planned development requirements, lot size, setbacks, lot coverage and impervious surface area coverage shall comply with the development standards in FMC § 22.36.005 (R-6 zone). |
Additional specific use and structure regulations | |
Parking and circulation | |
Landscaping regulations | |
Design standards | See Chapter 22.64 FMC. Site-specific design guidelines may be required as part of planned development approval. See also multifamily design standards and guidelines adopted by reference in Chapter 22.63 FMC. |
Critical areas | |
Calculations resulting in a fraction shall be rounded to the nearest whole number with .50 being rounded up. |
(Ord. 1246 § 5, 2000; Ord. 1272 § 4, 2001; Ord. 1311 § 5, 2002; Ord. 1562 § 12, 2015; Ord. 1611 § 8, 2018)