The individual described in Sections (1)-(3) of this definition may designate another authorized representative if the authorization is in writing; the designation specifies the individual or position responsible for the overall operation of the facility from which the discharge originates, or having overall responsibility for environmental matters for the company; and the written authorization is submitted to the PWD. Best Management Practices or BMP's schedules activities, prohibitions of practices, maintenance procedures and other management practices to implement the prohibitions listed in Sections
13.17.030A and
B and 40 CFR Part
403.5(a)(1) and
(b). BMPs also include treatment requirements, facility improvements, operating procedures and practices to control plant site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.
Biochemical Oxygen Demand or BODThe quantity of oxygen utilized in the biochemical oxidation of organic matter under the standard laboratory procedures for five (5) days at 20 degrees centigrade usually expressed as a concentration (e.g. mg/l).
BiosolidsWastewater sludge after treatment to meet federal and state regulations and intended disposal criteria.
Castle Rock City Council (CRCC)An administrative body that operates as a public agency under State of Washington Law, providing wastewater management and reclaimed water production services for the City of Castle Rock and the sewer service area, defined in the Rural Transition Area, and agreement between the City of Castle Rock and Cowlitz County, dated December 17th, 2019.
Categorical Industrial User or CIUAn Industrial User subject to Categorical Pretreatment Standard or Categorical Standard. Such Industries are regulated by the Washington State Department of Ecology (WA DOE) and receive permits from the Washington State Department of Ecology.
Categorical Pretreatment Standard or Categorical StandardAny regulation containing pollutant discharge limits promulgated by the USEPA in accordance with Sections 307(b) and (c) of the Act (33 US.C. Section 1317), which apply to a specific category of Users and which appear in
40 CFR Chapter I, Subchapter N, Parts 405-471.
Composite Samplecomposite of several taken throughout the period of a day when a regulated discharge is occurring. Several brands of automated samplers, some with a refrigerated sample collection area, may be used, subject to the advance approval of the PWD. Approvable composite samplers may either use a flow paced or time paced algorithm. For example, collecting a same size aliquot every 1,000 gallons (flow paced), or a variable sized aliquot every hour (time paced). In both cases, they must interface with a device which senses the effluent flow volume to collect a representative sample unless the PWD has determined that a flow proportionate sample is not required.
CWDACity Wastewater Discharge Approval program whereby, all minor commercial users (MCU) and minor industrial users (MIU) discharging or proposing to discharge non-domestic wastewater into the City's wastewater collection system, are required to apply for and obtain approval. The approval will be based a completed application. The City will determine the extent of the pretreatment, testing, maintenance, and record-keeping that will be required.
Daily Limit or Daily Maximum LimitThe maximum allowable discharge of a pollutant over a calendar day or equivalent representative 24-hour period. Where daily maximum limits are expressed in units of mass, the daily discharge is calculated by multiplying the daily average concentration and total flow volumes in the same 24-hour period by a conversion factor to get the desired units. Where daily limits are expressed in terms of a concentration, the daily discharge is the composite sample value, or flow weighted average if more than one discrete sample was collected. Where flow weighting is infeasible, the daily average is the arithmetic average of all samples if analyzed separately, or the sample value if samples are composited prior to analysis.
Dischargethe introduction of pollutants into the collection system and/or POTW, directly or indirectly, from any non-domestic source regulated under Section 307(b), (c), or (d) of the Clean Water Act.
Domestic Sewage (Residential Sewage)Sewage which is similar in volume and characteristics to that produced from a single-family residential dwelling engaging in customary household activities. This includes up to 50 gpd volume with a concentration up to 350 mg/L of Biochemical Oxygen Demand, 350mg/L of Total Suspended Solids, and 44 mg/L Total Ammonia, 100 mg/L of any type of fats, oils or greases (FOG) or combination thereof. No sand, silt, heavy sediment that does not float, or: wipes, plastics or feminine hygiene products, needles or other similar products are allowed from any sector (residential, commercial or industrial) of the sewer service area are allowed to enter into the sanitary sewer system.
Domestic User/Residential UserAny person who contributes, causes, or allows the contribution of wastewater into the POTW that is of a similar volume and/or chemical make-up as that of a single-family residential dwelling unit. Discharges from a residential dwelling unit include up to 350 gpd with a concentration up to 50 mg/L of Biochemical Oxygen Demand, 350mg/L of Total Suspended Solids, and 44 mg/L Total Ammonia, 100 mg/L of any type of fats, oils or greases (FOG) or a combination thereof. No sand, silt, heavy sediment that does not float, or: wipes, plastics or feminine hygiene products, needles or other similar products are allowed from any sector (residential, commercial or industrial) of the sewer service area are allowed to enter into the sanitary sewer system. The Domestic User Classification is intended to cover apartment buildings and other multi-unit facilities which generally engage in food preparation activities within and serving only individual units.
Environmental Protection AgencyThe U.S Environmental Protection Agency or, where appropriate, the Regional Water Management Division Director, the Regional Administrator, or other duly authorized official.
Existing SourceAny source of discharge subject to Categorical Standards that does not meet the definition of a "New Source" per this section.
Grab SampleA sample, from a waste stream without regard to the flow in the waste stream and over a period of time not to exceed fifteen (15) minutes.
Industrial User or IUA User which utilizes water in the manufacture or processing of a product, or otherwise creates a sewer discharge that does not meet the criteria for domestic sewage. Industrial Users can be either industrial or commercial in nature and are further classified as a Categorical Industrial User, Significant Industrial User, Potential Industrial User, or Minor Industrial User of the POTW, depending on the volume and nature of their discharge.
Instantaneous Maximum Discharge Limit or Instantaneous LimitThe maximum concentration of a pollutant allowed to be discharged at any time, determined from the analysis of a discrete sample. Where a Use is required to take a grab sample for purposes of determining compliance with Local Limits, this standard is the same as the Daily Maximum standard.
InterferenceA Discharge that causes (either by itself or in combination with other discharges) a violation of POTW & NPDES Permit. This includes discharges that prevent the intended biosolids use or disposal by inhibiting or disrupting the POTW, including its collection systems, pump stations, waste water and sludge treatment processes; or plugs, degrades, damages, unreasonably reduces capacity, or otherwise harms or disrupts the operations, maintenance, and service life of the collection systems. For example, a discharge from a User which causes a blockage, resulting in a discharge at a point not authorized by City, is a violation of POTW NPDES Permit and this chapter.
Local LimitsEffluent limitation developed for Users by the PWD to specifically protect the POTW from the potential of pass through, interference, vapor toxicity, explosions, sewer corrosion, and intended biosolids uses. Such limits shall be based on the POTW's site-specific flow and loading capacities, receiving water and collection systems considerations, and reasonable treatment expectations for non-domestic wastewater. See section
13.17.030 (General Sewer Use Requirements) for a full list of Local Limits.
Medical WasteIsolation wastes, infections agents, human blood and blood products, pathological wastes, sharps, body parts, contaminated bedding, surgical wastes, potentially contaminated laboratory wastes, and dialysis wastes.
Monthly Average LimitThe limit to be applied to the Monthly Average to determine compliance with the requirements of this chapter (see section
13.17.030 for listing).
New SourceAll Industrial Users applying through a business license or a building permit that proposes to discharge into the City of Castle Rock's collection system. These users must fill out a Industrial User Survey for the PWD evaluation prior to discharging into the collection system. See Section
13.17.050A.
Pass ThroughA discharge which exits the POTW into waters of the United States in quantities or concentrations, which alone or in conjunction with a discharge or discharges from other sources, causes a violation of any requirement of the POTW NPDES permit, including an increase in the magnitude or duration of a violation.
PersonAny individual, partnership, co-partnership, firm, company, corporation, association, joint stock company, trust, estate, governmental entity, or any other legal entity; or their legal representatives, agents, or assigns. This definition includes all federal, state, and local government entities.
PHA measure of the acidity or alkalinity of a solution, expressed in standard units.
PollutantAny constituent in the wastewater that may degrade water quality in the receiving water to the quality of biosolids generated by the POTW, including but not limited to dredged spoils, solid waste, incinerator residue, filter backwash, sewage, garbage, sewage sludge, munitions, medical wastes, chemical wastes, biological materials, radioactive materials, heat, wrecked or discarded equipment, rock, sand, cellar dirt, municipal, agricultural and industrial wastes.
Potential Significant Industrial UserA user that does not meet the criteria of Significant Industrial User, but whose discharge may interfere with the POTW such that the PWD determines that the User must monitor and potentially pretreat its discharge.
PretreatmentThe reduction of the concentration of pollutants, the elimination of pollutants, or the alteration of the nature of pollutants in wastewater prior to, or in lieu of discharging such pollutants to the POTW. This reduction or alteration can be obtained by physical, chemical, or biological processes; by process changes; or by other means, except by diluting the concentration of the pollutants unless allowed by an applicable pretreatment standard. These standards shall mean discharge prohibitions, state pretreatment standards, and local limits. See Sections
13.17.030A,
B and
E, General Sewer Use Requirements.
Public Works Director (PWD)The city of Castle Rock Public Works Direct who oversees the operation of the POTW shall be considered the City's agent. The term also applies to the City's Public Works staff representatives as designated by the PWD.
Publicly Owned Treatment Works or POTWA treatment works, as defined by Section 212 of the Clean Water Act (33 U.S.C. Section
1292), which is owned by the City of Castle Rock and along with treatment works, which is also owned by the City of Castle Rock. This definition includes any devices or systems used in the collection, storage, treatment, recycling, and reclamation of sewage or industrial wastes of a liquid nature and any conveyances, including sanitary sewer and storm sewer collection systems, which convey wastewater to a treatment plant. The POTW and sanitary sewer collection systems shall not be considered to be a User under the provisions of this chapter.
Septic Tank WasteSewage and typically associated solids from activities generating domestic quality sewage, pumped from a septic tank. The PWD may also consider wastes from other holding tanks such as boat blackwater, bilge water, cesspools, commercial or industrial septic tanks, and treatment lagoons to be Septic Tank Waste so long as there are absent pollutants which might interfere with the POTW.
SewageHuman excrement and gray water (from household showers, toilets, kitchens clothes and dish washing, and related domestic activities), wastewater, or water which carries human wastes or a combination of water-carried wastes from residences, businesses, institutions, and industries.
Significant Industrial User or SIUa. Significant Industrial User is a User that:
i. Discharges an average of twenty-five thousand (25,000) gpd or more of process waste water to the POTW (excluding domestic sewage, non-contact cooling water, and boiler blowdown wastewater).
ii. Contributes a processed waste stream that makes up five (5) percent or more of the average dry weather monthly hydraulic organic design capacity of the POTW treatment plant.
iii. Is designated as such by the PWD on the basis that it has a reasonable potential for adversely affecting the POTW's operation or for violating any pretreatment standard or requirement.
b. Upon finding that a User meeting the criteria in subsection a.i or a.ii of this definition has no reasonable potential for adversely affecting the POTW's operation or for violating any pretreatment standard or requirement, the PWD's with the concurrence of WA DOE, may at any time, on the PWD's own initiative or in response to a petition received from a User, in accordance with procedures in 40 CFR Part
403.8(f)(6), determine that such User should not be considered a Significant Industrial User.
Significant Noncompliancea. Any violation of a pretreatment standard or requirement, including numerical limits, narrative standards, and prohibitions, that the WA DOE or the PWD determines has caused, alone or in combination with other Discharges, Interference or Pass Through, including endangering the health of POTW personal or the general public.
b. Any discharge of a pollutant that has caused imminent danger to the public or to the environment, or has resulted in the PWD its emergency authority to halt or prevent such a discharge.
c. Any violation(s) including of Best Management Practices (BMP), which the PWD determines will adversely affect the operation or implementation of the pretreatment program.
d. Chronic violations of wastewater discharge limits, defined as sixty six percent (66%) or more of all of the measurements taken for the same pollutant parameter during a rolling six (6) month period exceed, by any magnitude, a numeric pretreatment standard or requirement, including instantaneous limits of Section
13.17.030, General Sewer Use Requirements.
e. Technical Review Criteria (TRC) violations, defined as thirty-three cent (33%) or more of wastewater measurements taken for each pollutant parameter during a rolling six (6) month period equal or exceed the product of the numeric pretreatment standard or requirement, (including instantaneous limits as defined by this section), multiplied by the applicable criteria. Applicable criteria are 1.4 times the limit for Biochemical Oxygen Demand, Total Suspended Solids, fats, oils and greases, and 1.2 times the limit for all other pollutants except pH.
f. Failure to meet, within ninety (90) days of the scheduled date, a compliance schedule milestone contained in a City Wastewater Discharge Approval (CWDA) or enforcement order for starting construction, completing construction, or attaining final compliance.
g. Failure to provide any required report withing forty-five (45) calendar days after the due date. This includes initial and periodic monitoring reports, and reports on initial compliance and on meeting compliance schedules.
h. Failure to accurately report noncompliance.
Slug load or Slug dischargeAny discharge of a non-routine, episodic nature, including but not limited to an accidental spill or a non-customary batch discharge, which has a reasonable potential to cause Interference or Pass Through, or in any other way violate the POTW's regulations, local limits, or Permit conditions. This includes discharges at a flow rate or concentration that could cause a violation of the Prohibited Discharge Standards of CRMC §
13.17.030.
Sourcesa. Any building structure, facility, or installation from which there is (or may be) a Discharge of pollutants, provided that:
i. The building, structure, facility, or installation is constructed at a site at which no other source is located; or
ii. The building, structure, facility or installation totally replaces the process or production equipment that causes the Discharge of pollutants at an existing source; or
iii. The production or wastewater generating processes of the building, structure, facility, or installation is substantially independent of an existing source at the same site. In determining whether these are substantially independent, factors such as the extent to which the new facility is integrated with the existing plant, and the extent to which the new facility is engaged in the same general type of activity as the existing source, should be considered.
b. Construction on a site at which an existing source is located is considered a modification, rather than a new or changed source, if the construction does not create a new building structure, facility, or installation meeting the criteria of subsection a.ii or a.iii of this definition both otherwise alters, replaces or adds to existing process or production of equipment.
Storm WaterAny flow occurring during or following any form of natural precipitations, and resulting from such precipitation, including snow melt.
Total Suspended Solids or TSSThe total suspended matter that floats on the surface of, or is suspended in, water, wastewater, or other liquid, and which is removable by laboratory filtering.
UserAny person with a source of discharge that does not qualify that person as a Domestic User, who discharges an effluent into the POTW by means of pipes, conduit, pumping stations, force main, tank trucks, constructed drainage ditches, intercepting ditches, and all constructed devices and appliances appurtenant thereto.
WastewaterLiquid and water-carried industrial wastes and sewage from residential dwellings commercial buildings, industrial and manufacturing facilities, and institutions, whether treated or untreated, which are contributed to the POTW.