All requirements set forth in Chapter 70, Excavation and Grading, of the current New Mexico Uniform Building Code shall be made a part of this manufactured housing installation chapter.
In addition, the following requirements shall also apply:
A. 
The slope around the manufactured housing unit shall have at least a six-inch drop per 10 feet.
B. 
On lots of one acre or more in size, the permittee shall only be required to grade a portion of the property which provides drainage for all proposed constructed improvements.
C. 
All subsequent ordinances and regulations passed by the town of Mesilla relating to drainage, design standards for constructed improvements, soil erosion control, etc., shall be made a part of the regulations of this chapter.
D. 
Applicants for permits for the installation of manufactured housing units shall comply with the provisions of Chapter 15.05 MTC, Flood Damage Prevention.
(Prior code § 11-7-3A)
All utility connections shall be in conformance with the current State of New Mexico Manufactured Housing Act and the State Construction Industries Division regulations for utility installations.
Except for telephone and electricity, all other utilities shall be buried, and the town encourages both electricity and phone connections to be buried, whenever possible.
(Prior code § 11-7-3B)
All porches, patios, permanent steps, accessory buildings, additions to a manufactured housing unit and any other constructed improvements on properties within the town of Mesilla shall be required to comply with the Uniform Building Code of the state of New Mexico and the zoning code of the town of Mesilla.
(Prior code § 11-7-3C)