A.
The installation and repair of sewer, drainage and water service lines within the limits of any public street, highway, easement or other public property and the connection of such service lines to the sanitary sewers, stormwater drains and water mains of the City shall be done in accordance with the provisions of the rules and regulations of the Department of Public Works and shall also conform to such specifications as may be promulgated by the Director.[1]
[Amended 6-24-2019 by L.L. No. 3-2019]
B.
The tapping of water mains and the installation and repair of water service lines, in addition to such hereinabove specified rules, regulations and specifications, shall also conform to the rules and regulations of the Water Department.
[Amended 5-14-2007 by L.L. No. 3-2007]
C.
A sewer service line, between its connection point at the sanitary sewer main to the back of the sidewalk or the property line, shall be in conformity with the lines of § 230-16B of the City Code and shall be laid by a licensed plumber.
[Amended 6-8-1992]
D.
A drainage service line, between its connection point at the stormwater drain and a point at least two feet back of existing curb or established or proposed curbline, shall be of heavy cast-iron pipe with lead or other approved joints and shall be laid by a licensed plumber.
E.
Such service lines shall be laid on a straight alignment and uniform gradient of not less than 1/4 inch per foot, unless otherwise specifically authorized by the Director, and having all changes in direction made with approved fittings.