[1]
Editor's Note: See also Ch. 166, Zoning: Planned Development Districts.
A. 
The purpose of the planned development district classification is to provide for the rezoning of land to residential, commercial and industrial development zones either jointly or separately in conformance with provisions and standards which ensure compatibility among all the land uses, foster flexibility and innovation in site planning and development and encourage sound design practices.
(1) 
Provision is included for planned development districts (PDD) to permit establishment of areas in which diverse uses may be brought together in a compatible and unified plan of development which shall be in the interest of the general welfare of the public. In planned development districts, land and structures may be constructed and used for any lawful purpose in accordance with the provisions set forth herein.
B. 
In order to realize the purpose of this section, a PDD shall achieve the following objectives:
(1) 
A choice in housing environment and type, occupancy, tenure (e.g., cooperatives, individual ownership, condominium, leasing), lot sizes, common facilities and handicapped accessibility.
(2) 
More usable open space and recreation areas and, if permitted as part of a project, more convenient locations of accessory commercial and service uses.
(3) 
A development pattern which preserves outstanding natural topography and geological features, scenic vistas, trees and historical sites and prevents the disruption of natural drainage patterns.
(4) 
An efficient use of land resulting in small networks of utilities and streets.
(5) 
A development pattern that preserves the rural character of the Town, is consistent with the land use density, is in harmony with the surrounding neighborhood, and meets the objectives of the Town of Halfmoon Comprehensive Plan and the Town of Halfmoon Zoning Ordinance.
The procedure for obtaining a change in zone for undertaking development within a planned development district shall be as follows:
A. 
The owner (or agent thereof, hereinafter referred to as "owner") of the land shall apply in writing and shall submit four copies of a preliminary development plan to the Town Board as described in § 165-55 and one copy to the Planning Department. The Town Board may refer the application to the Town Planning Board within 60 days of receipt of a completed application. The Town Board shall refer any application for a planned development district that is not denied by action of the Town Board within 60 days of receipt of a completed application.
[Amended 7-16-2014 by L.L. No. 3-2014]
B. 
The Planning Board shall discuss the proposed application and shall review the preliminary development plan with the owner. The Planning Board shall prepare recommendations with regard to the preliminary development plan and, if applicable, the proposed change of zone.
C. 
The Planning Board shall send a copy of its recommendations to the owner indicating its approval in principle or its disapproval. If the preliminary development plan is approved in principle, the Planning Board shall state any specific changes it may require.
D. 
The owner shall submit four copies of an application for change of zone and four copies of a revised preliminary development plan to the Planning Board as described in § 165-55 below.
E. 
The Planning Board shall discuss the preliminary development plan with the owner. The Planning Board will submit its findings to the Town Board as required in § 165-57 within 62 days of receipt of a complete application. A complete application shall mean the completion of all necessary SEQRA documentation to file a negative declaration or statement of findings application. Failure to act within 62 days of receipt of the application will constitute a "no recommendation" opinion by the Planning Board.
F. 
After receipt of the Planning Board's recommendations, public notice shall be given and a public hearing held by the Town Board on the proposed change of zone subject to the specifications of the preliminary development plan.
G. 
After the public hearing and determination by the Town Board, if the Board approves the application the Zoning Map may be amended so as to define the boundaries of the planned development district, but such action shall have the effect only of granting permission for development of the approved preliminary development plan proposal in accordance with the provisions of this article and this chapter. If the zone change and preliminary development plan is approved by the Town Board, an appropriate notation to that effect will be made on the face of four copies of the preliminary development plan. One copy will be retained by the Town Clerk, one copy will be given to the Planning Board, one copy will be returned to the owner, and one copy will be given to the Enforcement Officer. In the event that the Town Board requires modifications in the preliminary development plan, the resolution granting the change of zone shall indicate such modification. In the event the Town Board denies the application, the Clerk shall forward said reasons for denial to the applicant.
H. 
Prior to the issuance of a building permit for any phase of the preliminary development plan, approval shall be obtained as described in § 165-56 and Subsection I below. The Planning Board shall note approval on four copies of the development plan and distribute them in the manner described in Subsection G above.
I. 
In accordance with § 277 of the Town Law, the developer shall post a performance bond or other guarantee of financial capability which is acceptable to the Town Board, in the amount of an engineer's estimate for items in numbers B, C and E of the development plan,[1] by phase, including all utility installations and infrastructure improvements both on and off site as approved by the Town Engineer.
[1]
Editor's Note: See § 165-56A(2), (3) and (5).
J. 
The resolution by the Town Board amending the Zoning Map for the planned development district shall specify the time period for commencement and/or completion of the development and shall indicate that the appropriate action will be taken to revert the zoning of the subject property to its previous zoning if the conditions are not met.
A. 
The owner shall submit an application for a change of zone, with a preliminary development plan which shall include the following:
(1) 
Survey of the property, showing existing features of the property, including contours, buildings, structures, trees over four inches in trunk diameter, streams, wetlands, streets, utility easements, rights-of-way and adjacent land use.
(2) 
Proposed site plan, showing building locations, occupancy and land use areas, including any subdivision intended within the district.
(3) 
Proposed traffic circulation, parking areas, pedestrian walks and landscaping.
(4) 
Proposed construction sequence for buildings, parking spaces and landscaped areas.
(5) 
Proposed public utilities plan including water supply sewerage and storm drainage.
(6) 
Long environmental assessment form or draft environmental impact statement, as required by the Town Board.
A. 
The owner shall submit a development plan to the Planning Board for review, prior to the issuance of a building permit. Plans and specifications shall bear the signature of the person responsible for the design and drawings and, where required by § 7302, as amended, of Article 147 of the Education Law of the State of New York, the seal of a licensed architect or licensed professional engineer.
(1) 
Site plan showing proposed building locations and land use areas.
(2) 
Traffic circulation, required parking and loading areas and pedestrian walls.
(3) 
Landscaping plan, including site grading and landscape plantings and structures.
(4) 
Preliminary drawings of buildings to be constructed in the current phase, including floor plans, exterior elevations and sections.
(5) 
Final engineering plans, including street improvements, drainage system, and public utility extension. All such improvements shall comply with construction standards outlined in Town of Halfmoon Standard Specifications for Street Improvements, Town of Halfmoon Subdivision Regulations, Town of Halfmoon Water Standards and be approved by the New York State Department of Health.[1]
[1]
Editor's Note: See Ch. 74, Design and Construction Standards; Ch. 143, Subdivision of Land; Ch. 160, Water Rules, Regulations and Construction Standards, respectively.
(6) 
Engineering feasibility studies for the solution of any anticipated problems which might arise due to the proposed development, as required by the Planning Board.
(7) 
Construction sequence and time schedule for completion of each phase for buildings, parking spaces, landscaped areas, stormwater management areas and off-site improvements, if applicable.
(8) 
All improvements shall be designed in accordance with the Town of Halfmoon Design and Construction Standards, Chapter 74 of the Town's Code.
[Added 2-1-2005 by L.L. No. 2-2005]
B. 
This final development plan shall be in general conformance with the approved preliminary development plan. Such approval shall be secured by the owner for each phase of the development. Such approval for each phase, shall be valid for a term approved by the Town Board, at which time, unless the proposed development has been completed or the completion date is extended by resolution of the Town Board, the development plan approval shall terminate and no additional building permits shall be issued. If two or more lots (with separate deeds) are provided in the planned development district, a subdivision plan must be approved in accordance with the subdivision regulations of the Town. All lots shall have frontage on an accepted Town, county, or state road.
A. 
The Planning Board, after determining that the requirements of the Zoning Ordinance dealing with planned development districts have been met, shall recommend the approval, approval with modifications, or disapproval of the preliminary development plan to the Town Board. The Planning Board shall enter its reasons for such action in its records and transmit its findings by resolution to the Town Board. The Planning Board may recommend the establishment of a planned development district, provided that they find the facts submitted with the development plan establish that:
(1) 
The uses proposed will not be detrimental to present and potential surrounding uses.
(2) 
Land surrounding the proposed development can be developed in coordination with the proposed development and be compatible in use.
(3) 
The proposed change to a planned development district is in conformance with the general intent of the Comprehensive Plan of the Town.
(4) 
Existing and proposed streets are suitable and adequate to carry anticipated traffic within the proposed district and in the vicinity of the proposed district.
(5) 
Existing and proposed utility services are adequate for the proposed development.
(6) 
Each phase of the proposed development, as it is proposed to be completed, contains the required parking spaces, landscape and utility areas necessary for creating and sustaining a desirable and stable environment.
The standards for planned development districts are to provide the Planning Board with a means to evaluate applications for these districts consistent with the provisions and general intent of the Zoning Ordinance and the Comprehensive Plan of the Town.
A. 
Minimum project area. The minimum project area for a planned development district shall be 10 contiguous acres of land. The Town Board, following a favorable report from the Planning Board, may consider projects of lesser acreage where the applicant can demonstrate that the characteristics of his holdings or the intended land use meet the purpose of this article.
B. 
Project ownership. The project land may be owned, used or controlled either by an individual, partnership or corporation or by a group of individuals or corporations. Such ownership may be a public or private corporation. The Town Board shall be notified within three business days of any changes in project ownership. The approved project shall be binding on the project land, owner(s) and successors.
C. 
The applicant must demonstrate that public and/or private utilities and services can accommodate the proposed PDD. The PDD shall be served by adequate facilities including streets, fire protection, water, stormwater control and sanitary sewer.
D. 
Any soil disturbing activities or clear cutting by the developer or his representative shall meet the requirements of Article IX, § 165-42, Soil disturbance.
E. 
Density: The allowable density as outlined in the sections below shall be based on buildable land. PDD applications that include housing units in other than residential zones shall adhere to the regulations of the residential zone closest to the site for which the application is being made. Land that meets the following criteria will not be included in the calculation of buildable land:
(1) 
Freshwater wetlands as regulated pursuant to federal and/or New York State Department of Environmental Conservation regulations for designated wetlands.
(2) 
Water sources classified pursuant to the New York State Department of Environmental Conservation Stream Classification System.
(3) 
Critical environmental areas as designated by the New York State Department of Environmental Conservation.
(4) 
Slopes in excess of 15%.
(5) 
Other areas of environmental or scenic significance as may be identified by the Planning Board, Town Board or the Town of Halfmoon Comprehensive Plan.
(a) 
PDDs that meet unique criteria may be granted an increase in density. Examples of unique criteria shall be as follows:
[1] 
Providing housing opportunities pursuant to low- and moderate-income programs under federal or state guidelines.
[2] 
The inclusion of Town-wide public recreational facilities and/or other community facilities deemed appropriate by the Town.
[3] 
The provision of open space above the requirements outlined in this article especially if the open space is creatively connected with existing open space.
(b) 
Planned development districts that are designed exclusively to provide housing and auxiliary services for senior citizens, as defined by federal and state regulations, and meet the following criteria may also be granted a higher density beyond those listed in § 165-60. Examples of criteria shall be as follows:
[1] 
The minimum size of a dwelling unit shall be 600 square feet.
[2] 
No more than two bedrooms per dwelling unit.
[3] 
Availability of appropriate on-site services, such as personal service, health service, and other services specifically oriented to serve a retirement community.
[4] 
Provides recreational or community facilities designed for the residents of the PDD.
F. 
The following standards in §§ 165-60, 165-61, 165-62, 165-63 and 165-64 are intended to provide the necessary latitude for the developer to make creative and efficient use of his property.
[Amended 7-16-2014 by L.L. No. 3-2014; 11-16-2022 by L.L. No. 8-2022]
A. 
Planned development - residential, the following uses may be permitted:
(1) 
One-family dwelling; two-family dwelling.
(2) 
Multiple-family dwelling.
(3) 
Professional office-residence.
(4) 
Religious institution.
(5) 
School.
(6) 
Community center.
(7) 
Membership clubhouse.
(8) 
Public outdoor recreation.
(9) 
Nursing or convalescent home.
(10) 
Accessory uses.
(11) 
Parking.
B. 
Area, yard, coverage and supplementary regulations.
(1) 
District area minimum: 10 acres.
(2) 
Densities.
(a) 
One-family dwellings: three dwelling units per buildable acre.
(b) 
Two-family dwellings: four dwelling units per buildable acre.
(c) 
Townhouse/multiple-family dwellings: 10 dwelling units per buildable acre.
(3) 
Minimum yards required:
(a) 
Permitted residential uses: Front yards, rear yards and side yards for residential uses shall be designed so that no building is closer than 20 feet to any other building, and no building is closer than 35 feet to the boundary line of any public street.
(b) 
Other permitted uses: front, side, rear yards to be at least 20 feet.
(4) 
Maximum building coverage (of any single lot, or the district as a whole): 30%.
(5) 
Maximum height of structures: to be submitted to the Planning Board and approved by the Town Board as a part of the development plan, after review of plans and recommendations in writing are received from the Building, Planning, and Development Coordinator and local Fire Chief.
(6) 
Off-street parking and loading spaces: See §§ 165-35, 165-36 and 165-64.
(7) 
Common open space: An area in addition to required lot area, equal to 10% of the gross development area, shall be developed and maintained as common open space. Such common open space shall be developed for active recreation (with facilities), or sitting areas (with facilities) or bicycle, walking or horse trails (marked by developed paths), or developed wooded areas (cleared of underbrush) or any other uses found appropriate by the Planning Board. Open space shall not be sold off as a separate subdivision and shall not be used for future building lots.
(8) 
Signs and displays: See § 165-48.
A. 
Planned development - business, the following uses may be permitted.
(1) 
Retail stores, restaurants.
(2) 
Business offices.
(3) 
Hotels, motels.
(4) 
Religious institutions.
(5) 
Community centers and government buildings.
(6) 
Indoor recreation.
(7) 
Personal services.
(8) 
Enclosed accessory uses.
(9) 
Parking.
B. 
Area, yard coverage and supplementary regulations.
(1) 
District area minimum: 10 acres.
(2) 
Front yard minimum: 50 feet.
(3) 
Rear yard minimum: 25 feet or 100 feet of open space when abutting residential uses or district, 50 feet of which shall be used for landscaping or as a no-cut buffer at the discretion of the Planning Board. For purposes of this section, apartments shall be considered a commercial use.
[Amended 5-3-2017 by L.L. No. 1-2017]
(4) 
Side yard minimum: 15 feet or 100 feet of open space when abutting residential uses or district, 50 feet of which shall be used for landscaping or as a no-cut buffer at the discretion of the Planning Board. No side yard is required for commercial buildings with separating fire walls. For purposes of this section, apartments shall be considered a commercial use.
[Amended 5-3-2017 by L.L. No. 1-2017]
(5) 
Coverage maximum (of any single lot or the district as a whole): 40%.
(6) 
Maximum height of structure: as in § 165-60B(5) above.
(7) 
Off-street parking and loading spaces: see §§ 165-35, 165-36 and 165-63.
(8) 
Signs and displays: see § 165-49.
A. 
Planned development - industrial, the following uses may be permitted
(1) 
Manufacturing industries.
(2) 
Machinery and equipment sales.
(3) 
Warehouse.
(4) 
Wholesale uses.
(5) 
Public utilities.
(6) 
Enclosed service and repair.
(7) 
Trucking and freight terminal.
(8) 
Enclosed industrial processes and services.
(9) 
Garage for repair of automotive equipment.
(10) 
Enclosed accessory uses.
(11) 
Parking.
B. 
Area, yard, coverage and supplementary regulations.
(1) 
District area minimum: 10 acres.
(2) 
Front yard minimum: 50 feet.
(3) 
Rear yard minimum: 25 feet or 100 feet of open space when abutting residential uses or districts, 50 feet of which shall be used for landscaping at the discretion of the Planning Board. For purposes of this section, apartments shall be considered a commercial use.
[Amended 5-3-2017 by L.L. No. 1-2017]
(4) 
Side yard minimum: 25 feet or 100 feet of open space when abutting residential uses or districts, 50 feet of which shall be used for landscaping at the discretion of the Planning Board. No side yard is required for industrial buildings with separating fire walls. For purposes of this section, apartments shall be considered a commercial use.
[Amended 5-3-2017 by L.L. No. 1-2017]
(5) 
Coverage maximum (of any single lot or the district as a whole): 50%.
(6) 
Maximum height of structures: as in § 165-60B(5) above.
(7) 
Off-street parking and loading spaces: see §§ 165-35, 165-36 and 165-63.
(8) 
Signs and displays: see § 165-49.
A. 
Planned development - recreational, the following uses may be permitted:
(1) 
Golf courses.
(2) 
Ski areas.
(3) 
Parks.
(4) 
Zoos and botanical gardens.
(5) 
Game preserves and hunting courses.
(6) 
Golf driving ranges and putting courses.
(7) 
Marina.
(8) 
Campgrounds.
(9) 
Other outdoor recreational uses.
(10) 
All uses customarily accessory to such permitted uses.
B. 
Area, yard, coverage and supplementary regulations:
(1) 
District area minimum: 10 acres.
(2) 
Minimum front yard: 75 feet.
(3) 
Minimum rear yard: 100 feet.
(4) 
Minimum side yard: 100 feet.
(5) 
Maximum coverage: 40%.
(6) 
Maximum height: see § 165-60B(5) above.
(7) 
Off-street parking, etc.: see §§ 165-35, 165-36 and 165-63.
(8) 
Signs and displays: see § 165-49.
A. 
Off-street parking requirements:
(1) 
For every building hereafter erected, altered, extended or changed in use, there shall be provided off-street parking spaces according to the design criteria set forth below, and as provided in § 165-35 of the chapter.
(2) 
A required parking space shall be at least 10 feet wide by 20 feet long and shall be reached by an access driveway at least 20 feet clear in width.
(3) 
Any parking lot or parking area that will contain more than 100 cars shall be effectively divided by planted divider strips or curbing fixed in place so as to effectively divide each parking area of 100 cars from other driveways and parking areas for the purpose of ensuring safety of vehicles moving within the entire parking area and to control speed.
(4) 
Ingress and egress to parking areas in commercial and industrial developments shall be no closer to one another than 150 feet along Town streets, and access to individual uses and parking areas shall be from a service road.
(5) 
All parking shall be adequately lighted as determined by the Planning Board.
B. 
Off-street loading space requirements.
(1) 
For every building hereafter erected, altered, extended or changed in use for the purpose of business, trade or industry, there shall be provided off-street space for loading and unloading of vehicles as set forth in § 165-36. The required loading space shall be at least 12 feet wide by 40 feet long by 14 feet clear vertical height.
(2) 
Off-street loading space (or spaces) located within 50 feet of a residential property shall be shielded by wall, fencing or other suitable material which shall serve to screen noise and fumes that originate in said loading zone.