All streetlights and lighting standards shall
be installed in accordance with the specifications of the Incorporated
Village of Manorhaven.
All sanitary sewers shall be constructed in
accordance with the requirements of the Incorporated Village of Manorhaven
and the specifications of the Nassau County Department of Public Works.
Monuments shall be reinforced concrete or stone
and shall be four inches square with a length of at least 36 inches
and shall be embedded the full depth.
Street signs shall be placed at all intersections
and shall be constructed as follows:
A. Standard. Steel post three inches in diameter or galvanized
iron 2 1/2 inches in diameter, 10 feet in length embedded in
concrete, 7 1/2 feet above grade, shed at the top with post cap.
B. Sign. Galvanized or bonderized steel, 12 gauge, 4 1/2
inches in width by a length of between 19 and 30 inches, securely
fastened to a post cap to prevent swinging or turning. The sign shall
be of durable finish with letters of at least two inches in height.
C. Street signs of different design and specification
may be placed only upon approval of the Board.
Bulkheading shall be constructed in accordance
with the specifications of the Incorporated Village of Manorhaven
and the applicable regulations of other governmental agencies with
jurisdiction over the same.
The Board will employ inspectors to ensure the
satisfactory completion of improvements and utilities required by
the Board. If the applicant elects to install such improvements and
utilities before the final approval of the plat, the applicant shall
notify the Board in writing and an inspector will be assigned thereto.
If a bond is to be given to insure completion of such improvements,
the Board will assign an inspector to ensure such satisfactory completion
after final approval of the plat. The developer shall pay to the village
the cost of such inspections.